[PATCH v2] dt-bindings: drm: rcar-du: Document optional reset properties

[Rob Herring]

On Mon, Mar 06, 2017 at 05:25:56PM +0100, Geert Uytterhoeven wrote:
> Document the optional properties for describing module resets, to
> support resetting display channels and LVDS encoders on R-Car Gen2 and
> Gen3.
> 
> Signed-off-by: Geert Uytterhoeven <geert+renesas at glider.be>
> ---
> See "[v2,1/4] dt-bindings: clock: renesas: cpg-mssr: Document reset control
> support" (https://patchwork.kernel.org/patch/9536627/) for the format of
> a reset specifier in the Renesas CPG/MSSR case.
> 
> E.g. "resets = <&cpg 310>;"
> 
> v2:
>   - s/phandles/phandle/.
> ---
>  Documentation/devicetree/bindings/display/renesas,du.txt | 10 ++++++++++
>  1 file changed, 10 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/display/renesas,du.txt b/Documentation/devicetree/bindings/display/renesas,du.txt
> index 1a02f099a0ff0a3a..3db418c827193e82 100644
> --- a/Documentation/devicetree/bindings/display/renesas,du.txt
> +++ b/Documentation/devicetree/bindings/display/renesas,du.txt
> @@ -36,6 +36,16 @@ Required Properties:
>        When supplied they must be named "dclkin.x" with "x" being the input
>        clock numerical index.
>  
> +Optional properties:
> +  - resets: A list of phandle + reset-specifier pairs, one for each entry in
> +    the reset-names property.
> +  - reset-names: Names of the resets. This property is model-dependent.
> +    - R8A779[0123456] use one reset for a group of one or more successive
> +      channels, and one reset per LVDS encoder (if available). The resets
> +      must be named "du.x" with "x" being the numerical index of the lowest
> +      channel in the group. The LVDS resets must be named "lvds.x" with "x"
> +      being the LVDS encoder numerical index.

LVDS is not a separate block?

> +
>  Required nodes:
>  
>  The connections to the DU output video ports are modeled using the OF graph
> -- 
> 2.7.4
>