[PATCH 4/6] drm/fsl-dcu: Use drm_mode_config_helper_suspend/resume()

Noralf Trønnes noralf at tronnes.org
Fri Nov 3 08:49:31 UTC 2017


Den 02.11.2017 21.09, skrev Noralf Trønnes:
> These helpers take care of output polling, fbdev and atomic state.
>
> Cc: Stefan Agner <stefan at agner.ch>
> Cc: Alison Wang <alison.wang at freescale.com>
> Signed-off-by: Noralf Trønnes <noralf at tronnes.org>
> ---
>   drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c | 23 +++++------------------
>   drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h |  1 -
>   2 files changed, 5 insertions(+), 19 deletions(-)
>
> diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c
> index 58e9e0601a61..0738d9c6f1aa 100644
> --- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c
> +++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c
> @@ -27,6 +27,7 @@
>   #include <drm/drm_crtc_helper.h>
>   #include <drm/drm_fb_cma_helper.h>
>   #include <drm/drm_gem_cma_helper.h>
> +#include <drm/drm_modeset_helper.h>
>   
>   #include "fsl_dcu_drm_crtc.h"
>   #include "fsl_dcu_drm_drv.h"
> @@ -193,21 +194,11 @@ static int fsl_dcu_drm_pm_suspend(struct device *dev)
>   		return 0;
>   

Somehow I missed that ret wasn't declared here.

     int ret;

Will fix in the next version.

Noralf.

>   	disable_irq(fsl_dev->irq);
> -	drm_kms_helper_poll_disable(fsl_dev->drm);
>   
> -	console_lock();
> -	drm_fbdev_cma_set_suspend(fsl_dev->fbdev, 1);
> -	console_unlock();
> -
> -	fsl_dev->state = drm_atomic_helper_suspend(fsl_dev->drm);
> -	if (IS_ERR(fsl_dev->state)) {
> -		console_lock();
> -		drm_fbdev_cma_set_suspend(fsl_dev->fbdev, 0);
> -		console_unlock();
> -
> -		drm_kms_helper_poll_enable(fsl_dev->drm);
> +	ret = drm_mode_config_helper_suspend(fsl_dev->drm);
> +	if (ret) {
>   		enable_irq(fsl_dev->irq);
> -		return PTR_ERR(fsl_dev->state);
> +		return ret;
>   	}
>   
>   	clk_disable_unprepare(fsl_dev->pix_clk);
> @@ -233,13 +224,9 @@ static int fsl_dcu_drm_pm_resume(struct device *dev)
>   	if (fsl_dev->tcon)
>   		fsl_tcon_bypass_enable(fsl_dev->tcon);
>   	fsl_dcu_drm_init_planes(fsl_dev->drm);
> -	drm_atomic_helper_resume(fsl_dev->drm, fsl_dev->state);
>   
> -	console_lock();
> -	drm_fbdev_cma_set_suspend(fsl_dev->fbdev, 0);
> -	console_unlock();
> +	drm_mode_config_helper_resume(fsl_dev->drm);
>   
> -	drm_kms_helper_poll_enable(fsl_dev->drm);
>   	enable_irq(fsl_dev->irq);
>   
>   	return 0;
> diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h
> index da9bfd432ca6..93bfb98012d4 100644
> --- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h
> +++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h
> @@ -196,7 +196,6 @@ struct fsl_dcu_drm_device {
>   	struct drm_encoder encoder;
>   	struct fsl_dcu_drm_connector connector;
>   	const struct fsl_dcu_soc_data *soc;
> -	struct drm_atomic_state *state;
>   };
>   
>   int fsl_dcu_drm_modeset_init(struct fsl_dcu_drm_device *fsl_dev);



More information about the dri-devel mailing list