[PATCH v4 03/10] drm: Use new mode_valid() helpers in connector probe helper

[Daniel Vetter]

On Fri, May 19, 2017 at 01:52:12AM +0100, Jose Abreu wrote:
> This changes the connector probe helper function to use the new
> encoder->mode_valid(), bridge->mode_valid() and crtc->mode_valid()
> helper callbacks to validate the modes.
> 
> The new callbacks are optional so the behaviour remains the same
> if they are not implemented. If they are, then the code loops
> through all the connector's encodersXbridgesXcrtcs and calls the
> callback.
> 
> If at least a valid encoderXbridgeXcrtc combination is found which
> accepts the mode then the function returns MODE_OK.
> 
> Signed-off-by: Jose Abreu <joabreu at synopsys.com>
> Cc: Carlos Palminha <palminha at synopsys.com>
> Cc: Alexey Brodkin <abrodkin at synopsys.com>
> Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
> Cc: Daniel Vetter <daniel.vetter at ffwll.ch>
> Cc: Dave Airlie <airlied at linux.ie>
> Cc: Andrzej Hajda <a.hajda at samsung.com>
> Cc: Archit Taneja <architt at codeaurora.org>
> Cc: Laurent Pinchart <laurent.pinchart at ideasonboard.com>

You've lost the per-patch changelog here, which is pretty easy to
accidentally do if you keep it below the ---. That's one of the reasons
why in drm we prefer the per-patch changelog to be part of the commit
itself.

Anyway I have no opinion on the bikshed discussion itself (it's a static
inline helper ffs, it doesn't really matter), and that bikeshed is the
last open I could distill from the previous submissions:

Reviewed-by: Daniel Vetter <daniel.vetter at ffwll.ch>


> ---
>  drivers/gpu/drm/drm_probe_helper.c | 67 +++++++++++++++++++++++++++++++++++---
>  1 file changed, 63 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/gpu/drm/drm_probe_helper.c b/drivers/gpu/drm/drm_probe_helper.c
> index f01abdc..00e6832 100644
> --- a/drivers/gpu/drm/drm_probe_helper.c
> +++ b/drivers/gpu/drm/drm_probe_helper.c
> @@ -83,6 +83,61 @@
>  	return MODE_OK;
>  }
>  
> +static enum drm_mode_status
> +drm_mode_validate_pipeline(struct drm_display_mode *mode,
> +			    struct drm_connector *connector)
> +{
> +	struct drm_device *dev = connector->dev;
> +	uint32_t *ids = connector->encoder_ids;
> +	enum drm_mode_status ret = MODE_OK;
> +	unsigned int i;
> +
> +	/* Step 1: Validate against connector */
> +	ret = drm_connector_mode_valid(connector, mode);
> +	if (ret != MODE_OK)
> +		return ret;
> +
> +	/* Step 2: Validate against encoders and crtcs */
> +	for (i = 0; i < DRM_CONNECTOR_MAX_ENCODER; i++) {
> +		struct drm_encoder *encoder = drm_encoder_find(dev, ids[i]);
> +		struct drm_crtc *crtc;
> +
> +		if (!encoder)
> +			continue;
> +
> +		ret = drm_encoder_mode_valid(encoder, mode);
> +		if (ret != MODE_OK) {
> +			/* No point in continuing for crtc check as this encoder
> +			 * will not accept the mode anyway. If all encoders
> +			 * reject the mode then, at exit, ret will not be
> +			 * MODE_OK. */
> +			continue;
> +		}
> +
> +		ret = drm_bridge_mode_valid(encoder->bridge, mode);
> +		if (ret != MODE_OK) {
> +			/* There is also no point in continuing for crtc check
> +			 * here. */
> +			continue;
> +		}
> +
> +		drm_for_each_crtc(crtc, dev) {
> +			if (!drm_encoder_crtc_ok(encoder, crtc))
> +				continue;
> +
> +			ret = drm_crtc_mode_valid(crtc, mode);
> +			if (ret == MODE_OK) {
> +				/* If we get to this point there is at least
> +				 * one combination of encoder+crtc that works
> +				 * for this mode. Lets return now. */
> +				return ret;
> +			}
> +		}
> +	}
> +
> +	return ret;
> +}
> +
>  static int drm_helper_probe_add_cmdline_mode(struct drm_connector *connector)
>  {
>  	struct drm_cmdline_mode *cmdline_mode;
> @@ -322,7 +377,11 @@ void drm_kms_helper_poll_enable(struct drm_device *dev)
>   *    - drm_mode_validate_flag() checks the modes against basic connector
>   *      capabilities (interlace_allowed,doublescan_allowed,stereo_allowed)
>   *    - the optional &drm_connector_helper_funcs.mode_valid helper can perform
> - *      driver and/or hardware specific checks
> + *      driver and/or sink specific checks
> + *    - the optional &drm_crtc_helper_funcs.mode_valid,
> + *      &drm_bridge_funcs.mode_valid and &drm_encoder_helper_funcs.mode_valid
> + *      helpers can perform driver and/or source specific checks which are also
> + *      enforced by the modeset/atomic helpers
>   *
>   * 5. Any mode whose status is not OK is pruned from the connector's modes list,
>   *    accompanied by a debug message indicating the reason for the mode's
> @@ -466,9 +525,9 @@ int drm_helper_probe_single_connector_modes(struct drm_connector *connector,
>  		if (mode->status == MODE_OK)
>  			mode->status = drm_mode_validate_flag(mode, mode_flags);
>  
> -		if (mode->status == MODE_OK && connector_funcs->mode_valid)
> -			mode->status = connector_funcs->mode_valid(connector,
> -								   mode);
> +		if (mode->status == MODE_OK)
> +			mode->status = drm_mode_validate_pipeline(mode,
> +								  connector);
>  	}
>  
>  prune:
> -- 
> 1.9.1
> 
> 

-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch