[PATCH v3 3/5] dt-bindings: display: rockchip: update DSI controller

[Brian Norris]

On Tue, Nov 28, 2017 at 07:20:04PM +0800, Nickey Yang wrote:
> This patch update documentation of device tree bindings for the rockchip
> DSI controller based on the Synopsys DesignWare MIPI DSI host controller.

It might help to describe why you're doing this. Just saying "update" is
pretty vague. In this case, it's something like "describe panel/port
links, including unit addresses".

> 
> Signed-off-by: Nickey Yang <nickey.yang at rock-chips.com>
> ---
>  .../display/rockchip/dw_mipi_dsi_rockchip.txt      | 23 ++++++++++++++++++----
>  1 file changed, 19 insertions(+), 4 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt
> index 6bb59ab..336909d 100644
> --- a/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt
> +++ b/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt
> @@ -14,6 +14,8 @@ Required properties:
>  - rockchip,grf: this soc should set GRF regs to mux vopl/vopb.
>  - ports: contain a port node with endpoint definitions as defined in [2].
>    For vopb,set the reg = <0> and set the reg = <1> for vopl.
> +- video port 0 for the VOP input, the remote endpoint maybe vopb or vopl
> +- video port 1 for either a panel or subsequent encoder
>  
>  Optional properties:
>  - power-domains: a phandle to mipi dsi power domain node.
> @@ -40,11 +42,10 @@ Example:
>  		ports {
>  			#address-cells = <1>;
>  			#size-cells = <0>;
> -			reg = <1>;
>  
> -			mipi_in: port {
> -				#address-cells = <1>;
> -				#size-cells = <0>;

^^ You're removing #{address,size}-cells here, but then port at 0 will
still have subnodes that have 'reg' properties, so I think you need to
keep the -cells properties.

Brian

> +			mipi_in: port at 0 {
> +				reg = <0>;
> +
>  				mipi_in_vopb: endpoint at 0 {
>  					reg = <0>;
>  					remote-endpoint = <&vopb_out_mipi>;
> @@ -54,6 +55,14 @@ Example:
>  					remote-endpoint = <&vopl_out_mipi>;
>  				};
>  			};
> +
> +			mipi_out: port at 1 {
> +				reg = <1>;
> +
> +				mipi_out_panel: endpoint {
> +					remote-endpoint = <&panel_in_mipi>;
> +				};
> +			};
>  		};
>  
>  		panel {
> @@ -64,5 +73,11 @@ Example:
>  			pinctrl-names = "default";
>  			pinctrl-0 = <&lcd_en>;
>  			backlight = <&backlight>;
> +
> +			port {
> +				panel_in_mipi: endpoint {
> +					remote-endpoint = <&mipi_out_panel>;
> +				};
> +			};
>  		};
>  	};
> -- 
> 1.9.1
>