[PATCH] gpu: drm: gma500: remove dead code

[Daniel Vetter]

On Tue, May 09, 2017 at 10:22:21AM -0500, Gustavo A. R. Silva wrote:
> Local variable use_gct is assigned to a constant value and it is never
> updated again. Remove this variable and the dead code it guards.
> 
> Addresses-Coverity-ID: 145690
> Signed-off-by: Gustavo A. R. Silva <garsilva at embeddedor.com>

Looks reasonable, applied to drm-misc for 4.13.

Thanks, Daniel

> ---
>  drivers/gpu/drm/gma500/mdfld_tpo_vid.c | 51 ++++++----------------------------
>  1 file changed, 9 insertions(+), 42 deletions(-)
> 
> diff --git a/drivers/gpu/drm/gma500/mdfld_tpo_vid.c b/drivers/gpu/drm/gma500/mdfld_tpo_vid.c
> index d8d4170..d40628e 100644
> --- a/drivers/gpu/drm/gma500/mdfld_tpo_vid.c
> +++ b/drivers/gpu/drm/gma500/mdfld_tpo_vid.c
> @@ -32,53 +32,20 @@ static struct drm_display_mode *tpo_vid_get_config_mode(struct drm_device *dev)
>  	struct drm_display_mode *mode;
>  	struct drm_psb_private *dev_priv = dev->dev_private;
>  	struct oaktrail_timing_info *ti = &dev_priv->gct_data.DTD;
> -	bool use_gct = false;
>  
>  	mode = kzalloc(sizeof(*mode), GFP_KERNEL);
>  	if (!mode)
>  		return NULL;
>  
> -	if (use_gct) {
> -		mode->hdisplay = (ti->hactive_hi << 8) | ti->hactive_lo;
> -		mode->vdisplay = (ti->vactive_hi << 8) | ti->vactive_lo;
> -		mode->hsync_start = mode->hdisplay +
> -				((ti->hsync_offset_hi << 8) |
> -				ti->hsync_offset_lo);
> -		mode->hsync_end = mode->hsync_start +
> -				((ti->hsync_pulse_width_hi << 8) |
> -				ti->hsync_pulse_width_lo);
> -		mode->htotal = mode->hdisplay + ((ti->hblank_hi << 8) |
> -								ti->hblank_lo);
> -		mode->vsync_start =
> -			mode->vdisplay + ((ti->vsync_offset_hi << 8) |
> -						ti->vsync_offset_lo);
> -		mode->vsync_end =
> -			mode->vsync_start + ((ti->vsync_pulse_width_hi << 8) |
> -						ti->vsync_pulse_width_lo);
> -		mode->vtotal = mode->vdisplay +
> -				((ti->vblank_hi << 8) | ti->vblank_lo);
> -		mode->clock = ti->pixel_clock * 10;
> -
> -		dev_dbg(dev->dev, "hdisplay is %d\n", mode->hdisplay);
> -		dev_dbg(dev->dev, "vdisplay is %d\n", mode->vdisplay);
> -		dev_dbg(dev->dev, "HSS is %d\n", mode->hsync_start);
> -		dev_dbg(dev->dev, "HSE is %d\n", mode->hsync_end);
> -		dev_dbg(dev->dev, "htotal is %d\n", mode->htotal);
> -		dev_dbg(dev->dev, "VSS is %d\n", mode->vsync_start);
> -		dev_dbg(dev->dev, "VSE is %d\n", mode->vsync_end);
> -		dev_dbg(dev->dev, "vtotal is %d\n", mode->vtotal);
> -		dev_dbg(dev->dev, "clock is %d\n", mode->clock);
> -	} else {
> -		mode->hdisplay = 864;
> -		mode->vdisplay = 480;
> -		mode->hsync_start = 873;
> -		mode->hsync_end = 876;
> -		mode->htotal = 887;
> -		mode->vsync_start = 487;
> -		mode->vsync_end = 490;
> -		mode->vtotal = 499;
> -		mode->clock = 33264;
> -	}
> +	mode->hdisplay = 864;
> +	mode->vdisplay = 480;
> +	mode->hsync_start = 873;
> +	mode->hsync_end = 876;
> +	mode->htotal = 887;
> +	mode->vsync_start = 487;
> +	mode->vsync_end = 490;
> +	mode->vtotal = 499;
> +	mode->clock = 33264;
>  
>  	drm_mode_set_name(mode);
>  	drm_mode_set_crtcinfo(mode, 0);
> -- 
> 2.5.0
> 
> _______________________________________________
> dri-devel mailing list
> dri-devel at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel

-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch