[PATCH 05/11] drm/vmwgfx: Add and connect CRTC helper functions
Daniel Vetter
daniel at ffwll.ch
Tue Mar 28 07:56:20 UTC 2017
On Mon, Mar 27, 2017 at 03:00:58PM -0700, Sinclair Yeh wrote:
> Atomic mode set requires us to refactor existing vmw_stdu_crtc_set_config
> code into sections that check the validity of the new mode, and sections
> that actually program the hardware state.
>
> vmw_du_crtc_atomic_check() takes CRTC-related checking code. In a later
> patch, vmw_du_primary_plane_atomic_check() will take framebuffer-related
> checking code.
>
> These helpers won't be called until we flip on the atomic support
> flag or set drm_crtc_funcs->set_config to using the atomic
> helper.
>
> v2:
> * The state->num_connector is actually the total number of potential
> connectors, not just the one associated with the display unit.
> The proper one to check is ->connector_mask.
>
> * Add the check to only allow plane state to be the same as crtc state
> (Thanks to mlankhorst)
>
> * Make sure to turn on SVGA mode before using VRAM. SVGA mode is
> disabled in master_drop if dbdev is not running.
>
> Signed-off-by: Sinclair Yeh <syeh at vmware.com>
> Signed-off-by: Thomas Hellstrom <thellstrom at vmware.com>
> Reviewed-by: Thomas Hellstrom <thellstrom at vmware.com>
> ---
> drivers/gpu/drm/vmwgfx/vmwgfx_kms.c | 48 ++++++++++++++
> drivers/gpu/drm/vmwgfx/vmwgfx_kms.h | 9 +++
> drivers/gpu/drm/vmwgfx/vmwgfx_ldu.c | 79 +++++++++++++++++++++++
> drivers/gpu/drm/vmwgfx/vmwgfx_scrn.c | 119 +++++++++++++++++++++++++++++++++++
> drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c | 117 ++++++++++++++++++++++++++++++++++
> 5 files changed, 372 insertions(+)
>
> diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
> index a8e0909..6f0f160 100644
> --- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
> +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
> @@ -399,6 +399,54 @@ void vmw_du_primary_plane_destroy(struct drm_plane *plane)
> }
>
>
> +int vmw_du_crtc_atomic_check(struct drm_crtc *crtc,
> + struct drm_crtc_state *new_state)
> +{
> + struct vmw_display_unit *du = vmw_crtc_to_du(new_state->crtc);
> + int connector_mask = 1 << drm_connector_index(&du->connector);
> + bool has_primary = new_state->plane_mask &
> + BIT(drm_plane_index(crtc->primary));
> +
> + /* We always want to have an active plane with an active CRTC */
> + if (has_primary != new_state->enable)
> + return -EINVAL;
> +
> +
> + if (new_state->connector_mask != connector_mask &&
> + new_state->connector_mask != 0) {
> + DRM_ERROR("Invalid connectors configuration\n");
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> +
> +void vmw_du_crtc_atomic_begin(struct drm_crtc *crtc,
> + struct drm_crtc_state *old_crtc_state)
> +{
> +}
> +
> +
> +void vmw_du_crtc_atomic_flush(struct drm_crtc *crtc,
> + struct drm_crtc_state *old_crtc_state)
> +{
> + struct drm_pending_vblank_event *event = crtc->state->event;
> +
> + if (event) {
> + crtc->state->event = NULL;
> +
> + spin_lock_irq(&crtc->dev->event_lock);
> + if (drm_crtc_vblank_get(crtc) == 0)
> + drm_crtc_arm_vblank_event(crtc, event);
> + else
> + drm_crtc_send_vblank_event(crtc, event);
> + spin_unlock_irq(&crtc->dev->event_lock);
> + }
> +
> +}
> +
> +
> /**
> * vmw_du_crtc_duplicate_state - duplicate crtc state
> * @crtc: DRM crtc
> diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.h b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.h
> index cc50bf3..f711b5d 100644
> --- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.h
> +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.h
> @@ -161,6 +161,7 @@ struct vmw_crtc_state {
> * @surf Display surface for STDU
> * @dmabuf display dmabuf for SOU
> * @content_fb_type Used by STDU.
