[PATCH 0/6] TDA998x CEC support

[Hans Verkuil]

On 11/29/17 10:11, Russell King - ARM Linux wrote:
> On Wed, Nov 29, 2017 at 08:41:45AM +0100, Hans Verkuil wrote:
>> Hi Russell,
>>
>> On 11/29/2017 12:17 AM, Russell King - ARM Linux wrote:
>>> Hi,
>>>
>>> This patch series adds CEC support to the DRM TDA998x driver.  The
>>> TDA998x family of devices integrate a TDA9950 CEC at a separate I2C
>>> address from the HDMI encoder.
>>>
>>> Implementation of the CEC part is separate to allow independent CEC
>>> implementations, or independent HDMI implementations (since the
>>> TDA9950 may be a separate device.)
>>
>> Thank you for this patch series! I assume you are testing this with a
>> BeagleBone Black? If so, do you have a patch for the dts that hooks up the
>> interrupt? If possible, I'd like to test this with my BBB.
> 
> I don't, I test it on the SolidRun Dove Cubox.  I can't help with BBB.
> 

Can you post the dts tda snippet you use for the SolidRun Dove Cubox?
Or just mail the whole thing to me, or point to a git repo where you
have it.

I can use that as a starting point for adding CEC support to the BBB.

No hurry, I can't test with my BBB until Dec 11 at the earliest anyway.

Regards,

	Hans