[RFC 06/11] arm64: dts: mediatek: Add Elm Rev. 3 device tree
Yingjoe Chen
yingjoe.chen at mediatek.com
Wed Oct 18 08:49:34 UTC 2017
Hi,
On Fri, 2017-09-29 at 15:09 +0200, Ulrich Hecht wrote:
> Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas at gmail.com>
> ---
> arch/arm64/boot/dts/mediatek/Makefile | 1 +
> arch/arm64/boot/dts/mediatek/mt8173-elm-rev3.dts | 21 +
> arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi | 210 +++++
> arch/arm64/boot/dts/mediatek/mt8173-oak.dtsi | 1014 ++++++++++++++++++++++
> 4 files changed, 1246 insertions(+)
> create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm-rev3.dts
> create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
> create mode 100644 arch/arm64/boot/dts/mediatek/mt8173-oak.dtsi
>
> diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
> index 151723b..0521e29 100644
> --- a/arch/arm64/boot/dts/mediatek/Makefile
> +++ b/arch/arm64/boot/dts/mediatek/Makefile
> @@ -4,6 +4,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt6795-evb.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb
> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-rev3.dtb
>
> always := $(dtb-y)
> subdir-y := $(dts-dirs)
> diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-rev3.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm-rev3.dts
> new file mode 100644
> index 0000000..68d4095
> --- /dev/null
> +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-rev3.dts
> @@ -0,0 +1,21 @@
> +/*
> + * Copyright 2016 MediaTek Inc.
> + * Author: Eddie Huang <eddie.huang at mediatek.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +/dts-v1/;
> +#include "mt8173-elm.dtsi"
> +
> +/ {
> + model = "Mediatek Elm rev3 board";
> + compatible = "google,elm-rev3", "google,elm", "mediatek,mt8173";
> +};
> diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
> new file mode 100644
> index 0000000..850037f
> --- /dev/null
> +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
> @@ -0,0 +1,210 @@
> +/*
> + * Copyright 2016 MediaTek Inc.
> + * Author: Eddie Huang <eddie.huang at mediatek.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include "mt8173-oak.dtsi"
> +
> +/ {
> + hdmicon: connector {
> + compatible = "hdmi-connector";
> + label = "hdmi";
> + type = "a";
> +
> + port {
> + hdmi_connector_in: endpoint {
> + remote-endpoint = <&hdmi_mux_out_hdmi>;
> + };
> + };
> + };
> +
> + hdmi_mux: hdmi_mux {
> + compatible = "gpio-display-mux";
Where is the binding for this?
> + status = "okay";
> + detect-gpios = <&pio 36 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&hdmi_mux_pins>;
If you use gpio_request or related api, it will set pinmux
automatically.
Do we really need this pinctrl?
> + ddc-i2c-bus = <&hdmiddc0>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port at 0 { /* input */
> + reg = <0>;
> +
> + hdmi_mux_in: endpoint {
> + remote-endpoint = <&hdmi0_out>;
> + };
> + };
> +
> + port at 1 { /* output */
> + reg = <1>;
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + hdmi_mux_out_anx: endpoint at 0 {
> + reg = <0>;
> + remote-endpoint = <&anx7688_in>;
> + };
> +
> + hdmi_mux_out_hdmi: endpoint at 1 {
> + reg = <1>;
> + remote-endpoint = <&hdmi_connector_in>;
> + };
> + };
> + };
> + };
> +
> + sound: sound {
> + compatible = "mediatek,mt8173-rt5650";
> + mediatek,audio-codec = <&rt5650 &hdmi0>;
> + mediatek,mclk = <1>;
> + mediatek,platform = <&afe>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&aud_i2s2>;
> + codec-capture {
> + sound-dai = <&rt5650 1>;
> + };
> + };
> +};
> +
> +&aud_i2s2 {
> + pins1 {
> + pinmux = <MT8173_PIN_128_I2S0_LRCK__FUNC_I2S1_WS>,
> + <MT8173_PIN_129_I2S0_BCK__FUNC_I2S1_BCK>,
> + <MT8173_PIN_130_I2S0_MCK__FUNC_I2S1_MCK>,
> + <MT8173_PIN_131_I2S0_DATA0__FUNC_I2S1_DO_1>,
> + <MT8173_PIN_12_EINT12__FUNC_I2S2_WS>,
> + <MT8173_PIN_13_EINT13__FUNC_I2S2_BCK>,
> + <MT8173_PIN_132_I2S0_DATA1__FUNC_I2S2_DI_2>;
> + bias-pull-down;
> + };
> +};
> +
> +&cpu_thermal {
> + sustainable-power = <4500>; /* milliwatts */
> + trips {
> + threshold: trip-point at 0 {
> + temperature = <60000>;
> + };
> +
> + target: trip-point at 1 {
> + temperature = <65000>;
> + };
> + };
> +};
> +
> +&cros_ec {
> + i2c_tunnel_b: i2c-tunnel at 1 {
> + compatible = "google,cros-ec-i2c-tunnel";
> + google,remote-bus = <1>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + anx7688: anx7688 at 2c {
> + compatible = "analogix,anx7688";
> + status = "okay";
> + reg = <0x2c>;
> +
> + port {
> + anx7688_in: endpoint {
> + remote-endpoint = <&hdmi_mux_out_anx>;
> + };
> + };
> + };
> + };
> +};
> +
> +&hdmi0 {
> + status = "okay";
> +
> + ports {
> + port at 1 {
> + reg = <1>;
> + hdmi0_out: endpoint {
> + remote-endpoint = <&hdmi_mux_in>;
> + };
> + };
> + };
> +};
> +
> +&hdmi_phy {
> + status = "okay";
> + mediatek,ibias = <0xc>;
> +};
> +
> +&i2c0 {
> + ps8640: edp-bridge at 8 {
> + compatible = "parade,ps8640";
binding?
