[Intel-gfx] [PATCH v6 4/9] drm/i915: Allow choosing how to adjust brightness if both supported

Pandiyan, Dhinakaran dhinakaran.pandiyan at intel.com
Thu May 11 00:50:20 UTC 2017


On Tue, 2017-05-09 at 16:40 -0700, Puthikorn Voravootivat wrote:
> Add option to allow choosing how to adjust brightness if
> panel supports both PWM pin and AUX channel.
> 
> Signed-off-by: Puthikorn Voravootivat <puthik at chromium.org>
> ---
>  drivers/gpu/drm/i915/i915_params.c            |  8 +++++---
>  drivers/gpu/drm/i915/i915_params.h            |  2 +-
>  drivers/gpu/drm/i915/intel_dp_aux_backlight.c | 23 ++++++++++++++++++-----
>  3 files changed, 24 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/i915_params.c b/drivers/gpu/drm/i915/i915_params.c
> index b6a7e363d076..13cf3f1572ab 100644
> --- a/drivers/gpu/drm/i915/i915_params.c
> +++ b/drivers/gpu/drm/i915/i915_params.c
> @@ -63,7 +63,7 @@ struct i915_params i915 __read_mostly = {
>  	.huc_firmware_path = NULL,
>  	.enable_dp_mst = true,
>  	.inject_load_failure = 0,
> -	.enable_dpcd_backlight = false,
> +	.enable_dpcd_backlight = -1,
>  	.enable_gvt = false,
>  };
>  
> @@ -246,9 +246,11 @@ MODULE_PARM_DESC(enable_dp_mst,
>  module_param_named_unsafe(inject_load_failure, i915.inject_load_failure, uint, 0400);
>  MODULE_PARM_DESC(inject_load_failure,
>  	"Force an error after a number of failure check points (0:disabled (default), N:force failure at the Nth failure check point)");
> -module_param_named(enable_dpcd_backlight, i915.enable_dpcd_backlight, bool, 0600);
> +module_param_named(enable_dpcd_backlight, i915.enable_dpcd_backlight, int, 0600);
>  MODULE_PARM_DESC(enable_dpcd_backlight,
> -	"Enable support for DPCD backlight control (default:false)");
> +	"Enable support for DPCD backlight control "
> +	"(-1:disable (default), 0:Use PWM pin if both supported, "
> +	"1:Use DPCD if both supported");
>  
>  module_param_named(enable_gvt, i915.enable_gvt, bool, 0400);
>  MODULE_PARM_DESC(enable_gvt,
> diff --git a/drivers/gpu/drm/i915/i915_params.h b/drivers/gpu/drm/i915/i915_params.h
> index 34148cc8637c..ac02efce6e22 100644
> --- a/drivers/gpu/drm/i915/i915_params.h
> +++ b/drivers/gpu/drm/i915/i915_params.h
> @@ -66,7 +66,7 @@
>  	func(bool, verbose_state_checks); \
>  	func(bool, nuclear_pageflip); \
>  	func(bool, enable_dp_mst); \
> -	func(bool, enable_dpcd_backlight); \
> +	func(int, enable_dpcd_backlight); \
>  	func(bool, enable_gvt)
>  
>  #define MEMBER(T, member) T member
> diff --git a/drivers/gpu/drm/i915/intel_dp_aux_backlight.c b/drivers/gpu/drm/i915/intel_dp_aux_backlight.c
> index c22712762957..e82f7cb9a7af 100644
> --- a/drivers/gpu/drm/i915/intel_dp_aux_backlight.c
> +++ b/drivers/gpu/drm/i915/intel_dp_aux_backlight.c
> @@ -167,21 +167,34 @@ intel_dp_aux_display_control_capable(struct intel_connector *connector)
>  	/* Check the  eDP Display control capabilities registers to determine if
>  	 * the panel can support backlight control over the aux channel
>  	 */
> -	if (intel_dp->edp_dpcd[1] & DP_EDP_TCON_BACKLIGHT_ADJUSTMENT_CAP &&
> -	    (intel_dp->edp_dpcd[2] & DP_EDP_BACKLIGHT_BRIGHTNESS_AUX_SET_CAP) &&
> -	    !((intel_dp->edp_dpcd[1] & DP_EDP_BACKLIGHT_PIN_ENABLE_CAP) ||
> -	      (intel_dp->edp_dpcd[2] & DP_EDP_BACKLIGHT_BRIGHTNESS_PWM_PIN_CAP))) {
> +	if ((intel_dp->edp_dpcd[1] & DP_EDP_TCON_BACKLIGHT_ADJUSTMENT_CAP) &&
> +	    (intel_dp->edp_dpcd[2] & DP_EDP_BACKLIGHT_BRIGHTNESS_AUX_SET_CAP)) {
>  		DRM_DEBUG_KMS("AUX Backlight Control Supported!\n");
>  		return true;
>  	}
>  	return false;
>  }
>  
> +static bool
> +intel_dp_pwm_pin_display_control_capable(struct intel_connector *connector)
> +{
> +	struct intel_dp *intel_dp = enc_to_intel_dp(&connector->encoder->base);
> +
> +	/* Check the  eDP Display control capabilities registers to determine if
> +	 * the panel can support backlight control via BL_PWM_DIM eDP pin
> +	 */
> +	return intel_dp->edp_dpcd[2] & DP_EDP_BACKLIGHT_BRIGHTNESS_PWM_PIN_CAP;


This is not right. The bits in DPCD 0x702 don't mean anything if
DP_EDP_TCON_BACKLIGHT_ADJUSTMENT_CAP in 0x701 is not set.


-DK


> +}
> +
>  int intel_dp_aux_init_backlight_funcs(struct intel_connector *intel_connector)
>  {
>  	struct intel_panel *panel = &intel_connector->panel;
>  
> -	if (!i915.enable_dpcd_backlight)
> +	if (i915.enable_dpcd_backlight == -1)
> +		return -ENODEV;
> +
> +	if (i915.enable_dpcd_backlight == 0 &&
> +	    intel_dp_pwm_pin_display_control_capable(intel_connector))
>  		return -ENODEV;
>  
>  	if (!intel_dp_aux_display_control_capable(intel_connector))



More information about the dri-devel mailing list