> + * @dmabuf_size Size of the dmabuf, used by Screen Object Display Unit
> * @pinned pin count for STDU display surface
> */
> struct vmw_plane_state {
> @@ -169,6 +170,7 @@ struct vmw_plane_state {
> struct vmw_dma_buffer *dmabuf;
>
> int content_fb_type;
> + unsigned long dmabuf_size;
>
> int pinned;
> };
> @@ -342,10 +344,17 @@ int vmw_du_cursor_plane_update(struct drm_plane *plane,
> uint32_t src_x, uint32_t src_y,
> uint32_t src_w, uint32_t src_h);
>
> +/* Atomic Helpers */
> void vmw_du_plane_reset(struct drm_plane *plane);
> struct drm_plane_state *vmw_du_plane_duplicate_state(struct drm_plane *plane);
> void vmw_du_plane_destroy_state(struct drm_plane *plane,
> struct drm_plane_state *state);
> +int vmw_du_crtc_atomic_check(struct drm_crtc *crtc,
> + struct drm_crtc_state *state);
> +void vmw_du_crtc_atomic_begin(struct drm_crtc *crtc,
> + struct drm_crtc_state *old_crtc_state);
> +void vmw_du_crtc_atomic_flush(struct drm_crtc *crtc,
> + struct drm_crtc_state *old_crtc_state);
> void vmw_du_crtc_reset(struct drm_crtc *crtc);
> struct drm_crtc_state *vmw_du_crtc_duplicate_state(struct drm_crtc *crtc);
> void vmw_du_crtc_destroy_state(struct drm_crtc *crtc,
> diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_ldu.c b/drivers/gpu/drm/vmwgfx/vmwgfx_ldu.c
> index 276c744..d547e80 100644
> --- a/drivers/gpu/drm/vmwgfx/vmwgfx_ldu.c
> +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_ldu.c
> @@ -167,6 +167,7 @@ static int vmw_ldu_add_active(struct vmw_private *vmw_priv,
> if (vfb != ld->fb) {
> if (ld->fb && ld->fb->unpin)
> ld->fb->unpin(ld->fb);
> + vmw_svga_enable(vmw_priv);
> if (vfb->pin)
> vfb->pin(vfb);
> ld->fb = vfb;
> @@ -190,6 +191,68 @@ static int vmw_ldu_add_active(struct vmw_private *vmw_priv,
> return 0;
> }
>
> +/**
> + * vmw_ldu_crtc_mode_set_nofb - Enable svga
> + *
> + * @crtc: CRTC associated with the new screen
> + *
> + * For LDU, just enable the svga
> + */
> +static void vmw_ldu_crtc_mode_set_nofb(struct drm_crtc *crtc)
> +{
> +}
> +
> +/**
> + * vmw_ldu_crtc_helper_prepare - Noop
> + *
> + * @crtc: CRTC associated with the new screen
> + *
> + * Prepares the CRTC for a mode set, but we don't need to do anything here.
> + *
> + */
> +static void vmw_ldu_crtc_helper_prepare(struct drm_crtc *crtc)
> +{
> +}
> +
> +/**
> + * vmw_ldu_crtc_helper_commit - Noop
> + *
> + * @crtc: CRTC associated with the new screen
> + *
> + * This is called after a mode set has been completed. Here's
> + * usually a good place to call vmw_ldu_add_active/vmw_ldu_del_active
> + * but since for LDU the display plane is closely tied to the
> + * CRTC, it makes more sense to do those at plane update time.
