[Intel-gfx] [PATCH v3 2/7] drm: Add panel orientation quirks
Hans de Goede
hdegoede at redhat.com
Mon Oct 30 10:52:04 UTC 2017
Hi,
On 30-10-17 10:39, Daniel Vetter wrote:
> On Mon, Oct 23, 2017 at 09:14:20AM +0200, Hans de Goede wrote:
>> Some x86 clamshell design devices use portrait tablet screens and a display
>> engine which cannot rotate in hardware, so the firmware just leaves things
>> as is and we cannot figure out that the display is oriented non upright
>> from the hardware.
>>
>> So at least on x86, we need a quirk table for this. This commit adds a DMI
>> based quirk table which is initially populated with 5 such devices: Asus
>> T100HA, GPD Pocket, GPD win, I.T.Works TW891 and the VIOS LTH17.
>>
>> This quirk table will be used by the drm code to let userspace know that
>> the display is not mounted upright inside the device's case through a new
>> panel orientation drm-connector property, as well as to tell fbcon to
>> rotate the console so that it shows the right way up.
>>
>> Signed-off-by: Hans de Goede <hdegoede at redhat.com>
>
> Found a few organizational bikesheds below, but makes sense I think.
>
>> ---
>> drivers/gpu/drm/Kconfig | 3 +
>> drivers/gpu/drm/Makefile | 1 +
>> drivers/gpu/drm/drm_panel_orientation_quirks.c | 157 +++++++++++++++++++++++++
>> include/drm/drm_utils.h | 18 +++
>> 4 files changed, 179 insertions(+)
>> create mode 100644 drivers/gpu/drm/drm_panel_orientation_quirks.c
>> create mode 100644 include/drm/drm_utils.h
>>
>> diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
>> index 4d9f21831741..9d005ac98c2b 100644
>> --- a/drivers/gpu/drm/Kconfig
>> +++ b/drivers/gpu/drm/Kconfig
>> @@ -26,6 +26,9 @@ config DRM_MIPI_DSI
>> bool
>> depends on DRM
>>
>> +config DRM_PANEL_ORIENTATION_QUIRKS
>> + tristate
>
> Why a config option? We don't make the edid quirks optional either ...
You suggested this yourself while discussing v2, since at the end of the
series this is going to be required by both fbcon and the drm series, so
we may want to build it even if the drm subsys is otherwise not used.
>> +
>> config DRM_DP_AUX_CHARDEV
>> bool "DRM DP AUX Interface"
>> depends on DRM
>> diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile
>> index a3fdc5a68dff..ffb621819bbf 100644
>> --- a/drivers/gpu/drm/Makefile
>> +++ b/drivers/gpu/drm/Makefile
>> @@ -46,6 +46,7 @@ obj-$(CONFIG_DRM_DEBUG_MM_SELFTEST) += selftests/
>>
>> obj-$(CONFIG_DRM) += drm.o
>> obj-$(CONFIG_DRM_MIPI_DSI) += drm_mipi_dsi.o
>> +obj-$(CONFIG_DRM_PANEL_ORIENTATION_QUIRKS) += drm_panel_orientation_quirks.o
>
> Since it's a kms thing, probably should be added to the drm_kms_helper.ko
> module. There's panles/bridges which also should be there but aren't, but
> those aren't the best examples.
See my reply above why this cannot be done.
>> obj-$(CONFIG_DRM_ARM) += arm/
>> obj-$(CONFIG_DRM_TTM) += ttm/
>> obj-$(CONFIG_DRM_TDFX) += tdfx/
>> diff --git a/drivers/gpu/drm/drm_panel_orientation_quirks.c b/drivers/gpu/drm/drm_panel_orientation_quirks.c
>> new file mode 100644
>> index 000000000000..cea4d71f4978
>> --- /dev/null
>> +++ b/drivers/gpu/drm/drm_panel_orientation_quirks.c
>> @@ -0,0 +1,157 @@
>> +/*
>> + * drm_panel_orientation_quirks.c -- Quirks for non-normal panel orientation
>> + *
>> + * Copyright (C) 2017 Hans de Goede <hdegoede at redhat.com>
>> + *
>> + * This file is subject to the terms and conditions of the GNU General Public
>> + * License. See the file COPYING in the main directory of this archive for
>> + * more details.
