[PATCHv5 04/11] exynos_hdmi: add CEC notifier support
Hans Verkuil
hverkuil at xs4all.nl
Wed Mar 29 14:15:36 UTC 2017
From: Hans Verkuil <hans.verkuil at cisco.com>
Implement the CEC notifier support to allow CEC drivers to
be informed when there is a new physical address.
Signed-off-by: Hans Verkuil <hans.verkuil at cisco.com>
Tested-by: Marek Szyprowski <m.szyprowski at samsung.com>
---
drivers/gpu/drm/exynos/exynos_hdmi.c | 20 ++++++++++++++++++--
1 file changed, 18 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/exynos/exynos_hdmi.c b/drivers/gpu/drm/exynos/exynos_hdmi.c
index 88ccc0469316..2afc8b8052c2 100644
--- a/drivers/gpu/drm/exynos/exynos_hdmi.c
+++ b/drivers/gpu/drm/exynos/exynos_hdmi.c
@@ -43,6 +43,8 @@
#include <drm/exynos_drm.h>
+#include <media/cec-notifier.h>
+
#include "exynos_drm_drv.h"
#include "exynos_drm_crtc.h"
@@ -119,6 +121,7 @@ struct hdmi_context {
bool dvi_mode;
struct delayed_work hotplug_work;
struct drm_display_mode current_mode;
+ struct cec_notifier *notifier;
const struct hdmi_driver_data *drv_data;
void __iomem *regs;
@@ -822,6 +825,7 @@ static enum drm_connector_status hdmi_detect(struct drm_connector *connector,
if (gpiod_get_value(hdata->hpd_gpio))
return connector_status_connected;
+ cec_notifier_set_phys_addr(hdata->notifier, CEC_PHYS_ADDR_INVALID);
return connector_status_disconnected;
}
@@ -860,6 +864,8 @@ static int hdmi_get_modes(struct drm_connector *connector)
edid->width_cm, edid->height_cm);
drm_mode_connector_update_edid_property(connector, edid);
+ cec_notifier_set_phys_addr(hdata->notifier,
+ cec_get_edid_phys_addr(edid));
ret = drm_add_edid_modes(connector, edid);
@@ -1503,6 +1509,7 @@ static void hdmi_disable(struct drm_encoder *encoder)
if (funcs && funcs->disable)
(*funcs->disable)(crtc);
+ cec_notifier_set_phys_addr(hdata->notifier, CEC_PHYS_ADDR_INVALID);
cancel_delayed_work(&hdata->hotplug_work);
hdmiphy_disable(hdata);
@@ -1878,15 +1885,22 @@ static int hdmi_probe(struct platform_device *pdev)
}
}
+ hdata->notifier = cec_notifier_get(&pdev->dev);
+ if (hdata->notifier == NULL) {
+ ret = -ENOMEM;
+ goto err_hdmiphy;
+ }
+
pm_runtime_enable(dev);
ret = component_add(&pdev->dev, &hdmi_component_ops);
if (ret)
- goto err_disable_pm_runtime;
+ goto err_notifier_put;
return ret;
-err_disable_pm_runtime:
+err_notifier_put:
+ cec_notifier_put(hdata->notifier);
pm_runtime_disable(dev);
err_hdmiphy:
@@ -1905,9 +1919,11 @@ static int hdmi_remove(struct platform_device *pdev)
struct hdmi_context *hdata = platform_get_drvdata(pdev);
cancel_delayed_work_sync(&hdata->hotplug_work);
+ cec_notifier_set_phys_addr(hdata->notifier, CEC_PHYS_ADDR_INVALID);
component_del(&pdev->dev, &hdmi_component_ops);
+ cec_notifier_put(hdata->notifier);
pm_runtime_disable(&pdev->dev);
if (!IS_ERR(hdata->reg_hdmi_en))
--
2.11.0
More information about the dri-devel
mailing list