> + */
> +static void vmw_ldu_crtc_helper_commit(struct drm_crtc *crtc)
> +{
> + struct vmw_private *dev_priv;
> + struct vmw_legacy_display_unit *ldu;
> + struct vmw_framebuffer *vfb;
> + struct drm_framebuffer *fb;
> +
> +
> + ldu = vmw_crtc_to_ldu(crtc);
> + dev_priv = vmw_priv(crtc->dev);
> + fb = crtc->primary->fb;
> +
> + vfb = (fb) ? vmw_framebuffer_to_vfb(fb) : NULL;
> +
> + if (vfb)
> + vmw_ldu_add_active(dev_priv, ldu, vfb);
> + else
> + vmw_ldu_del_active(dev_priv, ldu);
> +}
> +
> +/**
> + * vmw_ldu_crtc_helper_disable - Turns off CRTC
> + *
> + * @crtc: CRTC to be turned off
> + */
> +static void vmw_ldu_crtc_helper_disable(struct drm_crtc *crtc)
> +{
> +}
> +
> static int vmw_ldu_crtc_set_config(struct drm_mode_set *set)
> {
> struct vmw_private *dev_priv;
> @@ -346,6 +409,20 @@ static const struct drm_plane_funcs vmw_ldu_cursor_funcs = {
> .atomic_destroy_state = vmw_du_plane_destroy_state,
> };
>
> +/*
> + * Atomic Helpers
> + */
> +static const struct drm_crtc_helper_funcs vmw_ldu_crtc_helper_funcs = {
> + .prepare = vmw_ldu_crtc_helper_prepare,
> + .commit = vmw_ldu_crtc_helper_commit,
> + .disable = vmw_ldu_crtc_helper_disable,
> + .mode_set = drm_helper_crtc_mode_set,
Note this is only needed for the transitional helpers. You can/should
remove the .mode_set hook once you're fully atomic. I didn't see that
anywhere later on, might have missed it.
-Daniel
> + .mode_set_nofb = vmw_ldu_crtc_mode_set_nofb,
> + .atomic_check = vmw_du_crtc_atomic_check,
> + .atomic_begin = vmw_du_crtc_atomic_begin,
> + .atomic_flush = vmw_du_crtc_atomic_flush,
> +};
> +
>
> static int vmw_ldu_init(struct vmw_private *dev_priv, unsigned unit)
> {
> @@ -445,6 +522,8 @@ static int vmw_ldu_init(struct vmw_private *dev_priv, unsigned unit)
> goto err_free_unregister;
> }
>
> + drm_crtc_helper_add(crtc, &vmw_ldu_crtc_helper_funcs);
> +
> drm_mode_crtc_set_gamma_size(crtc, 256);
>
> drm_object_attach_property(&connector->base,
> diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_scrn.c b/drivers/gpu/drm/vmwgfx/vmwgfx_scrn.c
> index 36d42f5..662024c 100644
> --- a/drivers/gpu/drm/vmwgfx/vmwgfx_scrn.c
> +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_scrn.c
> @@ -250,6 +250,109 @@ static int vmw_sou_backing_alloc(struct vmw_private *dev_priv,
> return ret;
> }
>
> +/**
> + * vmw_sou_crtc_mode_set_nofb - Create new screen
> + *
> + * @crtc: CRTC associated with the new screen
> + *
> + * This function creates/destroys a screen. This function cannot fail, so if
> + * somehow we run into a failure, just do the best we can to get out.
> + */
> +static void vmw_sou_crtc_mode_set_nofb(struct drm_crtc *crtc)
> +{
> + struct vmw_private *dev_priv;
> + struct vmw_screen_object_unit *sou;
> + struct vmw_framebuffer *vfb;
> + struct drm_framebuffer *fb;
> + struct drm_plane_state *ps;
> + struct vmw_plane_state *vps;
> + int ret;
> +
> +
> + sou = vmw_crtc_to_sou(crtc);
> + dev_priv = vmw_priv(crtc->dev);
> + ps = crtc->primary->state;
> + fb = ps->fb;
> + vps = vmw_plane_state_to_vps(ps);
> +
> + vfb = (fb) ? vmw_framebuffer_to_vfb(fb) : NULL;
> +
> + if (sou->defined) {
> + ret = vmw_sou_fifo_destroy(dev_priv, sou);
> + if (ret) {
> + DRM_ERROR("Failed to destroy Screen Object\n");
> + return;
> + }
> + }
> +
> + if (vfb) {
> + sou->buffer = vps->dmabuf;
> + sou->buffer_size = vps->dmabuf_size;
> +
> + ret = vmw_sou_fifo_create(dev_priv, sou, crtc->x, crtc->y,
> + &crtc->mode);
> + if (ret)
> + DRM_ERROR("Failed to define Screen Object %dx%d\n",
> + crtc->x, crtc->y);
> +
> + vmw_kms_add_active(dev_priv, &sou->base, vfb);
> + } else {
> + sou->buffer = NULL;
> + sou->buffer_size = 0;
> +
> + vmw_kms_del_active(dev_priv, &sou->base);
> + }
> +}
> +
> +/**
> + * vmw_sou_crtc_helper_prepare - Noop
> + *
> + * @crtc: CRTC associated with the new screen
> + *
> + * Prepares the CRTC for a mode set, but we don't need to do anything here.
