[PATCH 1/2] drm: Move CONFIG_HDMI-dependent code to a separate file
Thomas Huth
thuth at redhat.com
Fri Apr 13 09:40:55 UTC 2018
Selecting CONFIG_HDMI for S390 is inappropriate - there is no real
graphic hardware on this architecture. The drm subsystem is only
enabled here for using the virtual graphics card "virtio-gpu". So
it should be possible to compile the drm subsystem also without
CONFIG_DRM. Let's move the related code to a separate file for this.
Signed-off-by: Thomas Huth <thuth at redhat.com>
---
drivers/gpu/drm/Kconfig | 2 +-
drivers/gpu/drm/Makefile | 1 +
drivers/gpu/drm/drm_crtc_internal.h | 2 +
drivers/gpu/drm/drm_edid.c | 163 +-------------------------------
drivers/gpu/drm/drm_hdmi.c | 182 ++++++++++++++++++++++++++++++++++++
5 files changed, 188 insertions(+), 162 deletions(-)
create mode 100644 drivers/gpu/drm/drm_hdmi.c
diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
index deeefa7..298a518 100644
--- a/drivers/gpu/drm/Kconfig
+++ b/drivers/gpu/drm/Kconfig
@@ -8,7 +8,7 @@ menuconfig DRM
tristate "Direct Rendering Manager (XFree86 4.1.0 and higher DRI support)"
depends on (AGP || AGP=n) && !EMULATED_CMPXCHG && HAS_DMA
select DRM_PANEL_ORIENTATION_QUIRKS
- select HDMI
+ select HDMI if !S390
select FB_CMDLINE
select I2C
select I2C_ALGOBIT
diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile
index 50093ff..16fd8e3 100644
--- a/drivers/gpu/drm/Makefile
+++ b/drivers/gpu/drm/Makefile
@@ -20,6 +20,7 @@ drm-y := drm_auth.o drm_bufs.o drm_cache.o \
drm_dumb_buffers.o drm_mode_config.o drm_vblank.o \
drm_syncobj.o drm_lease.o
+drm-$(CONFIG_HDMI) += drm_hdmi.o
drm-$(CONFIG_DRM_LIB_RANDOM) += lib/drm_random.o
drm-$(CONFIG_DRM_VM) += drm_vm.o
drm-$(CONFIG_COMPAT) += drm_ioc32.o
diff --git a/drivers/gpu/drm/drm_crtc_internal.h b/drivers/gpu/drm/drm_crtc_internal.h
index 3c2b828..0804348 100644
--- a/drivers/gpu/drm/drm_crtc_internal.h
+++ b/drivers/gpu/drm/drm_crtc_internal.h
@@ -220,3 +220,5 @@ int drm_mode_page_flip_ioctl(struct drm_device *dev,
/* drm_edid.c */
void drm_mode_fixup_1366x768(struct drm_display_mode *mode);
+u8 drm_match_hdmi_mode(const struct drm_display_mode *to_match);
+bool drm_valid_hdmi_vic(u8 vic);
diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
index 134069f..3820763 100644
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -29,7 +29,6 @@
*/
#include <linux/kernel.h>
#include <linux/slab.h>
-#include <linux/hdmi.h>
#include <linux/i2c.h>
#include <linux/module.h>
#include <linux/vga_switcheroo.h>
@@ -3062,7 +3061,7 @@ static u8 drm_match_hdmi_mode_clock_tolerance(const struct drm_display_mode *to_
*
* Returns the HDMI Video ID (VIC) of the mode or 0 if it isn't one.