> + reg = <0x8>;
> + sleep-gpios = <&pio 127 GPIO_ACTIVE_HIGH>;
> + reset-gpios = <&pio 115 GPIO_ACTIVE_HIGH>;
> + mode-sel-gpios = <&pio 92 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&ps8640_pins>;
same here.
Please check all pinctrl nodes that set FUNC to GPIO in this patch.
> + vdd12-supply = <&ps8640_fixed_1v2>;
> + vdd33-supply = <&mt6397_vgp2_reg>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port at 0 {
> + reg = <0>;
> +
> + ps8640_in: endpoint {
> + remote-endpoint = <&dsi0_out>;
> + };
> + };
> +
> + port at 1 {
> + reg = <1>;
> +
> + ps8640_out: endpoint {
> + remote-endpoint = <&panel_in>;
> + };
> + };
> + };
> +};
> +
> +&gpio_keys {
> + lid {
> + gpios = <&pio 69 GPIO_ACTIVE_LOW>;
> + };
> +};
> +
> +&mt6397_vgp6_reg {
> + regulator-always-on;
> +};
> +
> +&pio {
> + hdmi_mux_pins: hdmi_mux_pins {
> + pins1 {
> + pinmux = <MT8173_PIN_36_DAISYNC__FUNC_GPIO36>;
> + };
> + };
> +};
> +
> +&ps8640_fixed_1v2 {
> + regulator-enable-ramp-delay = <2000>;
> +};
> +
> +&rt5650 {
> + #sound-dai-cells = <1>;
> + realtek,dmic1-data-pin = <2>;
> + realtek,jd-mode = <2>;
> +};
> +
> +
> +&trackpad {
> + vcc-supply = <&mt6397_vgp6_reg>;
> +};
> diff --git a/arch/arm64/boot/dts/mediatek/mt8173-oak.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-oak.dtsi
> new file mode 100644
> index 0000000..33a5b07
> --- /dev/null
> +++ b/arch/arm64/boot/dts/mediatek/mt8173-oak.dtsi
> @@ -0,0 +1,1014 @@
> +/*
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/gpio/gpio.h>
> +#include "mt8173.dtsi"
> +#include "mt8173-pinfunc.h"
> +
> +/ {
> + aliases {
> + serial0 = &uart0;
> + serial1 = &uart1;
> + serial2 = &uart2;
> + serial3 = &uart3;
> + };
> +
> + memory at 40000000 {
> + device_type = "memory";
> + reg = <0 0x40000000 0 0x80000000>;
> + };
> +
> + backlight_lcd: backlight_lcd {
> + compatible = "pwm-backlight";
> + pwms = <&pwm0 0 1000000>;
> + brightness-levels = <
> + 0 16 32 48 64 80 96 112
> + 128 144 160 176 192 208 224 240
> + 255
> + >;
> + default-brightness-level = <9>;
> + power-supply = <&bl_fixed_reg>;
> + enable-gpios = <&pio 95 GPIO_ACTIVE_HIGH>;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&disp_pwm0_pins>;
> + status = "okay";
> + };
> +
> + bl_fixed_reg: fixedregulator at 2 {
> + compatible = "regulator-fixed";
> + regulator-name = "bl_fixed";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + startup-delay-us = <1000>;
> + enable-active-high;
> + gpio = <&pio 32 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&bl_fixed_pins>;
> + };
> +
> + chosen {
> + linux,stdout-path = &uart0;
> + };
> +
> + firmware {
> + chromeos {
> + pinctrl-names = "default";
> + pinctrl-0 = <&chromeos_write_protect>;
> + write-protect-gpio = <&pio 4 GPIO_ACTIVE_LOW>;
> + };
> + };
> +
> + gpio_keys: gpio-keys {
> + compatible = "gpio-keys";
> + pinctrl-names = "default";
> + pinctrl-0 = <&gpio_keys_pins>;
> +
> + lid {
> + label = "Lid";
> + gpios = <&pio 12 GPIO_ACTIVE_LOW>;
> + linux,code = <0>; /* SW_LID */
> + linux,input-type = <5>; /* EV_SW */
> + gpio-key,wakeup;
> + };
> +
> + power {
> + label = "Power";
> + gpios = <&pio 14 GPIO_ACTIVE_HIGH>;
> + linux,code = <KEY_POWER>;
> + debounce-interval = <30>;
> + gpio-key,wakeup;
> + };
> +
> + tablet_mode {
> + label = "Tablet_mode";
> + gpios = <&pio 121 GPIO_ACTIVE_HIGH>;
> + linux,code = <1>; /* SW_TABLET_MODE */
> + linux,input-type = <5>; /* EV_SW */
> + gpio-key,wakeup;
> + };
> +
> + volume_down {
> + label = "Volume_down";
> + gpios = <&pio 123 GPIO_ACTIVE_LOW>;
