[PATCH v2 1/7] drm/bridge: tc358767: do no fail on hi-res displays

[Andrzej Hajda]

On 03.11.2017 18:01, Andrey Gusakov wrote:
> Do not fail data rates higher than 2.7 and more than 2 lanes.
> Try to fall back to 2.7Gbps and 2 lanes.
> ---
>  drivers/gpu/drm/bridge/tc358767.c |   14 +++++++++-----
>  1 file changed, 9 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/gpu/drm/bridge/tc358767.c b/drivers/gpu/drm/bridge/tc358767.c
> index 8571cfd..d52cd41 100644
> --- a/drivers/gpu/drm/bridge/tc358767.c
> +++ b/drivers/gpu/drm/bridge/tc358767.c
> @@ -603,8 +603,15 @@ static int tc_get_display_props(struct tc_data *tc)
>  	ret = drm_dp_link_probe(&tc->aux, &tc->link.base);
>  	if (ret < 0)
>  		goto err_dpcd_read;
> -	if ((tc->link.base.rate != 162000) && (tc->link.base.rate != 270000))
> -		goto err_dpcd_inval;
> +	if ((tc->link.base.rate != 162000) && (tc->link.base.rate != 270000)) {
> +		dev_dbg(tc->dev, "Falling to 2.7 Gbps rate\n");
> +		tc->link.base.rate = 270000;
> +	}
> +
> +	if (tc->link.base.num_lanes > 2) {
> +		dev_dbg(tc->dev, "Falling to 2 lanes\n");
> +		tc->link.base.num_lanes = 2;
> +	}
>  
>  	ret = drm_dp_dpcd_readb(&tc->aux, DP_MAX_DOWNSPREAD, tmp);
>  	if (ret < 0)
> @@ -637,9 +644,6 @@ static int tc_get_display_props(struct tc_data *tc)
>  err_dpcd_read:
>  	dev_err(tc->dev, "failed to read DPCD: %d\n", ret);
>  	return ret;
> -err_dpcd_inval:
> -	dev_err(tc->dev, "invalid DPCD\n");
> -	return -EINVAL;
>  }
>  
>  static int tc_set_video_mode(struct tc_data *tc, struct drm_display_mode *mode)

It looks like tc_get_display_props does more than its name suggests, ie
it gets display caps and matches with source caps, but this is little
bit different issue.

So:

Reviewed-by: Andrzej Hajda <a.hajda at samsung.com>

 --
Regards
Andrzej