*/
-static u8 drm_match_hdmi_mode(const struct drm_display_mode *to_match)
+u8 drm_match_hdmi_mode(const struct drm_display_mode *to_match)
{
u8 vic;
@@ -3085,7 +3084,7 @@ static u8 drm_match_hdmi_mode(const struct drm_display_mode *to_match)
return 0;
}
-static bool drm_valid_hdmi_vic(u8 vic)
+bool drm_valid_hdmi_vic(u8 vic)
{
return vic > 0 && vic < ARRAY_SIZE(edid_4k_modes);
}
@@ -4817,76 +4816,6 @@ void drm_set_preferred_mode(struct drm_connector *connector,
EXPORT_SYMBOL(drm_set_preferred_mode);
/**
- * drm_hdmi_avi_infoframe_from_display_mode() - fill an HDMI AVI infoframe with
- * data from a DRM display mode
- * @frame: HDMI AVI infoframe
- * @mode: DRM display mode
- * @is_hdmi2_sink: Sink is HDMI 2.0 compliant
- *
- * Return: 0 on success or a negative error code on failure.
- */
-int
-drm_hdmi_avi_infoframe_from_display_mode(struct hdmi_avi_infoframe *frame,
- const struct drm_display_mode *mode,
- bool is_hdmi2_sink)
-{
- int err;
-
- if (!frame || !mode)
- return -EINVAL;
-
- err = hdmi_avi_infoframe_init(frame);
- if (err < 0)
- return err;
-
- if (mode->flags & DRM_MODE_FLAG_DBLCLK)
- frame->pixel_repeat = 1;
-
- frame->video_code = drm_match_cea_mode(mode);
-
- /*
- * HDMI 1.4 VIC range: 1 <= VIC <= 64 (CEA-861-D) but
- * HDMI 2.0 VIC range: 1 <= VIC <= 107 (CEA-861-F). So we
- * have to make sure we dont break HDMI 1.4 sinks.
- */
- if (!is_hdmi2_sink && frame->video_code > 64)
- frame->video_code = 0;
-
- /*
- * HDMI spec says if a mode is found in HDMI 1.4b 4K modes
- * we should send its VIC in vendor infoframes, else send the
- * VIC in AVI infoframes. Lets check if this mode is present in
- * HDMI 1.4b 4K modes
- */
- if (frame->video_code) {
- u8 vendor_if_vic = drm_match_hdmi_mode(mode);
- bool is_s3d = mode->flags & DRM_MODE_FLAG_3D_MASK;
-
- if (drm_valid_hdmi_vic(vendor_if_vic) && !is_s3d)
- frame->video_code = 0;
- }
-
- frame->picture_aspect = HDMI_PICTURE_ASPECT_NONE;
-
- /*
- * Populate picture aspect ratio from either
- * user input (if specified) or from the CEA mode list.
- */
- if (mode->picture_aspect_ratio == HDMI_PICTURE_ASPECT_4_3 ||
- mode->picture_aspect_ratio == HDMI_PICTURE_ASPECT_16_9)
- frame->picture_aspect = mode->picture_aspect_ratio;
- else if (frame->video_code > 0)
- frame->picture_aspect = drm_get_cea_aspect_ratio(
- frame->video_code);
-
- frame->active_aspect = HDMI_ACTIVE_ASPECT_PICTURE;
- frame->scan_mode = HDMI_SCAN_MODE_UNDERSCAN;
-
- return 0;
-}
-EXPORT_SYMBOL(drm_hdmi_avi_infoframe_from_display_mode);
-
-/**
* drm_hdmi_avi_infoframe_quant_range() - fill the HDMI AVI infoframe
* quantization range information
* @frame: HDMI AVI infoframe
@@ -4945,94 +4874,6 @@ void drm_set_preferred_mode(struct drm_connector *connector,
}
EXPORT_SYMBOL(drm_hdmi_avi_infoframe_quant_range);
-static enum hdmi_3d_structure
-s3d_structure_from_display_mode(const struct drm_display_mode *mode)
-{
- u32 layout = mode->flags & DRM_MODE_FLAG_3D_MASK;
-
- switch (layout) {
- case DRM_MODE_FLAG_3D_FRAME_PACKING:
