[PATCHv5 11/11] arm: sti: update sti-cec for CEC notifier support

[Benjamin Gaignard]

+ Patrice for sti DT

2017-03-29 16:15 GMT+02:00 Hans Verkuil <hverkuil at xs4all.nl>:
> From: Benjamin Gaignard <benjamin.gaignard at linaro.org>
>
> To use CEC notifier sti CEC driver needs to get phandle
> of the hdmi device.
>
> Signed-off-by: Benjamin Gaignard <benjamin.gaignard at linaro.org>
> Signed-off-by: Hans Verkuil <hans.verkuil at cisco.com>
> CC: devicetree at vger.kernel.org
> ---
>  arch/arm/boot/dts/stih407-family.dtsi | 12 ------------
>  arch/arm/boot/dts/stih410.dtsi        | 13 +++++++++++++
>  2 files changed, 13 insertions(+), 12 deletions(-)
>
> diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi
> index d753ac36788f..044184580326 100644
> --- a/arch/arm/boot/dts/stih407-family.dtsi
> +++ b/arch/arm/boot/dts/stih407-family.dtsi
> @@ -742,18 +742,6 @@
>                                  <&clk_s_c0_flexgen CLK_ETH_PHY>;
>                 };
>
> -               cec: sti-cec at 094a087c {
> -                       compatible = "st,stih-cec";
> -                       reg = <0x94a087c 0x64>;
> -                       clocks = <&clk_sysin>;
> -                       clock-names = "cec-clk";
> -                       interrupts = <GIC_SPI 140 IRQ_TYPE_NONE>;
> -                       interrupt-names = "cec-irq";
> -                       pinctrl-names = "default";
> -                       pinctrl-0 = <&pinctrl_cec0_default>;
> -                       resets = <&softreset STIH407_LPM_SOFTRESET>;
> -               };
> -
>                 rng10: rng at 08a89000 {
>                         compatible      = "st,rng";
>                         reg             = <0x08a89000 0x1000>;
> diff --git a/arch/arm/boot/dts/stih410.dtsi b/arch/arm/boot/dts/stih410.dtsi
> index 3c9672c5b09f..21fe72b183d8 100644
> --- a/arch/arm/boot/dts/stih410.dtsi
> +++ b/arch/arm/boot/dts/stih410.dtsi
> @@ -281,5 +281,18 @@
>                                  <&clk_s_c0_flexgen CLK_ST231_DMU>,
>                                  <&clk_s_c0_flexgen CLK_FLASH_PROMIP>;
>                 };
> +
> +               sti-cec at 094a087c {
> +                       compatible = "st,stih-cec";
> +                       reg = <0x94a087c 0x64>;
> +                       clocks = <&clk_sysin>;
> +                       clock-names = "cec-clk";
> +                       interrupts = <GIC_SPI 140 IRQ_TYPE_NONE>;
> +                       interrupt-names = "cec-irq";
> +                       pinctrl-names = "default";
> +                       pinctrl-0 = <&pinctrl_cec0_default>;
> +                       resets = <&softreset STIH407_LPM_SOFTRESET>;
> +                       hdmi-phandle = <&sti_hdmi>;
> +               };
>         };
>  };
> --
> 2.11.0
>



-- 
Benjamin Gaignard

Graphic Study Group

Linaro.org │ Open source software for ARM SoCs

Follow Linaro: Facebook | Twitter | Blog