[PATCHv5 11/11] arm: sti: update sti-cec for CEC notifier support

[Hans Verkuil]

On 03/30/2017 11:30 AM, Patrice CHOTARD wrote:
> Hi Benjamin
> 
> On 03/30/2017 09:41 AM, Benjamin Gaignard wrote:
>> + Patrice for sti DT
> 
> In order to be coherent with all previous STi DT patches,
> 
> can you update the commit message with "ARM: dts: STiH410: update 
> sti-cec for CEC notifier support"

Done.

Regards,

	Hans

> 
> Thanks
> 
> Patrice
> 
>>
>> 2017-03-29 16:15 GMT+02:00 Hans Verkuil <hverkuil at xs4all.nl>:
>>> From: Benjamin Gaignard <benjamin.gaignard at linaro.org>
>>>
>>> To use CEC notifier sti CEC driver needs to get phandle
>>> of the hdmi device.
>>>
>>> Signed-off-by: Benjamin Gaignard <benjamin.gaignard at linaro.org>
>>> Signed-off-by: Hans Verkuil <hans.verkuil at cisco.com>
>>> CC: devicetree at vger.kernel.org
>>> ---
>>>  arch/arm/boot/dts/stih407-family.dtsi | 12 ------------
>>>  arch/arm/boot/dts/stih410.dtsi        | 13 +++++++++++++
>>>  2 files changed, 13 insertions(+), 12 deletions(-)
>>>
>>> diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi
>>> index d753ac36788f..044184580326 100644
>>> --- a/arch/arm/boot/dts/stih407-family.dtsi
>>> +++ b/arch/arm/boot/dts/stih407-family.dtsi
>>> @@ -742,18 +742,6 @@
>>>                                  <&clk_s_c0_flexgen CLK_ETH_PHY>;
>>>                 };
>>>
>>> -               cec: sti-cec at 094a087c {
>>> -                       compatible = "st,stih-cec";
>>> -                       reg = <0x94a087c 0x64>;
>>> -                       clocks = <&clk_sysin>;
>>> -                       clock-names = "cec-clk";
>>> -                       interrupts = <GIC_SPI 140 IRQ_TYPE_NONE>;
>>> -                       interrupt-names = "cec-irq";
>>> -                       pinctrl-names = "default";
>>> -                       pinctrl-0 = <&pinctrl_cec0_default>;
>>> -                       resets = <&softreset STIH407_LPM_SOFTRESET>;
>>> -               };
>>> -
>>>                 rng10: rng at 08a89000 {
>>>                         compatible      = "st,rng";
>>>                         reg             = <0x08a89000 0x1000>;
>>> diff --git a/arch/arm/boot/dts/stih410.dtsi b/arch/arm/boot/dts/stih410.dtsi
>>> index 3c9672c5b09f..21fe72b183d8 100644
>>> --- a/arch/arm/boot/dts/stih410.dtsi
>>> +++ b/arch/arm/boot/dts/stih410.dtsi
>>> @@ -281,5 +281,18 @@
>>>                                  <&clk_s_c0_flexgen CLK_ST231_DMU>,
>>>                                  <&clk_s_c0_flexgen CLK_FLASH_PROMIP>;
>>>                 };
>>> +
>>> +               sti-cec at 094a087c {
>>> +                       compatible = "st,stih-cec";
>>> +                       reg = <0x94a087c 0x64>;
>>> +                       clocks = <&clk_sysin>;
>>> +                       clock-names = "cec-clk";
>>> +                       interrupts = <GIC_SPI 140 IRQ_TYPE_NONE>;
>>> +                       interrupt-names = "cec-irq";
>>> +                       pinctrl-names = "default";
>>> +                       pinctrl-0 = <&pinctrl_cec0_default>;
>>> +                       resets = <&softreset STIH407_LPM_SOFTRESET>;
>>> +                       hdmi-phandle = <&sti_hdmi>;
>>> +               };
>>>         };
>>>  };
>>> --
>>> 2.11.0
>>>
>>
>>
>>
>