[PATCH v2] gpu/drm/bridge/sii9234: Use common error handling code in sii9234_writebm()

[SF Markus Elfring]

From: Markus Elfring <elfring at users.sourceforge.net>
Date: Sun, 22 Oct 2017 21:50:51 +0200

* Add a jump target so that a bit of exception handling can be better
  reused at the end of this function.

  This issue was detected by using the Coccinelle software.

* Adjust condition checks.

Signed-off-by: Markus Elfring <elfring at users.sourceforge.net>
---

v2:
The check for a negative error code was preserved after a call
of the function "i2c_smbus_read_byte".

 drivers/gpu/drm/bridge/sii9234.c | 28 ++++++++++------------------
 1 file changed, 10 insertions(+), 18 deletions(-)

diff --git a/drivers/gpu/drm/bridge/sii9234.c b/drivers/gpu/drm/bridge/sii9234.c
index c77000626c22..4d8b2cc29378 100644
--- a/drivers/gpu/drm/bridge/sii9234.c
+++ b/drivers/gpu/drm/bridge/sii9234.c
@@ -231,30 +231,22 @@ static int sii9234_writebm(struct sii9234 *ctx, int id, int offset,
 		return ctx->i2c_error;
 
 	ret = i2c_smbus_write_byte(client, offset);
-	if (ret < 0) {
-		dev_err(ctx->dev, "writebm: %4s[0x%02x] <- 0x%02x\n",
-			sii9234_client_name[id], offset, value);
-		ctx->i2c_error = ret;
-		return ret;
-	}
+	if (ret)
+		goto report_failure;
 
 	ret = i2c_smbus_read_byte(client);
-	if (ret < 0) {
-		dev_err(ctx->dev, "writebm: %4s[0x%02x] <- 0x%02x\n",
-			sii9234_client_name[id], offset, value);
-		ctx->i2c_error = ret;
-		return ret;
-	}
+	if (ret < 0)
+		goto report_failure;
 
 	value = (value & mask) | (ret & ~mask);
-
 	ret = i2c_smbus_write_byte_data(client, offset, value);
-	if (ret < 0) {
-		dev_err(ctx->dev, "writebm: %4s[0x%02x] <- 0x%02x\n",
-			sii9234_client_name[id], offset, value);
-		ctx->i2c_error = ret;
-	}
+	if (!ret)
+		return 0;
 
+report_failure:
+	dev_err(ctx->dev, "writebm: %4s[0x%02x] <- 0x%02x\n",
+		sii9234_client_name[id], offset, value);
+	ctx->i2c_error = ret;
 	return ret;
 }
 
-- 
2.14.2