[PATCH v2 5/8] drm: Use new mode_valid() helpers in connector probe helper

[Jose Abreu]

This changes the connector probe helper function to use the new
encoder->mode_valid() and crtc->mode_valid() helper callbacks to
validate the modes.

The new callbacks are optional so the behaviour remains the same
if they are not implemented. If they are, then the code loops
through all the connector's encodersXcrtcs and calls the
callback.

If at least a valid encoderXcrtc combination is found which
accepts the mode then the function returns MODE_OK.

Signed-off-by: Jose Abreu <joabreu at synopsys.com>
Cc: Carlos Palminha <palminha at synopsys.com>
Cc: Alexey Brodkin <abrodkin at synopsys.com>
Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
Cc: Daniel Vetter <daniel.vetter at ffwll.ch>
Cc: Dave Airlie <airlied at linux.ie>
Cc: Andrzej Hajda <a.hajda at samsung.com>
Cc: Archit Taneja <architt at codeaurora.org>
---

Changes v1->v2:
	- Use new helpers suggested by Ville
	- Change documentation (Daniel)

 drivers/gpu/drm/drm_probe_helper.c | 60 ++++++++++++++++++++++++++++++++++++--
 1 file changed, 57 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/drm_probe_helper.c b/drivers/gpu/drm/drm_probe_helper.c
index 1b0c14a..de47413 100644
--- a/drivers/gpu/drm/drm_probe_helper.c
+++ b/drivers/gpu/drm/drm_probe_helper.c
@@ -39,6 +39,8 @@
 #include <drm/drm_fb_helper.h>
 #include <drm/drm_edid.h>
 
+#include "drm_crtc_internal.h"
+
 /**
  * DOC: output probing helper overview
  *
@@ -80,6 +82,54 @@
 	return MODE_OK;
 }
 
+static enum drm_mode_status
+drm_mode_validate_connector(struct drm_connector *connector,
+			    struct drm_display_mode *mode)
+{
+	struct drm_device *dev = connector->dev;
+	uint32_t *ids = connector->encoder_ids;
+	enum drm_mode_status ret = MODE_OK;
+	unsigned int i;
+
+	/* Step 1: Validate against connector */
+	ret = drm_connector_mode_valid(connector, mode);
+	if (ret != MODE_OK)
+		return ret;
+
+	/* Step 2: Validate against encoders and crtcs */
+	for (i = 0; i < DRM_CONNECTOR_MAX_ENCODER; i++) {
+		struct drm_encoder *encoder = drm_encoder_find(dev, ids[i]);
+		struct drm_crtc *crtc;
+
+		if (!encoder)
+			continue;
+
+		ret = drm_encoder_mode_valid(encoder, mode);
+		if (ret != MODE_OK) {
+			/* No point in continuing for crtc check as this encoder
+			 * will not accept the mode anyway. If all encoders
+			 * reject the mode then, at exit, ret will not be
+			 * MODE_OK. */
+			continue;
+		}
+
+		drm_for_each_crtc(crtc, dev) {
+			if (!drm_encoder_crtc_ok(encoder, crtc))
+				continue;
+
+			ret = drm_crtc_mode_valid(crtc, mode);
+			if (ret == MODE_OK) {
+				/* If we get to this point there is at least
+				 * one combination of encoder+crtc that works
+				 * for this mode. Lets return now. */
+				return ret;
+			}
+		}
+	}
+
+	return ret;
+}
+
 static int drm_helper_probe_add_cmdline_mode(struct drm_connector *connector)
 {
 	struct drm_cmdline_mode *cmdline_mode;
@@ -284,7 +334,11 @@ void drm_kms_helper_poll_enable(struct drm_device *dev)
  *    - drm_mode_validate_flag() checks the modes against basic connector
  *      capabilities (interlace_allowed,doublescan_allowed,stereo_allowed)
  *    - the optional &drm_connector_helper_funcs.mode_valid helper can perform
- *      driver and/or hardware specific checks
+ *      driver and/or sink specific checks
+ *    - the optional &drm_crtc_helper_funcs.mode_valid and
+ *      &drm_encoder_helper_funcs.mode_valid helpers can perform driver and/or
+ *      source specific checks which are also enforced by the modeset/atomic
+ *      helpers
  *
  * 5. Any mode whose status is not OK is pruned from the connector's modes list,
  *    accompanied by a debug message indicating the reason for the mode's
@@ -428,8 +482,8 @@ int drm_helper_probe_single_connector_modes(struct drm_connector *connector,
 		if (mode->status == MODE_OK)
 			mode->status = drm_mode_validate_flag(mode, mode_flags);
 
-		if (mode->status == MODE_OK && connector_funcs->mode_valid)
-			mode->status = connector_funcs->mode_valid(connector,
+		if (mode->status == MODE_OK)
+			mode->status = drm_mode_validate_connector(connector,
 								   mode);
 	}
 
-- 
1.9.1