[RFC] [PATCH] drm: adv7511/33: Fix adv7511_cec_init() failure handling

[John Stultz]

On Fri, Nov 17, 2017 at 12:43 AM, Hans Verkuil <hverkuil at xs4all.nl> wrote:
> diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> index 3a33075dbb22..56eeeea6a1fa 100644
> --- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> +++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> @@ -1202,9 +1202,7 @@ static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
>         offset = adv7511->type == ADV7533 ? ADV7533_REG_CEC_OFFSET : 0;
>
>  #ifdef CONFIG_DRM_I2C_ADV7511_CEC
> -       ret = adv7511_cec_init(dev, adv7511, offset);
> -       if (ret)
> -               goto err_unregister_cec;
> +       adv7511_cec_init(dev, adv7511, offset);
>  #else
>         regmap_write(adv7511->regmap, ADV7511_REG_CEC_CTRL + offset,
>                      ADV7511_CEC_CTRL_POWER_DOWN);


One tiny nit-pick I realized I should have made in my patch...

In the !CONFIG_DRM_I2C_ADV7511_CEC, can you just define adv7511_cec_init() as
{
    regmap_write(adv7511->regmap, ADV7511_REG_CEC_CTRL + offset,
ADV7511_CEC_CTRL_POWER_DOWN);
}

Then we can call it either way, and don't need to have the ufly
#ifdefs in the adv7511_probe function?

thanks
-john