[PATCH v3 5/5] arm64: dts: rockchip: update mipi node for RK3399

[Brian Norris]

+ Doug, since he was asking these things elsewhere

On Tue, Nov 28, 2017 at 07:20:06PM +0800, Nickey Yang wrote:
> This patch update mipi node for RK3399 DSI controller
> based on the Synopsys DesignWare MIPI DSI host controller.
> 
> Signed-off-by: Nickey Yang <nickey.yang at rock-chips.com>
> ---
>  arch/arm64/boot/dts/rockchip/rk3399.dtsi | 8 +++++---
>  1 file changed, 5 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
> index d340b58a..0ac67a9 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
> @@ -1652,9 +1652,11 @@
>  		status = "disabled";
>  
>  		ports {
> -			mipi_in: port {
> -				#address-cells = <1>;
> -				#size-cells = <0>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;

^^ It's good to add these here, since child nodes are going to have unit
addresses.

> +
> +			mipi_in: port at 0 {
> +				reg = <0>;

^^ But you're removing the #{address,size}-cells from the port, while
still using unit addresses on its subnodes (the endpoint at ... nodes). You
should keep *both*, since both the 'ports' node and the 'port at 0' node
will have children with addresses.

Brian

>  
>  				mipi_in_vopb: endpoint at 0 {
>  					reg = <0>;
> -- 
> 1.9.1
>