[PATCH] drm/bridge: dw-hdmi: fix EDID parsing

Daniel Vetter daniel at ffwll.ch
Thu Nov 9 08:23:18 UTC 2017


On Tue, Nov 07, 2017 at 11:27:21AM +0000, Russell King wrote:
> Parsing the EDID for HDMI and audio information in the get_modes()
> callback is incorrect - this only parses the EDID read from the
> connector, not any override or firmware provided EDID.
> 
> The correct place to parse the EDID for these parameters is the
> fill_modes() callback, after we've called the helper.  Move the parsing
> there.  This caused problems for Luís Mendes.
> 
> Cc: <stable at vger.kernel.org>
> Reported-by: Luís Mendes <luis.p.mendes at gmail.com>
> Tested-by: Luís Mendes <luis.p.mendes at gmail.com>
> Signed-off-by: Russell King <rmk+kernel at armlinux.org.uk>
> ---
>  drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 28 ++++++++++++++++++++++++----
>  1 file changed, 24 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> index 9fe407f49986..2516a1c18a10 100644
> --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> @@ -1905,10 +1905,7 @@ static int dw_hdmi_connector_get_modes(struct drm_connector *connector)
>  		dev_dbg(hdmi->dev, "got edid: width[%d] x height[%d]\n",
>  			edid->width_cm, edid->height_cm);
>  
> -		hdmi->sink_is_hdmi = drm_detect_hdmi_monitor(edid);
> -		hdmi->sink_has_audio = drm_detect_monitor_audio(edid);
>  		drm_mode_connector_update_edid_property(connector, edid);
> -		cec_notifier_set_phys_addr_from_edid(hdmi->cec_notifier, edid);
>  		ret = drm_add_edid_modes(connector, edid);
>  		/* Store the ELD */
>  		drm_edid_to_eld(connector, edid);
> @@ -1920,6 +1917,29 @@ static int dw_hdmi_connector_get_modes(struct drm_connector *connector)
>  	return ret;
>  }
>  
> +static int dw_hdmi_connector_fill_modes(struct drm_connector *connector,
> +					uint32_t maxX, uint32_t maxY)
> +{
> +	struct dw_hdmi *hdmi = container_of(connector, struct dw_hdmi,
> +					    connector);
> +	int ret;
> +
> +	ret = drm_helper_probe_single_connector_modes(connector, maxX, maxY);
> +
> +	if (connector->edid_blob_ptr) {
> +		struct edid *edid = (void *)connector->edid_blob_ptr->data;
> +
> +		hdmi->sink_is_hdmi = drm_detect_hdmi_monitor(edid);
> +		hdmi->sink_has_audio = drm_detect_monitor_audio(edid);
> +		cec_notifier_set_phys_addr_from_edid(hdmi->cec_notifier, edid);
> +	} else {
> +		hdmi->sink_is_hdmi = false;
> +		hdmi->sink_has_audio = false;
> +	}
> +
> +	return ret;
> +}
> +
>  static void dw_hdmi_connector_force(struct drm_connector *connector)
>  {
>  	struct dw_hdmi *hdmi = container_of(connector, struct dw_hdmi,
> @@ -1933,7 +1953,7 @@ static void dw_hdmi_connector_force(struct drm_connector *connector)
>  }
>  
>  static const struct drm_connector_funcs dw_hdmi_connector_funcs = {
> -	.fill_modes = drm_helper_probe_single_connector_modes,
> +	.fill_modes = dw_hdmi_connector_fill_modes,

Papering over helper functions shouldn't be necessary, except the helper
functions not handling the override edid is a known issue. Jani Nikula is
working on a proper fix, please coordinate with him.
-Daniel

>  	.detect = dw_hdmi_connector_detect,
>  	.destroy = drm_connector_cleanup,
>  	.force = dw_hdmi_connector_force,
> -- 
> 2.7.4
> 
> _______________________________________________
> dri-devel mailing list
> dri-devel at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel

-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch


More information about the dri-devel mailing list