[PATCHv2 28/31] drm/omap: displays: panel-dpi: Support for handling backlight devices
Tomi Valkeinen
tomi.valkeinen at ti.com
Fri Mar 24 09:40:49 UTC 2017
From: Peter Ujfalusi <peter.ujfalusi at ti.com>
The associated backlight device can be configured via DT by providing the
phandle to the device.
If the backlight device is configured, the driver can manage the backligt
along with the panel's power state, iow it can turn on the backlight when
the panel is enabled and turn it off when the panel is disabled.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi at ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen at ti.com>
---
drivers/gpu/drm/omapdrm/displays/panel-dpi.c | 37 ++++++++++++++++++++++++++--
1 file changed, 35 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/omapdrm/displays/panel-dpi.c b/drivers/gpu/drm/omapdrm/displays/panel-dpi.c
index 38003208d9ca..51fc78eb212c 100644
--- a/drivers/gpu/drm/omapdrm/displays/panel-dpi.c
+++ b/drivers/gpu/drm/omapdrm/displays/panel-dpi.c
@@ -16,6 +16,7 @@
#include <linux/of.h>
#include <linux/of_gpio.h>
#include <linux/regulator/consumer.h>
+#include <linux/backlight.h>
#include <video/omap-panel-data.h>
#include <video/of_display_timing.h>
@@ -30,6 +31,8 @@ struct panel_drv_data {
struct videomode vm;
+ struct backlight_device *backlight;
+
/* used for non-DT boot, to be removed */
int backlight_gpio;
@@ -97,6 +100,11 @@ static int panel_dpi_enable(struct omap_dss_device *dssdev)
if (gpio_is_valid(ddata->backlight_gpio))
gpio_set_value_cansleep(ddata->backlight_gpio, 1);
+ if (ddata->backlight) {
+ ddata->backlight->props.power = FB_BLANK_UNBLANK;
+ backlight_update_status(ddata->backlight);
+ }
+
dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
return 0;
@@ -113,6 +121,11 @@ static void panel_dpi_disable(struct omap_dss_device *dssdev)
if (gpio_is_valid(ddata->backlight_gpio))
gpio_set_value_cansleep(ddata->backlight_gpio, 0);
+ if (ddata->backlight) {
+ ddata->backlight->props.power = FB_BLANK_POWERDOWN;
+ backlight_update_status(ddata->backlight);
+ }
+
gpiod_set_value_cansleep(ddata->enable_gpio, 0);
regulator_disable(ddata->vcc_supply);
@@ -209,6 +222,7 @@ static int panel_dpi_probe_of(struct platform_device *pdev)
{
struct panel_drv_data *ddata = platform_get_drvdata(pdev);
struct device_node *node = pdev->dev.of_node;
+ struct device_node *bl_node;
struct omap_dss_device *in;
int r;
struct display_timing timing;
@@ -236,10 +250,19 @@ static int panel_dpi_probe_of(struct platform_device *pdev)
ddata->backlight_gpio = -ENOENT;
+ bl_node = of_parse_phandle(node, "backlight", 0);
+ if (bl_node) {
+ ddata->backlight = of_find_backlight_by_node(bl_node);
+ of_node_put(bl_node);
+
+ if (!ddata->backlight)
+ return -EPROBE_DEFER;
+ }
+
r = of_get_display_timing(node, "panel-timing", &timing);
if (r) {
dev_err(&pdev->dev, "failed to get video timing\n");
- return r;
+ goto free_backlight;
}
videomode_from_timing(&timing, &ddata->vm);
@@ -247,12 +270,19 @@ static int panel_dpi_probe_of(struct platform_device *pdev)
in = omapdss_of_find_source_for_first_ep(node);
if (IS_ERR(in)) {
dev_err(&pdev->dev, "failed to find video source\n");
- return PTR_ERR(in);
+ r = PTR_ERR(in);
+ goto free_backlight;
}
ddata->in = in;
return 0;
+
+free_backlight:
+ if (ddata->backlight)
+ put_device(&ddata->backlight->dev);
+
+ return r;
}
static int panel_dpi_probe(struct platform_device *pdev)
@@ -321,6 +351,9 @@ static int __exit panel_dpi_remove(struct platform_device *pdev)
omap_dss_put_device(in);
+ if (ddata->backlight)
+ put_device(&ddata->backlight->dev);
+
return 0;
}
--
2.7.4
More information about the dri-devel
mailing list