[PATCH v3 3/6] drm/exynos/gsc: Add hardware rotation limits
Robin Murphy
robin.murphy at arm.com
Fri Sep 8 11:58:27 UTC 2017
On 08/09/17 07:02, Hoegeun Kwon wrote:
> The gscaler has hardware rotation limits that need to be hardcoded
> into driver. Distinguish them and add them to the property list.
>
> The hardware rotation limits are related to the cropped source size.
> When swap occurs, use rot_max size instead of crop_max size.
>
> Also the scaling limits are related to pos size, use pos size to check
> the limits.
>
> Signed-off-by: Hoegeun Kwon <hoegeun.kwon at samsung.com>
> ---
> drivers/gpu/drm/exynos/exynos_drm_gsc.c | 93 +++++++++++++++++++++++----------
> include/uapi/drm/exynos_drm.h | 2 +
> 2 files changed, 66 insertions(+), 29 deletions(-)
>
> diff --git a/drivers/gpu/drm/exynos/exynos_drm_gsc.c b/drivers/gpu/drm/exynos/exynos_drm_gsc.c
> index 0506b2b..a4fb347 100644
> --- a/drivers/gpu/drm/exynos/exynos_drm_gsc.c
> +++ b/drivers/gpu/drm/exynos/exynos_drm_gsc.c
> @@ -17,6 +17,7 @@
> #include <linux/pm_runtime.h>
> #include <linux/mfd/syscon.h>
> #include <linux/regmap.h>
> +#include <linux/of_device.h>
>
> #include <drm/drmP.h>
> #include <drm/exynos_drm.h>
> @@ -150,6 +151,15 @@ struct gsc_context {
> bool suspended;
> };
>
> +/*
> + * struct gsc_driverdata - per device type driver data for init time.
> + *
> + * @rot_max: rotation max resolution.
> + */
> +struct gsc_driverdata {
> + struct drm_exynos_sz rot_max;
> +};
> +
> /* 8-tap Filter Coefficient */
> static const int h_coef_8t[GSC_COEF_RATIO][GSC_COEF_ATTR][GSC_COEF_H_8T] = {
> { /* Ratio <= 65536 (~8:8) */
> @@ -1401,6 +1411,23 @@ static int gsc_ippdrv_check_property(struct device *dev,
> bool swap;
> int i;
>
> + config = &property->config[EXYNOS_DRM_OPS_DST];
> +
> + /* check for degree */
> + switch (config->degree) {
> + case EXYNOS_DRM_DEGREE_90:
> + case EXYNOS_DRM_DEGREE_270:
> + swap = true;
> + break;
> + case EXYNOS_DRM_DEGREE_0:
> + case EXYNOS_DRM_DEGREE_180:
> + swap = false;
> + break;
> + default:
> + DRM_ERROR("invalid degree.\n");
> + goto err_property;
> + }
> +
> for_each_ipp_ops(i) {
> if ((i == EXYNOS_DRM_OPS_SRC) &&
> (property->cmd == IPP_CMD_WB))
> @@ -1416,21 +1443,6 @@ static int gsc_ippdrv_check_property(struct device *dev,
> goto err_property;
> }
>
> - /* check for degree */
> - switch (config->degree) {
> - case EXYNOS_DRM_DEGREE_90:
> - case EXYNOS_DRM_DEGREE_270:
> - swap = true;
> - break;
> - case EXYNOS_DRM_DEGREE_0:
> - case EXYNOS_DRM_DEGREE_180:
> - swap = false;
> - break;
> - default:
> - DRM_ERROR("invalid degree.\n");
> - goto err_property;
> - }
> -
> /* check for buffer bound */
> if ((pos->x + pos->w > sz->hsize) ||
> (pos->y + pos->h > sz->vsize)) {
> @@ -1438,21 +1450,27 @@ static int gsc_ippdrv_check_property(struct device *dev,
> goto err_property;
> }
>
> + /*
> + * The rotation hardware limits are related to the cropped
> + * source size. So use rot_max size to check the limits when
> + * swap happens. And also the scaling limits are related to pos
> + * size, use pos size to check the limits.