- return HDMI_3D_STRUCTURE_FRAME_PACKING;
- case DRM_MODE_FLAG_3D_FIELD_ALTERNATIVE:
- return HDMI_3D_STRUCTURE_FIELD_ALTERNATIVE;
- case DRM_MODE_FLAG_3D_LINE_ALTERNATIVE:
- return HDMI_3D_STRUCTURE_LINE_ALTERNATIVE;
- case DRM_MODE_FLAG_3D_SIDE_BY_SIDE_FULL:
- return HDMI_3D_STRUCTURE_SIDE_BY_SIDE_FULL;
- case DRM_MODE_FLAG_3D_L_DEPTH:
- return HDMI_3D_STRUCTURE_L_DEPTH;
- case DRM_MODE_FLAG_3D_L_DEPTH_GFX_GFX_DEPTH:
- return HDMI_3D_STRUCTURE_L_DEPTH_GFX_GFX_DEPTH;
- case DRM_MODE_FLAG_3D_TOP_AND_BOTTOM:
- return HDMI_3D_STRUCTURE_TOP_AND_BOTTOM;
- case DRM_MODE_FLAG_3D_SIDE_BY_SIDE_HALF:
- return HDMI_3D_STRUCTURE_SIDE_BY_SIDE_HALF;
- default:
- return HDMI_3D_STRUCTURE_INVALID;
- }
-}
-
-/**
- * drm_hdmi_vendor_infoframe_from_display_mode() - fill an HDMI infoframe with
- * data from a DRM display mode
- * @frame: HDMI vendor infoframe
- * @connector: the connector
- * @mode: DRM display mode
- *
- * Note that there's is a need to send HDMI vendor infoframes only when using a
- * 4k or stereoscopic 3D mode. So when giving any other mode as input this
- * function will return -EINVAL, error that can be safely ignored.
- *
- * Return: 0 on success or a negative error code on failure.
- */
-int
-drm_hdmi_vendor_infoframe_from_display_mode(struct hdmi_vendor_infoframe *frame,
- struct drm_connector *connector,
- const struct drm_display_mode *mode)
-{
- /*
- * FIXME: sil-sii8620 doesn't have a connector around when
- * we need one, so we have to be prepared for a NULL connector.
- */
- bool has_hdmi_infoframe = connector ?
- connector->display_info.has_hdmi_infoframe : false;
- int err;
- u32 s3d_flags;
- u8 vic;
-
- if (!frame || !mode)
- return -EINVAL;
-
- if (!has_hdmi_infoframe)
- return -EINVAL;
-
- vic = drm_match_hdmi_mode(mode);
- s3d_flags = mode->flags & DRM_MODE_FLAG_3D_MASK;
-
- /*
- * Even if it's not absolutely necessary to send the infoframe
- * (ie.vic==0 and s3d_struct==0) we will still send it if we
- * know that the sink can handle it. This is based on a
- * suggestion in HDMI 2.0 Appendix F. Apparently some sinks
- * have trouble realizing that they shuld switch from 3D to 2D
- * mode if the source simply stops sending the infoframe when
- * it wants to switch from 3D to 2D.
- */
-
- if (vic && s3d_flags)
- return -EINVAL;
-
- err = hdmi_vendor_infoframe_init(frame);
- if (err < 0)
- return err;
-
- frame->vic = vic;
- frame->s3d_struct = s3d_structure_from_display_mode(mode);
-
- return 0;
-}
-EXPORT_SYMBOL(drm_hdmi_vendor_infoframe_from_display_mode);
-
static int drm_parse_tiled_block(struct drm_connector *connector,
struct displayid_block *block)
{
diff --git a/drivers/gpu/drm/drm_hdmi.c b/drivers/gpu/drm/drm_hdmi.c
new file mode 100644
index 0000000..9ddf538
--- /dev/null
+++ b/drivers/gpu/drm/drm_hdmi.c
@@ -0,0 +1,182 @@
+// SPDX-License-Identifier: MIT
+/*
+ * Copyright (c) 2006 Luc Verhaegen (quirks list)
+ * Copyright (c) 2007-2008 Intel Corporation
+ * Jesse Barnes <jesse.barnes at intel.com>
+ * Copyright 2010 Red Hat, Inc.
