[PATCH v2 1/2] dt-bindings: arm: omap: dmm: Document new compatible for DRA7xx family

[Laurent Pinchart]

Hi Peter,

Thank you for the patch.

On Thursday, 22 March 2018 15:42:05 EEST Peter Ujfalusi wrote:
> From: Tomi Valkeinen <tomi.valkeinen at ti.com>
> 
> Define unique compatible string for the DMM in DRA7xx family.
> 
> The new compatible can be used to apply DRA7xx specific workarounds for
> ERRATAs, like i878 (MPU Lockup with concurrent DMM and EMIF accesses)
> 
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen at ti.com>

Reviewed-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>

> ---
>  Documentation/devicetree/bindings/arm/omap/dmm.txt | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/arm/omap/dmm.txt
> b/Documentation/devicetree/bindings/arm/omap/dmm.txt index
> 8bd6d0a238a8..bbbe7cdba30c 100644
> --- a/Documentation/devicetree/bindings/arm/omap/dmm.txt
> +++ b/Documentation/devicetree/bindings/arm/omap/dmm.txt
> @@ -8,7 +8,8 @@ translation for initiators which need contiguous dma bus
> addresses.
> 
>  Required properties:
>  - compatible:	Should contain "ti,omap4-dmm" for OMAP4 family
> -		Should contain "ti,omap5-dmm" for OMAP5 and DRA7x family
> +		Should contain "ti,omap5-dmm" for OMAP5 family
> +		Should contain "ti,dra7-dmm" for DRA7xx family
>  - reg:		Contains DMM register address range (base address and length)
>  - interrupts:	Should contain an interrupt-specifier for DMM_IRQ.
>  - ti,hwmods:	Name of the hwmod associated to DMM, which is typically "dmm"

-- 
Regards,

Laurent Pinchart