[PATCH 5/9] drm/panel: simple: add support for EDT ET0350 3.5" QVGA panel

[Rob Herring]

On Wed, Oct 11, 2017 at 01:23:37PM +0200, Lothar Waßmann wrote:
> Signed-off-by: Lothar Waßmann <LW at KARO-electronics.de>
> ---
>  .../bindings/display/panel/edt,et0350g0dh6.txt        |  7 +++++++

Please split bindings to separate patch.

>  drivers/gpu/drm/panel/panel-simple.c                  | 19 +++++++++++++++++++
>  2 files changed, 26 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/panel/edt,et0350g0dh6.txt
> 
> diff --git a/Documentation/devicetree/bindings/display/panel/edt,et0350g0dh6.txt b/Documentation/devicetree/bindings/display/panel/edt,et0350g0dh6.txt
> new file mode 100644
> index 0000000..5546221
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/panel/edt,et0350g0dh6.txt
> @@ -0,0 +1,7 @@
> +Emerging Display Technology Corp. 3.5" QVGA (320x240) TFT LCD panel
> +
> +Required properties:
> +- compatible: should be "edt,et0350g0dh6"
> +
> +This binding is compatible with the simple-panel binding, which is specified
> +in simple-panel.txt in this directory.

No reset lines, power supplies, etc.? Yes, simple-panel.txt defines 
properties, but you still need to specify which ones you use. Otherwise, 
I don't know if this panel has a single supply or you just forgot to 
define the supplies.

Rob