+ *
+ * DDC probing routines (drm_ddc_read & drm_do_probe_ddc_edid) originally from
+ * FB layer.
+ * Copyright (C) 2006 Dennis Munsie <dmunsie at cecropia.com>
+ */
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/hdmi.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/vga_switcheroo.h>
+#include <drm/drmP.h>
+#include <drm/drm_edid.h>
+#include <drm/drm_encoder.h>
+#include <drm/drm_displayid.h>
+#include <drm/drm_scdc_helper.h>
+
+#include "drm_crtc_internal.h"
+
+/**
+ * drm_hdmi_avi_infoframe_from_display_mode() - fill an HDMI AVI infoframe with
+ * data from a DRM display mode
+ * @frame: HDMI AVI infoframe
+ * @mode: DRM display mode
+ * @is_hdmi2_sink: Sink is HDMI 2.0 compliant
+ *
+ * Return: 0 on success or a negative error code on failure.
+ */
+int
+drm_hdmi_avi_infoframe_from_display_mode(struct hdmi_avi_infoframe *frame,
+ const struct drm_display_mode *mode,
+ bool is_hdmi2_sink)
+{
+ int err;
+
+ if (!frame || !mode)
+ return -EINVAL;
+
+ err = hdmi_avi_infoframe_init(frame);
+ if (err < 0)
+ return err;
+
+ if (mode->flags & DRM_MODE_FLAG_DBLCLK)
+ frame->pixel_repeat = 1;
+
+ frame->video_code = drm_match_cea_mode(mode);
+
+ /*
+ * HDMI 1.4 VIC range: 1 <= VIC <= 64 (CEA-861-D) but
+ * HDMI 2.0 VIC range: 1 <= VIC <= 107 (CEA-861-F). So we
+ * have to make sure we dont break HDMI 1.4 sinks.
+ */
+ if (!is_hdmi2_sink && frame->video_code > 64)
+ frame->video_code = 0;
+
+ /*
+ * HDMI spec says if a mode is found in HDMI 1.4b 4K modes
+ * we should send its VIC in vendor infoframes, else send the
+ * VIC in AVI infoframes. Lets check if this mode is present in
+ * HDMI 1.4b 4K modes
+ */
+ if (frame->video_code) {
+ u8 vendor_if_vic = drm_match_hdmi_mode(mode);
+ bool is_s3d = mode->flags & DRM_MODE_FLAG_3D_MASK;
+
+ if (drm_valid_hdmi_vic(vendor_if_vic) && !is_s3d)
+ frame->video_code = 0;
+ }
+
+ frame->picture_aspect = HDMI_PICTURE_ASPECT_NONE;
+
+ /*
+ * Populate picture aspect ratio from either
+ * user input (if specified) or from the CEA mode list.
