[PATCH v9 4/5] x86/PCI: Enable a 64bit BAR on AMD Family 15h (Models 30h-3fh) Processors v5

[Boris Ostrovsky]

On 11/22/2017 05:09 AM, Christian König wrote:
> Am 21.11.2017 um 23:26 schrieb Boris Ostrovsky:
>> On 11/21/2017 08:34 AM, Christian König wrote:
>>> Hi Boris,
>>>
>>> attached are two patches.
>>>
>>> The first one is a trivial fix for the infinite loop issue, it now
>>> correctly aborts the fixup when it can't find address space for the
>>> root window.
>>>
>>> The second is a workaround for your board. It simply checks if there
>>> is exactly one Processor Function to apply this fix on.
>>>
>>> Both are based on linus current master branch. Please test if they fix
>>> your issue.
>>
>> Yes, they do fix it but that's because the feature is disabled.
>>
>> Do you know what the actual problem was (on Xen)?
>
> I still haven't understood what you actually did with Xen.
>
> When you used PCI pass through with those devices then you have made a
> major configuration error.
>
> When the problem happened on dom0 then the explanation is most likely
> that some PCI device ended up in the configured space, but the routing
> was only setup correctly on one CPU socket.

The problem is that dom0 can be (and was in my case() booted with less
than full physical memory and so the "rest" of the host memory is not
necessarily reflected in iomem. Your patch then tried to configure that
memory for MMIO and the system hang.

And so my guess is that this patch will break dom0 on a single-socket
system as well.

-boris

>
> Regards,
> Christian.
>
>>
>> Thanks.
>> -boris
>>
>>> Thanks for the help,
>>> Christian.
>>>
>>> Am 20.11.2017 um 17:33 schrieb Boris Ostrovsky:
>>>> On 11/20/2017 11:07 AM, Christian König wrote:
>>>>> Am 20.11.2017 um 16:51 schrieb Boris Ostrovsky:
>>>>>> (and then it breaks differently as a Xen guest --- we hung on the
>>>>>> last
>>>>>> pci_read_config_dword(), I haven't looked at this at all yet)
>>>>> Hui? How does this fix applies to a Xen guest in the first place?
>>>>>
>>>>> Please provide the output of "lspci -nn" and explain further what is
>>>>> your config with Xen.
>>>>>
>>>>>
>>>> This is dom0.
>>>>
>>>> -bash-4.1# lspci -nn
>>>> 00:00.0 Host bridge [0600]: ATI Technologies Inc RD890 Northbridge
>>>> only
>>>> dual slot (2x16) PCI-e GFX Hydra part [1002:5a10] (rev 02)
>>>> 00:00.2 Generic system peripheral [0806]: ATI Technologies Inc Device
>>>> [1002:5a23]
>>>> 00:0d.0 PCI bridge [0604]: ATI Technologies Inc RD890 PCI to PCI
>>>> bridge
>>>> (external gfx1 port B) [1002:5a1e]
>>>> 00:11.0 SATA controller [0106]: ATI Technologies Inc SB700/SB800 SATA
>>>> Controller [AHCI mode] [1002:4391]
>>>> 00:12.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB
>>>> OHCI0 Controller [1002:4397]
>>>> 00:12.1 USB Controller [0c03]: ATI Technologies Inc SB700 USB OHCI1
>>>> Controller [1002:4398]
>>>> 00:12.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB
>>>> EHCI
>>>> Controller [1002:4396]
>>>> 00:13.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB
>>>> OHCI0 Controller [1002:4397]
>>>> 00:13.1 USB Controller [0c03]: ATI Technologies Inc SB700 USB OHCI1
>>>> Controller [1002:4398]
>>>> 00:13.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB
>>>> EHCI
>>>> Controller [1002:4396]
>>>> 00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller
>>>> [1002:4385] (rev 3d)
>>>> 00:14.3 ISA bridge [0601]: ATI Technologies Inc SB700/SB800 LPC host
>>>> controller [1002:439d]
>>>> 00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI
>>>> Bridge
>>>> [1002:4384]
>>>> 00:14.5 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB
>>>> OHCI2 Controller [1002:4399]
>>>> 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Device
>>>> [1022:1600]
>>>> 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Device
>>>> [1022:1601]
>>>> 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Device
>>>> [1022:1602]
>>>> 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Device
>>>> [1022:1603]
>>>> 00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Device
>>>> [1022:1604]
>>>> 00:18.5 Host bridge [0600]: Advanced Micro Devices [AMD] Device
>>>> [1022:1605]
>>>> 00:19.0 Host bridge [0600]: Advanced Micro Devices [AMD] Device
>>>> [1022:1600]
>>>> 00:19.1 Host bridge [0600]: Advanced Micro Devices [AMD] Device
>>>> [1022:1601]
>>>> 00:19.2 Host bridge [0600]: Advanced Micro Devices [AMD] Device
>>>> [1022:1602]
>>>> 00:19.3 Host bridge [0600]: Advanced Micro Devices [AMD] Device
>>>> [1022:1603]
>>>> 00:19.4 Host bridge [0600]: Advanced Micro Devices [AMD] Device
>>>> [1022:1604]
>>>> 00:19.5 Host bridge [0600]: Advanced Micro Devices [AMD] Device
>>>> [1022:1605]
>>>> 01:04.0 VGA compatible controller [0300]: Matrox Graphics, Inc. MGA
>>>> G200eW WPCM450 [102b:0532] (rev 0a)
>>>> 02:00.0 Ethernet controller [0200]: Intel Corporation 82576 Gigabit
>>>> Network Connection [8086:10c9] (rev 01)
>>>> 02:00.1 Ethernet controller [0200]: Intel Corporation 82576 Gigabit
>>>> Network Connection [8086:10c9] (rev 01)
>>>> -bash-4.1#
>>>>
>>>>
>>>> -boris
>>>
>