> + */
> +static void vmw_sou_crtc_helper_prepare(struct drm_crtc *crtc)
> +{
> +}
> +
> +/**
> + * vmw_sou_crtc_helper_commit - Noop
> + *
> + * @crtc: CRTC associated with the new screen
> + *
> + * This is called after a mode set has been completed.
> + */
> +static void vmw_sou_crtc_helper_commit(struct drm_crtc *crtc)
> +{
> +}
> +
> +/**
> + * vmw_sou_crtc_helper_disable - Turns off CRTC
> + *
> + * @crtc: CRTC to be turned off
> + */
> +static void vmw_sou_crtc_helper_disable(struct drm_crtc *crtc)
> +{
> + struct vmw_private *dev_priv;
> + struct vmw_screen_object_unit *sou;
> + int ret;
> +
> +
> + if (!crtc) {
> + DRM_ERROR("CRTC is NULL\n");
> + return;
> + }
> +
> + sou = vmw_crtc_to_sou(crtc);
> + dev_priv = vmw_priv(crtc->dev);
> +
> + if (sou->defined) {
> + ret = vmw_sou_fifo_destroy(dev_priv, sou);
> + if (ret)
> + DRM_ERROR("Failed to destroy Screen Object\n");
> + }
> +}
> +
> static int vmw_sou_crtc_set_config(struct drm_mode_set *set)
> {
> struct vmw_private *dev_priv;
> @@ -527,6 +630,20 @@ static const struct drm_plane_funcs vmw_sou_cursor_funcs = {
> .atomic_destroy_state = vmw_du_plane_destroy_state,
> };
>
> +/*
> + * Atomic Helpers
> + */
> +static const struct drm_crtc_helper_funcs vmw_sou_crtc_helper_funcs = {
> + .prepare = vmw_sou_crtc_helper_prepare,
> + .commit = vmw_sou_crtc_helper_commit,
> + .disable = vmw_sou_crtc_helper_disable,
> + .mode_set = drm_helper_crtc_mode_set,
> + .mode_set_nofb = vmw_sou_crtc_mode_set_nofb,
> + .atomic_check = vmw_du_crtc_atomic_check,
> + .atomic_begin = vmw_du_crtc_atomic_begin,
> + .atomic_flush = vmw_du_crtc_atomic_flush,
> +};
> +
>
> static int vmw_sou_init(struct vmw_private *dev_priv, unsigned unit)
> {
> @@ -626,6 +743,8 @@ static int vmw_sou_init(struct vmw_private *dev_priv, unsigned unit)
> goto err_free_unregister;
> }
>
> + drm_crtc_helper_add(crtc, &vmw_sou_crtc_helper_funcs);
> +
> drm_mode_crtc_set_gamma_size(crtc, 256);
>
> drm_object_attach_property(&connector->base,
> diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c b/drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c
> index b1fae49..6e3cfad 100644
> --- a/drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c
> +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c
> @@ -500,6 +500,106 @@ static int vmw_stdu_bind_fb(struct vmw_private *dev_priv,
> return ret;
> }
>
> +
> +/**
> + * vmw_stdu_crtc_mode_set_nofb - Updates screen target size
> + *
> + * @crtc: CRTC associated with the screen target
> + *
> + * This function defines/destroys a screen target
> + *
> + */
> +static void vmw_stdu_crtc_mode_set_nofb(struct drm_crtc *crtc)
> +{
> + struct vmw_private *dev_priv;
> + struct vmw_screen_target_display_unit *stdu;
> + int ret;
> +
> +
> + stdu = vmw_crtc_to_stdu(crtc);
> + dev_priv = vmw_priv(crtc->dev);
> +
> + if (stdu->defined) {
> + ret = vmw_stdu_bind_st(dev_priv, stdu, NULL);
> + if (ret)