+ */
+ if (mode->picture_aspect_ratio == HDMI_PICTURE_ASPECT_4_3 ||
+ mode->picture_aspect_ratio == HDMI_PICTURE_ASPECT_16_9)
+ frame->picture_aspect = mode->picture_aspect_ratio;
+ else if (frame->video_code > 0)
+ frame->picture_aspect = drm_get_cea_aspect_ratio(
+ frame->video_code);
+
+ frame->active_aspect = HDMI_ACTIVE_ASPECT_PICTURE;
+ frame->scan_mode = HDMI_SCAN_MODE_UNDERSCAN;
+
+ return 0;
+}
+EXPORT_SYMBOL(drm_hdmi_avi_infoframe_from_display_mode);
+
+static enum hdmi_3d_structure
+s3d_structure_from_display_mode(const struct drm_display_mode *mode)
+{
+ u32 layout = mode->flags & DRM_MODE_FLAG_3D_MASK;
+
+ switch (layout) {
+ case DRM_MODE_FLAG_3D_FRAME_PACKING:
+ return HDMI_3D_STRUCTURE_FRAME_PACKING;
+ case DRM_MODE_FLAG_3D_FIELD_ALTERNATIVE:
+ return HDMI_3D_STRUCTURE_FIELD_ALTERNATIVE;
+ case DRM_MODE_FLAG_3D_LINE_ALTERNATIVE:
+ return HDMI_3D_STRUCTURE_LINE_ALTERNATIVE;
+ case DRM_MODE_FLAG_3D_SIDE_BY_SIDE_FULL:
+ return HDMI_3D_STRUCTURE_SIDE_BY_SIDE_FULL;
+ case DRM_MODE_FLAG_3D_L_DEPTH:
+ return HDMI_3D_STRUCTURE_L_DEPTH;
+ case DRM_MODE_FLAG_3D_L_DEPTH_GFX_GFX_DEPTH:
+ return HDMI_3D_STRUCTURE_L_DEPTH_GFX_GFX_DEPTH;
+ case DRM_MODE_FLAG_3D_TOP_AND_BOTTOM:
+ return HDMI_3D_STRUCTURE_TOP_AND_BOTTOM;
+ case DRM_MODE_FLAG_3D_SIDE_BY_SIDE_HALF:
+ return HDMI_3D_STRUCTURE_SIDE_BY_SIDE_HALF;
+ default:
+ return HDMI_3D_STRUCTURE_INVALID;
+ }
+}
+
+/**
+ * drm_hdmi_vendor_infoframe_from_display_mode() - fill an HDMI infoframe with
+ * data from a DRM display mode
+ * @frame: HDMI vendor infoframe
+ * @connector: the connector
+ * @mode: DRM display mode
+ *
+ * Note that there's is a need to send HDMI vendor infoframes only when using a
+ * 4k or stereoscopic 3D mode. So when giving any other mode as input this
+ * function will return -EINVAL, error that can be safely ignored.
+ *
+ * Return: 0 on success or a negative error code on failure.
+ */
+int
+drm_hdmi_vendor_infoframe_from_display_mode(struct hdmi_vendor_infoframe *frame,
+ struct drm_connector *connector,
+ const struct drm_display_mode *mode)
+{
+ /*
+ * FIXME: sil-sii8620 doesn't have a connector around when
+ * we need one, so we have to be prepared for a NULL connector.
+ */
+ bool has_hdmi_infoframe = connector ?
+ connector->display_info.has_hdmi_infoframe : false;
+ int err;
+ u32 s3d_flags;
+ u8 vic;
+
+ if (!frame || !mode)
+ return -EINVAL;
+
+ if (!has_hdmi_infoframe)
+ return -EINVAL;
+
+ vic = drm_match_hdmi_mode(mode);
+ s3d_flags = mode->flags & DRM_MODE_FLAG_3D_MASK;
+
+ /*
+ * Even if it's not absolutely necessary to send the infoframe
+ * (ie.vic==0 and s3d_struct==0) we will still send it if we
+ * know that the sink can handle it. This is based on a
+ * suggestion in HDMI 2.0 Appendix F. Apparently some sinks
+ * have trouble realizing that they shuld switch from 3D to 2D
+ * mode if the source simply stops sending the infoframe when
+ * it wants to switch from 3D to 2D.
+ */
+
+ if (vic && s3d_flags)
+ return -EINVAL;
+
+ err = hdmi_vendor_infoframe_init(frame);
+ if (err < 0)
+ return err;
+
+ frame->vic = vic;
+ frame->s3d_struct = s3d_structure_from_display_mode(mode);
+
+ return 0;
+}
+EXPORT_SYMBOL(drm_hdmi_vendor_infoframe_from_display_mode);
--
1.8.3.1
More information about the dri-devel
mailing list