[Intel-gfx] [PATCH 1/2] drm/dp: Bit definition for D3 power state that keeps AUX fully powered

Pandiyan, Dhinakaran dhinakaran.pandiyan at intel.com
Thu Oct 26 17:47:21 UTC 2017


On Thu, 2017-10-26 at 10:59 +0300, Jani Nikula wrote:
> On Thu, 10 Aug 2017, Dhinakaran Pandiyan <dhnkrn at gmail.com> wrote:
> > DPCD 600h - SET_POWER & SET_DP_PWR_VOLTAGE defines power state
> >
> > 101 = Set Main-Link for local Sink device and all downstream Sink
> > devices to D3 (power-down mode), keep AUX block fully powered, ready to
> > reply within a Response Timeout period of 300us.
> >
> > This state is useful in a MST dock + MST monitor configuration that
> > doesn't wake up from D3 state.
> 
> Dhinakaran, these two seem to have fallen through the cracks, please
> resend.
> 

So the "drm/dp/mst: Sideband message transaction to power up/down nodes"
series I sent fixed the DPMS issues I was seeing with my setup. We'll
have to evaluate whether this patch is still useful for anyone (probably
https://bugs.freedesktop.org/show_bug.cgi?id=90963).


> Sorry & thanks,
> Jani.
> 
> 
> >
> > Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan at intel.com>
> > ---
> >  include/drm/drm_dp_helper.h | 9 +++++----
> >  1 file changed, 5 insertions(+), 4 deletions(-)
> >
> > diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h
> > index b17476a..d77e0f5 100644
> > --- a/include/drm/drm_dp_helper.h
> > +++ b/include/drm/drm_dp_helper.h
> > @@ -614,10 +614,11 @@
> >  #define DP_BRANCH_HW_REV                    0x509
> >  #define DP_BRANCH_SW_REV                    0x50A
> >  
> > -#define DP_SET_POWER                        0x600
> > -# define DP_SET_POWER_D0                    0x1
> > -# define DP_SET_POWER_D3                    0x2
> > -# define DP_SET_POWER_MASK                  0x3
> > +#define DP_SET_POWER			0x600
> > +# define DP_SET_POWER_D0		0x1
> > +# define DP_SET_POWER_D3		0x2
> > +# define DP_SET_POWER_MASK		0x3
> > +# define DP_SET_POWER_D3_AUX_ON		0x5
> >  
> >  #define DP_EDP_DPCD_REV			    0x700    /* eDP 1.2 */
> >  # define DP_EDP_11			    0x00
> 


More information about the dri-devel mailing list