> + */
> /* check for crop */
> if ((i == EXYNOS_DRM_OPS_SRC) && (pp->crop)) {
> if (swap) {
> if ((pos->h < pp->crop_min.hsize) ||
> - (sz->vsize > pp->crop_max.hsize) ||
> + (pos->h > pp->rot_max.hsize) ||
> (pos->w < pp->crop_min.vsize) ||
> - (sz->hsize > pp->crop_max.vsize)) {
> + (pos->w > pp->rot_max.vsize)) {
> DRM_ERROR("out of crop size.\n");
> goto err_property;
> }
> } else {
> if ((pos->w < pp->crop_min.hsize) ||
> - (sz->hsize > pp->crop_max.hsize) ||
> + (pos->w > pp->crop_max.hsize) ||
> (pos->h < pp->crop_min.vsize) ||
> - (sz->vsize > pp->crop_max.vsize)) {
> + (pos->h > pp->crop_max.vsize)) {
> DRM_ERROR("out of crop size.\n");
> goto err_property;
> }
> @@ -1463,17 +1481,17 @@ static int gsc_ippdrv_check_property(struct device *dev,
> if ((i == EXYNOS_DRM_OPS_DST) && (pp->scale)) {
> if (swap) {
> if ((pos->h < pp->scale_min.hsize) ||
> - (sz->vsize > pp->scale_max.hsize) ||
> + (pos->h > pp->scale_max.hsize) ||
> (pos->w < pp->scale_min.vsize) ||
> - (sz->hsize > pp->scale_max.vsize)) {
> + (pos->w > pp->scale_max.vsize)) {
> DRM_ERROR("out of scale size.\n");
> goto err_property;
> }
> } else {
> if ((pos->w < pp->scale_min.hsize) ||
> - (sz->hsize > pp->scale_max.hsize) ||
> + (pos->w > pp->scale_max.hsize) ||
> (pos->h < pp->scale_min.vsize) ||
> - (sz->vsize > pp->scale_max.vsize)) {
> + (pos->h > pp->scale_max.vsize)) {
> DRM_ERROR("out of scale size.\n");
> goto err_property;
> }
> @@ -1657,12 +1675,34 @@ static void gsc_ippdrv_stop(struct device *dev, enum drm_exynos_ipp_cmd cmd)
> gsc_write(cfg, GSC_ENABLE);
> }
>
> +static struct gsc_driverdata gsc_exynos5250_drvdata = {
> + .rot_max = { 2048, 2048 },
> +};
> +
> +static struct gsc_driverdata gsc_exynos5420_drvdata = {
> + .rot_max = { 2016, 2016 },
> +};
> +
> +static const struct of_device_id exynos_drm_gsc_of_match[] = {
> + {
> + .compatible = "samsung,exynos5250-gsc",
> + .data = &gsc_exynos5250_drvdata,
> + },
> + {
> + .compatible = "samsung,exynos5420-gsc",
> + .data = &gsc_exynos5420_drvdata,
> + },
> + { },
> +};
> +MODULE_DEVICE_TABLE(of, exynos_drm_gsc_of_match);
> +
> static int gsc_probe(struct platform_device *pdev)
> {
> struct device *dev = &pdev->dev;
> struct gsc_context *ctx;
> struct resource *res;
> struct exynos_drm_ippdrv *ippdrv;
> + const struct gsc_driverdata *drv_data = of_device_get_match_data(dev);
> int ret;
>
> ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
> @@ -1722,6 +1762,7 @@ static int gsc_probe(struct platform_device *pdev)
> dev_err(dev, "failed to init property list.\n");
> return ret;
> }
> + ctx->ippdrv.prop_list.rot_max = drv_data->rot_max;
>
> DRM_DEBUG_KMS("id[%d]ippdrv[%pK]\n", ctx->id, ippdrv);
>
> @@ -1784,12 +1825,6 @@ static int __maybe_unused gsc_runtime_resume(struct device *dev)
> SET_RUNTIME_PM_OPS(gsc_runtime_suspend, gsc_runtime_resume, NULL)
> };
>
> -static const struct of_device_id exynos_drm_gsc_of_match[] = {
> - { .compatible = "samsung,exynos5-gsc" },
> - { },
> -};
> -MODULE_DEVICE_TABLE(of, exynos_drm_gsc_of_match);
As Krzysztof noted, this breaks compatibility with existing DTBs, and
not everyone wants to update their firmware in lock-step with their
kernel. That said, as far as I can see there's little need to remove it
anyway - as long as there is some set of lowest-common-denominator
limits that will work on any hardware variant, there doesn't seem to be
much harm in keeping a generic fallback around indefinitely.
Robin.
> -
> struct platform_driver gsc_driver = {
> .probe = gsc_probe,
> .remove = gsc_remove,
> diff --git a/include/uapi/drm/exynos_drm.h b/include/uapi/drm/exynos_drm.h
> index cb3e9f9..d5d5518 100644
> --- a/include/uapi/drm/exynos_drm.h
> +++ b/include/uapi/drm/exynos_drm.h
> @@ -192,6 +192,7 @@ enum drm_exynos_planer {
> * @crop_max: crop max resolution.
> * @scale_min: scale min resolution.
> * @scale_max: scale max resolution.
> + * @rot_max: rotation max resolution.
> */
> struct drm_exynos_ipp_prop_list {
> __u32 version;
> @@ -210,6 +211,7 @@ struct drm_exynos_ipp_prop_list {
> struct drm_exynos_sz crop_max;
> struct drm_exynos_sz scale_min;
> struct drm_exynos_sz scale_max;
> + struct drm_exynos_sz rot_max;
> };
>
> /**
>
More information about the dri-devel
mailing list