[PATCH] drm: bridge: dw-hdmi: add HDMI vendor specific infoframe config

Archit Taneja architt at codeaurora.org
Tue Mar 21 07:51:37 UTC 2017



On 03/21/2017 01:17 PM, Andrzej Hajda wrote:
> On 20.03.2017 07:10, Nickey Yang wrote:
>> Vendor specific infoframe is mandatory for 4K2K resolution.
>> Without this, the HDMI protocol compliance fails.
>>
>> Signed-off-by: Nickey Yang <nickey.yang at rock-chips.com>
>> ---
>>  drivers/gpu/drm/bridge/dw-hdmi.c | 50 ++++++++++++++++++++++++++++++++++++++++
>>  drivers/gpu/drm/bridge/dw-hdmi.h |  4 ++++
>>  2 files changed, 54 insertions(+)
>>
>> diff --git a/drivers/gpu/drm/bridge/dw-hdmi.c b/drivers/gpu/drm/bridge/dw-hdmi.c
>> index 9a9ec27..79e2e48 100644
>> --- a/drivers/gpu/drm/bridge/dw-hdmi.c
>> +++ b/drivers/gpu/drm/bridge/dw-hdmi.c
>> @@ -1195,6 +1195,55 @@ static void hdmi_config_AVI(struct dw_hdmi *hdmi, struct drm_display_mode *mode)
>>  	hdmi_writeb(hdmi, (frame.right_bar >> 8) & 0xff, HDMI_FC_AVISRB1);
>>  }
>>
>> +static void hdmi_config_vendor_specific_infoframe(struct dw_hdmi *hdmi,
>> +						 struct drm_display_mode *mode)
>> +{
>> +	struct hdmi_vendor_infoframe frame;
>> +	u8 buffer[10];
>> +	ssize_t err;
>> +
>> +	err = drm_hdmi_vendor_infoframe_from_display_mode(&frame, mode);
>> +	if (err) {
>> +		dev_err(hdmi->dev,
>> +			"Failed to get vendor infoframe from mode: %zd\n", err);
>> +		return;
>> +	}
>> +
>> +	err = hdmi_vendor_infoframe_pack(&frame, buffer, sizeof(buffer));
>> +	if (!err) {
>> +		dev_err(hdmi->dev, "Failed to pack vendor infoframe: %zd\n",
>> +			err);
>> +		return;
>> +	}
>
> AFAIK function returns number of packed bytes or -EINVAL so the check is
> incorrect, and -EINVAL means that there is no need to generate vendor
> infoframe, so definitely not dev_err.

I queued this to drm-misc-next before you posted this. We can have a follow
up patch to fix this (since we don't rebase drm-misc).

Thanks,
Archit


>
>> +	hdmi_modb(hdmi, 0 << HDMI_FC_DATAUTO0_VSD_OFFSET,
>> +		  HDMI_FC_DATAUTO0_VSD_MASK, HDMI_FC_DATAUTO0);
>
> I see no gain in constructs (0 << HDMI_FC_DATAUTO0_VSD_OFFSET),
> additionally mask and offset are redundant (mask == 1 << offset), but it
> seems you follow existing practice, so I do not oppose :)
>
> Regards
> Andrzej
>
>> +
>> +	/* Set the length of HDMI vendor specific InfoFrame payload */
>> +	hdmi_writeb(hdmi, buffer[2], HDMI_FC_VSDSIZE);
>> +
>> +	/* Set 24bit IEEE Registration Identifier */
>> +	hdmi_writeb(hdmi, buffer[4], HDMI_FC_VSDIEEEID0);
>> +	hdmi_writeb(hdmi, buffer[5], HDMI_FC_VSDIEEEID1);
>> +	hdmi_writeb(hdmi, buffer[6], HDMI_FC_VSDIEEEID2);
>> +
>> +	/* Set HDMI_Video_Format and HDMI_VIC/3D_Structure */
>> +	hdmi_writeb(hdmi, buffer[7], HDMI_FC_VSDPAYLOAD0);
>> +	hdmi_writeb(hdmi, buffer[8], HDMI_FC_VSDPAYLOAD1);
>> +
>> +	if (frame.s3d_struct >= HDMI_3D_STRUCTURE_SIDE_BY_SIDE_HALF)
>> +		hdmi_writeb(hdmi, buffer[9], HDMI_FC_VSDPAYLOAD2);
>> +
>> +	/* Packet frame interpolation */
>> +	hdmi_writeb(hdmi, 1, HDMI_FC_DATAUTO1);
>> +
>> +	/* Auto packets per frame and line spacing */
>> +	hdmi_writeb(hdmi, 0x11, HDMI_FC_DATAUTO2);
>> +
>> +	/* Configures the Frame Composer On RDRB mode */
>> +	hdmi_modb(hdmi, 1 << HDMI_FC_DATAUTO0_VSD_OFFSET,
>> +		  HDMI_FC_DATAUTO0_VSD_MASK, HDMI_FC_DATAUTO0);
>> +}
>> +
>>  static void hdmi_av_composer(struct dw_hdmi *hdmi,
>>  			     const struct drm_display_mode *mode)
>>  {
>> @@ -1446,6 +1495,7 @@ static int dw_hdmi_setup(struct dw_hdmi *hdmi, struct drm_display_mode *mode)
>>
>>  		/* HDMI Initialization Step F - Configure AVI InfoFrame */
>>  		hdmi_config_AVI(hdmi, mode);
>> +		hdmi_config_vendor_specific_infoframe(hdmi, mode);
>>  	} else {
>>  		dev_dbg(hdmi->dev, "%s DVI mode\n", __func__);
>>  	}
>> diff --git a/drivers/gpu/drm/bridge/dw-hdmi.h b/drivers/gpu/drm/bridge/dw-hdmi.h
>> index 325b0b8..c59f87e 100644
>> --- a/drivers/gpu/drm/bridge/dw-hdmi.h
>> +++ b/drivers/gpu/drm/bridge/dw-hdmi.h
>> @@ -854,6 +854,10 @@ enum {
>>  	HDMI_FC_DBGFORCE_FORCEAUDIO = 0x10,
>>  	HDMI_FC_DBGFORCE_FORCEVIDEO = 0x1,
>>
>> +/* FC_DATAUTO0 field values */
>> +	HDMI_FC_DATAUTO0_VSD_MASK = 0x08,
>> +	HDMI_FC_DATAUTO0_VSD_OFFSET = 3,
>> +
>>  /* PHY_CONF0 field values */
>>  	HDMI_PHY_CONF0_PDZ_MASK = 0x80,
>>  	HDMI_PHY_CONF0_PDZ_OFFSET = 7,
>
>

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project


More information about the dri-devel mailing list