[RFC PATCH 10/11] ARM: sun8i: h3: add display engine pipeline for TVE
Maxime Ripard
maxime.ripard at free-electrons.com
Fri May 19 18:06:16 UTC 2017
On Thu, May 18, 2017 at 12:43:53AM +0800, Icenowy Zheng wrote:
> As we have already the support for the TV encoder on Allwinner H3, add
> the display engine pipeline device tree nodes to its DTSI file.
>
> The H5 pipeline has some differences and will be enabled later.
>
> The currently-unused mixer0 and tcon0 are also needed, for the
> completement of the pipeline.
>
> Signed-off-by: Icenowy Zheng <icenowy at aosc.io>
> ---
> arch/arm/boot/dts/sun8i-h3.dtsi | 189 ++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 189 insertions(+)
>
> diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
> index b36f9f423c39..20172ef92415 100644
> --- a/arch/arm/boot/dts/sun8i-h3.dtsi
> +++ b/arch/arm/boot/dts/sun8i-h3.dtsi
> @@ -41,6 +41,8 @@
> */
>
> #include "sunxi-h3-h5.dtsi"
> +#include <dt-bindings/clock/sun8i-de2.h>
> +#include <dt-bindings/reset/sun8i-de2.h>
>
> / {
> cpus {
> @@ -72,6 +74,193 @@
> };
> };
>
> + de: display-engine {
> + compatible = "allwinner,sun8i-h3-display-engine";
> + allwinner,pipelines = <&mixer0>,
> + <&mixer1>;
> + status = "disabled";
> + };
> +
> + soc {
> + display_clocks: clock at 1000000 {
> + compatible = "allwinner,sun8i-a83t-de2-clk";
> + reg = <0x01000000 0x100000>;
> + clocks = <&ccu CLK_BUS_DE>,
> + <&ccu CLK_DE>;
> + clock-names = "bus",
> + "mod";
> + resets = <&ccu RST_BUS_DE>;
> + #clock-cells = <1>;
> + #reset-cells = <1>;
> + assigned-clocks = <&ccu CLK_DE>;
> + assigned-clock-parents = <&ccu CLK_PLL_DE>;
> + assigned-clock-rates = <432000000>;
This shouldn't be set in the DT, but evaluated at runtime when calling
clk_set_rate.
> + tve0: tv-encoder at 1e00000 {
> + compatible = "allwinner,sun8i-h3-tv-encoder";
> + reg = <0x01e00000 0x1000>;
> + clocks = <&ccu CLK_BUS_TVE>, <&ccu CLK_TVE>;
> + clock-names = "bus", "mod";
> + resets = <&ccu RST_BUS_TVE>;
> + status = "disabled";
> +
> + assigned-clocks = <&ccu CLK_TVE>;
> + assigned-clock-parents = <&ccu CLK_PLL_DE>;
Same thing here. clk_set_rate should just do the right thing.
> + assigned-clock-rates = <216000000>;
And why are you setting it in the driver and in the DT?
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 801 bytes
Desc: not available
URL: <https://lists.freedesktop.org/archives/dri-devel/attachments/20170519/c57dec29/attachment.sig>
More information about the dri-devel
mailing list