> + DRM_ERROR("Failed to blank CRTC\n");
> +
> + (void) vmw_stdu_update_st(dev_priv, stdu);
> +
> + ret = vmw_stdu_destroy_st(dev_priv, stdu);
> + if (ret)
> + DRM_ERROR("Failed to destroy Screen Target\n");
> +
> + stdu->content_fb_type = SAME_AS_DISPLAY;
> + }
> +
> + if (!crtc->state->enable)
> + return;
> +
> + vmw_svga_enable(dev_priv);
> + ret = vmw_stdu_define_st(dev_priv, stdu, &crtc->mode, crtc->x, crtc->y);
> +
> + if (ret)
> + DRM_ERROR("Failed to define Screen Target of size %dx%d\n",
> + crtc->x, crtc->y);
> +}
> +
> +
> +static void vmw_stdu_crtc_helper_prepare(struct drm_crtc *crtc)
> +{
> +}
> +
> +
> +static void vmw_stdu_crtc_helper_commit(struct drm_crtc *crtc)
> +{
> + struct vmw_private *dev_priv;
> + struct vmw_screen_target_display_unit *stdu;
> + struct vmw_framebuffer *vfb;
> + struct drm_framebuffer *fb;
> +
> +
> + stdu = vmw_crtc_to_stdu(crtc);
> + dev_priv = vmw_priv(crtc->dev);
> + fb = crtc->primary->fb;
> +
> + vfb = (fb) ? vmw_framebuffer_to_vfb(fb) : NULL;
> +
> + if (vfb)
> + vmw_kms_add_active(dev_priv, &stdu->base, vfb);
> + else
> + vmw_kms_del_active(dev_priv, &stdu->base);
> +}
> +
> +static void vmw_stdu_crtc_helper_disable(struct drm_crtc *crtc)
> +{
> + struct vmw_private *dev_priv;
> + struct vmw_screen_target_display_unit *stdu;
> + int ret;
> +
> +
> + if (!crtc) {
> + DRM_ERROR("CRTC is NULL\n");
> + return;
> + }
> +
> + stdu = vmw_crtc_to_stdu(crtc);
> + dev_priv = vmw_priv(crtc->dev);
> +
> + if (stdu->defined) {
> + ret = vmw_stdu_bind_st(dev_priv, stdu, NULL);
> + if (ret)
> + DRM_ERROR("Failed to blank CRTC\n");
> +
> + (void) vmw_stdu_update_st(dev_priv, stdu);
> +
> + ret = vmw_stdu_destroy_st(dev_priv, stdu);
> + if (ret)
> + DRM_ERROR("Failed to destroy Screen Target\n");
> +
> + stdu->content_fb_type = SAME_AS_DISPLAY;
> + }
> +}
> +
> /**
> * vmw_stdu_crtc_set_config - Sets a mode
> *
> @@ -1113,6 +1213,21 @@ static const struct drm_plane_funcs vmw_stdu_cursor_funcs = {
> };
>
>
> +/*
> + * Atomic Helpers
> + */
> +static const struct drm_crtc_helper_funcs vmw_stdu_crtc_helper_funcs = {
> + .prepare = vmw_stdu_crtc_helper_prepare,
> + .commit = vmw_stdu_crtc_helper_commit,
> + .disable = vmw_stdu_crtc_helper_disable,
> + .mode_set = drm_helper_crtc_mode_set,
> + .mode_set_nofb = vmw_stdu_crtc_mode_set_nofb,
> + .atomic_check = vmw_du_crtc_atomic_check,
> + .atomic_begin = vmw_du_crtc_atomic_begin,
> + .atomic_flush = vmw_du_crtc_atomic_flush,
> +};
> +
> +
> /**
> * vmw_stdu_init - Sets up a Screen Target Display Unit
> *
> @@ -1219,6 +1334,8 @@ static int vmw_stdu_init(struct vmw_private *dev_priv, unsigned unit)
> goto err_free_unregister;
> }
>
> + drm_crtc_helper_add(crtc, &vmw_stdu_crtc_helper_funcs);
> +
> drm_mode_crtc_set_gamma_size(crtc, 256);
>
> drm_object_attach_property(&connector->base,
> --
> 2.7.4
>
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
More information about the dri-devel
mailing list