[PATCH v3 4/6] gpu: host1x: Disassemble more instructions
Mikko Perttunen
mperttunen at nvidia.com
Thu Sep 28 12:50:42 UTC 2017
The disassembler for debug dumps was missing some newer host1x opcodes.
Add disassembly support for these.
Signed-off-by: Mikko Perttunen <mperttunen at nvidia.com>
---
drivers/gpu/host1x/hw/debug_hw.c | 59 ++++++++++++++++++++++++++++++++---
drivers/gpu/host1x/hw/debug_hw_1x01.c | 2 +-
drivers/gpu/host1x/hw/debug_hw_1x06.c | 3 +-
3 files changed, 58 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/host1x/hw/debug_hw.c b/drivers/gpu/host1x/hw/debug_hw.c
index 1e67667e308c..989476801f9d 100644
--- a/drivers/gpu/host1x/hw/debug_hw.c
+++ b/drivers/gpu/host1x/hw/debug_hw.c
@@ -30,6 +30,13 @@ enum {
HOST1X_OPCODE_IMM = 0x04,
HOST1X_OPCODE_RESTART = 0x05,
HOST1X_OPCODE_GATHER = 0x06,
+ HOST1X_OPCODE_SETSTRMID = 0x07,
+ HOST1X_OPCODE_SETAPPID = 0x08,
+ HOST1X_OPCODE_SETPYLD = 0x09,
+ HOST1X_OPCODE_INCR_W = 0x0a,
+ HOST1X_OPCODE_NONINCR_W = 0x0b,
+ HOST1X_OPCODE_GATHER_W = 0x0c,
+ HOST1X_OPCODE_RESTART_W = 0x0d,
HOST1X_OPCODE_EXTEND = 0x0e,
};
@@ -38,11 +45,16 @@ enum {
HOST1X_OPCODE_EXTEND_RELEASE_MLOCK = 0x01,
};
-static unsigned int show_channel_command(struct output *o, u32 val)
+#define INVALID_PAYLOAD 0xffffffff
+
+static unsigned int show_channel_command(struct output *o, u32 val,
+ u32 *payload)
{
- unsigned int mask, subop, num;
+ unsigned int mask, subop, num, opcode;
+
+ opcode = val >> 28;
- switch (val >> 28) {
+ switch (opcode) {
case HOST1X_OPCODE_SETCLASS:
mask = val & 0x3f;
if (mask) {
@@ -97,6 +109,44 @@ static unsigned int show_channel_command(struct output *o, u32 val)
val >> 14 & 0x1, val & 0x3fff);
return 1;
+#if HOST1X_HW >= 6
+ case HOST1X_OPCODE_SETSTRMID:
+ host1x_debug_cont(o, "SETSTRMID(offset=%06x)\n",
+ val & 0x3fffff);
+ return 0;
+
+ case HOST1X_OPCODE_SETAPPID:
+ host1x_debug_cont(o, "SETAPPID(appid=%02x)\n", val & 0xff);
+ return 0;
+
+ case HOST1X_OPCODE_SETPYLD:
+ *payload = val & 0xffff;
+ host1x_debug_cont(o, "SETPYLD(data=%04x)\n", *payload);
+ return 0;
+
+ case HOST1X_OPCODE_INCR_W:
+ case HOST1X_OPCODE_NONINCR_W:
+ host1x_debug_cont(o, "%s(offset=%06x, ",
+ opcode == HOST1X_OPCODE_INCR_W ?
+ "INCR_W" : "NONINCR_W",
+ val & 0x3fffff);
+ if (*payload == 0) {
+ host1x_debug_cont(o, "[])\n");
+ return 0;
+ } else if (*payload == INVALID_PAYLOAD) {
+ host1x_debug_cont(o, "unknown)\n");
+ return 0;
+ } else {
+ host1x_debug_cont(o, "[");
+ return *payload;
+ }
+
+ case HOST1X_OPCODE_GATHER_W:
+ host1x_debug_cont(o, "GATHER_W(count=%04x, addr=[",
+ val & 0x3fff);
+ return 2;
+#endif
+
case HOST1X_OPCODE_EXTEND:
subop = val >> 24 & 0xf;
if (subop == HOST1X_OPCODE_EXTEND_ACQUIRE_MLOCK)
@@ -122,6 +172,7 @@ static void show_gather(struct output *o, phys_addr_t phys_addr,
/* Map dmaget cursor to corresponding mem handle */
u32 offset = phys_addr - pin_addr;
unsigned int data_count = 0, i;
+ u32 payload = INVALID_PAYLOAD;
/*
* Sometimes we're given different hardware address to the same
@@ -139,7 +190,7 @@ static void show_gather(struct output *o, phys_addr_t phys_addr,
if (!data_count) {
host1x_debug_output(o, "%08x: %08x: ", addr, val);
- data_count = show_channel_command(o, val);
+ data_count = show_channel_command(o, val, &payload);
} else {
host1x_debug_cont(o, "%08x%s", val,
data_count > 1 ? ", " : "])\n");
diff --git a/drivers/gpu/host1x/hw/debug_hw_1x01.c b/drivers/gpu/host1x/hw/debug_hw_1x01.c
index 09e1aa7bb5dd..8790d5fd5f20 100644
--- a/drivers/gpu/host1x/hw/debug_hw_1x01.c
+++ b/drivers/gpu/host1x/hw/debug_hw_1x01.c
@@ -112,7 +112,7 @@ static void host1x_debug_show_channel_fifo(struct host1x *host,
if (!data_count) {
host1x_debug_output(o, "%08x: ", val);
- data_count = show_channel_command(o, val);
+ data_count = show_channel_command(o, val, NULL);
} else {
host1x_debug_cont(o, "%08x%s", val,
data_count > 1 ? ", " : "])\n");
diff --git a/drivers/gpu/host1x/hw/debug_hw_1x06.c b/drivers/gpu/host1x/hw/debug_hw_1x06.c
index bd89da5dc64c..b503c740c022 100644
--- a/drivers/gpu/host1x/hw/debug_hw_1x06.c
+++ b/drivers/gpu/host1x/hw/debug_hw_1x06.c
@@ -63,6 +63,7 @@ static void host1x_debug_show_channel_fifo(struct host1x *host,
struct output *o)
{
u32 val, rd_ptr, wr_ptr, start, end;
+ u32 payload = INVALID_PAYLOAD;
unsigned int data_count = 0;
host1x_debug_output(o, "%u: fifo:\n", ch->id);
@@ -107,7 +108,7 @@ static void host1x_debug_show_channel_fifo(struct host1x *host,
if (!data_count) {
host1x_debug_output(o, "%03x 0x%08x: ",
rd_ptr - start, val);
- data_count = show_channel_command(o, val);
+ data_count = show_channel_command(o, val, &payload);
} else {
host1x_debug_cont(o, "%08x%s", val,
data_count > 1 ? ", " : "])\n");
--
2.14.1
More information about the dri-devel
mailing list