>> + */
>> +
>> +#include <linux/dmi.h>
>> +#include <drm/drm_connector.h>
>> +
>> +#ifdef CONFIG_DMI
>> +
>> +/*
>> + * Some x86 clamshell design devices use portrait tablet screens and a display
>> + * engine which cannot rotate in hardware, so we need to rotate the fbcon to
>> + * compensate. Unfortunately these (cheap) devices also typically have quite
>> + * generic DMI data, so we match on a combination of DMI data, screen resolution
>> + * and a list of known BIOS dates to avoid false positives.
>> + */
>> +
>> +struct drm_dmi_panel_orientation_data {
>> + int width;
>> + int height;
>> + const char * const *bios_dates;
>> + int orientation;
>> +};
>> +
>> +static const struct drm_dmi_panel_orientation_data asus_t100ha = {
>> + .width = 800,
>> + .height = 1280,
>> + .orientation = DRM_MODE_PANEL_ORIENTATION_LEFT_UP,
>> +};
>> +
>> +static const struct drm_dmi_panel_orientation_data gpd_pocket = {
>> + .width = 1200,
>> + .height = 1920,
>> + .bios_dates = (const char * const []){ "05/26/2017", "06/28/2017",
>> + "07/05/2017", "08/07/2017", NULL },
>> + .orientation = DRM_MODE_PANEL_ORIENTATION_RIGHT_UP,
>> +};
>> +
>> +static const struct drm_dmi_panel_orientation_data gpd_win = {
>> + .width = 720,
>> + .height = 1280,
>> + .bios_dates = (const char * const []){
>> + "10/25/2016", "11/18/2016", "12/23/2016", "12/26/2016",
>> + "02/21/2017", "03/20/2017", "05/25/2017", NULL },
>> + .orientation = DRM_MODE_PANEL_ORIENTATION_RIGHT_UP,
>> +};
>> +
>> +static const struct drm_dmi_panel_orientation_data itworks_tw891 = {
>> + .width = 800,
>> + .height = 1280,
>> + .bios_dates = (const char * const []){ "10/16/2015", NULL },
>> + .orientation = DRM_MODE_PANEL_ORIENTATION_RIGHT_UP,
>> +};
>> +
>> +static const struct drm_dmi_panel_orientation_data vios_lth17 = {
>> + .width = 800,
>> + .height = 1280,
>> + .orientation = DRM_MODE_PANEL_ORIENTATION_RIGHT_UP,
>> +};
>> +
>> +static const struct dmi_system_id orientation_data[] = {
>> + { /* Asus T100HA */
>> + .matches = {
>> + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
>> + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "T100HAN"),
>> + },
>> + .driver_data = (void *)&asus_t100ha,
>> + }, { /*
>> + * GPD Pocket, note that the the DMI data is less generic then
>> + * it seems, devices with a board-vendor of "AMI Corporation"
>> + * are quite rare, as are devices which have both board- *and*
>> + * product-id set to "Default String"
>> + */
>> + .matches = {
>> + DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"),
>> + DMI_EXACT_MATCH(DMI_BOARD_NAME, "Default string"),
>> + DMI_EXACT_MATCH(DMI_BOARD_SERIAL, "Default string"),
>> + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Default string"),
>> + },
>> + .driver_data = (void *)&gpd_pocket,
>> + }, { /* GPD Win (same note on DMI match as GPD Pocket) */
>> + .matches = {
>> + DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"),
>> + DMI_EXACT_MATCH(DMI_BOARD_NAME, "Default string"),
>> + DMI_EXACT_MATCH(DMI_BOARD_SERIAL, "Default string"),
>> + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Default string"),
>> + },
>> + .driver_data = (void *)&gpd_win,
>> + }, { /* I.T.Works TW891 */
>> + .matches = {
>> + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "To be filled by O.E.M."),
>> + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "TW891"),
>> + DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "To be filled by O.E.M."),
>> + DMI_EXACT_MATCH(DMI_BOARD_NAME, "TW891"),
>> + },
>> + .driver_data = (void *)&itworks_tw891,
>> + }, { /* VIOS LTH17 */
>> + .matches = {
>> + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "VIOS"),
>> + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "LTH17"),
>> + DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "VIOS"),
>> + DMI_EXACT_MATCH(DMI_BOARD_NAME, "LTH17"),
>> + },
>> + .driver_data = (void *)&vios_lth17,
>> + },
>> + {}
>> +};
>> +
>> +int drm_get_panel_orientation_quirk(int width, int height)
>> +{
>> + const struct dmi_system_id *match;
>> + const struct drm_dmi_panel_orientation_data *data;
>> + const char *bios_date;
>> + int i;
>> +
>> + for (match = dmi_first_match(orientation_data);
>> + match;
>> + match = dmi_first_match(match + 1)) {
>> + data = match->driver_data;
>> +
>> + if (data->width != width ||
>> + data->height != height)
>> + continue;
>> +
>> + if (!data->bios_dates)
>> + return data->orientation;
>> +
>> + bios_date = dmi_get_system_info(DMI_BIOS_DATE);
>> + if (!bios_date)
>> + continue;
>> +
>> + for (i = 0; data->bios_dates[i]; i++) {
>> + if (!strcmp(data->bios_dates[i], bios_date))
>> + return data->orientation;
>> + }
>> + }
>> +
>> + return DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
>> +}
>> +EXPORT_SYMBOL(drm_get_panel_orientation_quirk);
>
> Can't we integrate this into drm_add_display_info so that it just gets
> auto-added wherever we need it? Maybe there's going to be OF and EDID ways
> os specifying this in the future ...
drm_add_display_info() only gets called from drm_add_edid_modes() and
dsi panels, which are actually the only panels I've so-far seen mounted
non-upright don't have edid info.
Note that the quirks are already automatically used in
drm_connector_init_panel_orientation_property() which the 3th patch:
"drm: Add support for a panel-orientation connector property"
adds, so drivers don't need to call the quirk code themselves.
Regards,
Hans
> -Daniel
>
>> +
>> +#else
>> +
>> +/* There are no quirks for non x86 devices yet */
>> +int drm_get_panel_orientation_quirk(int width, int height)
>> +{
>> + return DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
>> +}
>> +EXPORT_SYMBOL(drm_get_panel_orientation_quirk);
>> +
>> +#endif
>> diff --git a/include/drm/drm_utils.h b/include/drm/drm_utils.h
>> new file mode 100644
>> index 000000000000..cea362aeaffe
>> --- /dev/null
>> +++ b/include/drm/drm_utils.h
>> @@ -0,0 +1,18 @@
>> +/*
>> + * Function prototypes for misc. drm utility functions.
>> + * Specifically this file is for function prototypes for functions which
>> + * may also be used outside of drm code (e.g. in fbdev drivers).
>> + *
>> + * Copyright (C) 2017 Hans de Goede <hdegoede at redhat.com>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + */
>> +
>> +#ifndef __DRM_UTILS_H__
>> +#define __DRM_UTILS_H__
>> +
>> +int drm_get_panel_orientation_quirk(int width, int height);
>> +
>> +#endif
>> --
>> 2.14.2
>>
>> _______________________________________________
>> Intel-gfx mailing list
>> Intel-gfx at lists.freedesktop.org
>> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
>
More information about the dri-devel
mailing list