[PATCH 2/3] drm/scdc-helper: Use consistent error reporting

[Thierry Reding]

From: Thierry Reding <treding at nvidia.com>

The error messages generated by the SCDC helpers are somewhat
inconsistent with other DRM errors and even with other errors in the
same file. Fix them all up to use a common format.

Signed-off-by: Thierry Reding <treding at nvidia.com>
---
 drivers/gpu/drm/drm_scdc_helper.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/drm_scdc_helper.c b/drivers/gpu/drm/drm_scdc_helper.c
index d66c436a829e..5e6f0709df49 100644
--- a/drivers/gpu/drm/drm_scdc_helper.c
+++ b/drivers/gpu/drm/drm_scdc_helper.c
@@ -141,7 +141,7 @@ bool drm_scdc_get_scrambling_status(struct i2c_adapter *adapter)
 
 	ret = drm_scdc_readb(adapter, SCDC_SCRAMBLER_STATUS, &status);
 	if (ret < 0) {
-		DRM_ERROR("Failed to read scrambling status, error %d\n", ret);
+		DRM_ERROR("Failed to read scrambling status: %d\n", ret);
 		return false;
 	}
 
@@ -168,7 +168,7 @@ bool drm_scdc_set_scrambling(struct i2c_adapter *adapter, bool enable)
 
 	ret = drm_scdc_readb(adapter, SCDC_TMDS_CONFIG, &config);
 	if (ret < 0) {
-		DRM_ERROR("Failed to read tmds config, err=%d\n", ret);
+		DRM_ERROR("Failed to read tmds config: %d\n", ret);
 		return false;
 	}
 
@@ -179,7 +179,7 @@ bool drm_scdc_set_scrambling(struct i2c_adapter *adapter, bool enable)
 
 	ret = drm_scdc_writeb(adapter, SCDC_TMDS_CONFIG, config);
 	if (ret < 0) {
-		DRM_ERROR("Failed to enable scrambling, error %d\n", ret);
+		DRM_ERROR("Failed to enable scrambling: %d\n", ret);
 		return false;
 	}
 
@@ -223,7 +223,7 @@ bool drm_scdc_set_high_tmds_clock_ratio(struct i2c_adapter *adapter, bool set)
 
 	ret = drm_scdc_readb(adapter, SCDC_TMDS_CONFIG, &config);
 	if (ret < 0) {
-		DRM_ERROR("Failed to read tmds config, err=%d\n", ret);
+		DRM_ERROR("Failed to read tmds config: %d\n", ret);
 		return false;
 	}
 
@@ -234,7 +234,7 @@ bool drm_scdc_set_high_tmds_clock_ratio(struct i2c_adapter *adapter, bool set)
 
 	ret = drm_scdc_writeb(adapter, SCDC_TMDS_CONFIG, config);
 	if (ret < 0) {
-		DRM_ERROR("Failed to set TMDS clock ratio, error %d\n", ret);
+		DRM_ERROR("Failed to set TMDS clock ratio: %d\n", ret);
 		return false;
 	}
 
-- 
2.13.3