> + linux,code = <KEY_VOLUMEDOWN>;
> + };
> +
> + volume_up {
> + label = "Volume_up";
> + gpios = <&pio 124 GPIO_ACTIVE_LOW>;
> + linux,code = <KEY_VOLUMEUP>;
> + };
> + };
> +
> + panel: panel {
> + compatible = "lg,lp120up1";
> + power-supply = <&panel_fixed_3v3>;
> + ddc-i2c-bus = <&i2c4>;
> + backlight = <&backlight_lcd>;
> +
> + port {
> + panel_in: endpoint {
> + remote-endpoint = <&ps8640_out>;
> + };
> + };
> + };
> +
> + panel_fixed_3v3: regulator at 1 {
> + compatible = "regulator-fixed";
> + regulator-name = "PANEL_3V3";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + enable-active-high;
> + gpio = <&pio 41 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&panel_fixed_pins>;
> + };
> +
> + ps8640_fixed_1v2: regulator at 2 {
> + compatible = "regulator-fixed";
> + regulator-name = "PS8640_1V2";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + enable-active-high;
> + regulator-boot-on;
> + gpio = <&pio 30 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&ps8640_fixed_pins>;
> + };
> +
> + sdio_fixed_3v3: fixedregulator at 0 {
> + compatible = "regulator-fixed";
> + regulator-name = "3V3";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + gpio = <&pio 85 GPIO_ACTIVE_HIGH>;
> + };
> +
> + usb_p1_vbus: regulator at 3 {
> + compatible = "regulator-fixed";
> + regulator-name = "usb_vbus";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + gpio = <&pio 130 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> + };
> +
> + usb_p0_vbus: regulator at 4 {
> + compatible = "regulator-fixed";
> + regulator-name = "vbus";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + gpio = <&pio 9 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> + };
> +};
> +
> +&cec {
> + status = "okay";
> +};
> +
> +&cpu0 {
> + proc-supply = <&mt6397_vpca15_reg>;
> +};
> +
> +&cpu1 {
> + proc-supply = <&mt6397_vpca15_reg>;
> +};
> +
> +&cpu2 {
> + proc-supply = <&da9211_vcpu_reg>;
> + sram-supply = <&mt6397_vsramca7_reg>;
> +};
> +
> +&cpu3 {
> + proc-supply = <&da9211_vcpu_reg>;
> + sram-supply = <&mt6397_vsramca7_reg>;
> +};
> +
> +&cpu_thermal {
> + sustainable-power = <5000>; /* milliwatts */
> +};
> +
> +&dsi0 {
> + status = "okay";
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port at 1 {
> + reg = <1>;
> +
> + dsi0_out: endpoint {
> + remote-endpoint = <&ps8640_in>;
> + };
> + };
> + };
> +};
> +
> +&dpi0 {
> + status = "okay";
> +};
> +
> +&hdmi_phy {
> + status = "okay";
> + mediatek,ibias = <0x3f>;
> +};
> +
> +&i2c0 {
> + status = "okay";
> +
> + rt5650: audio-codec at 1a {
> + compatible = "realtek,rt5650";
> + reg = <0x1a>;
> + avdd-supply = <&mt6397_vgp1_reg>;
> + cpvdd-supply = <&mt6397_vcama_reg>;
> + interrupt-parent = <&pio>;
> + interrupts = <3 IRQ_TYPE_EDGE_BOTH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&rt5650_irq>;
> + realtek,jd-mode = <3>;
> + };
> +};
> +
> +&i2c1 {
> + clock-frequency = <1500000>;
> + status = "okay";
> +
> + da9211: da9211 at 68 {
> + compatible = "dlg,da9211";
> + reg = <0x68>;
> +
> + regulators {
> + da9211_vcpu_reg: BUCKA {
> + regulator-name = "VBUCKA";
> + regulator-min-microvolt = < 700000>;
> + regulator-max-microvolt = <1310000>;
> + regulator-min-microamp = <2000000>;
> + regulator-max-microamp = <4400000>;
> + regulator-ramp-delay = <10000>;
> + regulator-always-on;
> +/* regulator-supported-modes =
> + <REGULATOR_OPERATION_MODE_FAST
> + REGULATOR_OPERATION_MODE_NORMAL>;*/
Please remove unused code.
Same for all comment out parts in this patch.
Joe.C
More information about the dri-devel
mailing list