[DPU PATCH v3 2/2] drm/msm/dsi: Use one connector for dual DSI mode

Archit Taneja architt at codeaurora.org
Thu Apr 19 17:07:29 UTC 2018



On Thursday 19 April 2018 01:15 AM, Chandan Uddaraju wrote:
> Current DSI driver uses two connectors for dual DSI case even
> though we only have one panel. Fix this by implementing one
> connector/bridge for dual DSI use case. Use master DSI
> controllers to register one connector/bridge.
> 
> Changes in V2:
>      -Removed Change-Id from the commit text tags.
>      -Remove extra parentheses
> 
> Changes in V3:
>      -None

Reviewed-by: Archit Taneja <architt at codeaurora.org>

> 
> Signed-off-by: Chandan Uddaraju <chandanu at codeaurora.org>
> ---
>   drivers/gpu/drm/msm/dsi/dsi.c         |   3 +
>   drivers/gpu/drm/msm/dsi/dsi.h         |   1 +
>   drivers/gpu/drm/msm/dsi/dsi_manager.c | 110 ++++++++--------------------------
>   3 files changed, 29 insertions(+), 85 deletions(-)
> 
> diff --git a/drivers/gpu/drm/msm/dsi/dsi.c b/drivers/gpu/drm/msm/dsi/dsi.c
> index b744bcc..ff8164c 100644
> --- a/drivers/gpu/drm/msm/dsi/dsi.c
> +++ b/drivers/gpu/drm/msm/dsi/dsi.c
> @@ -208,6 +208,9 @@ int msm_dsi_modeset_init(struct msm_dsi *msm_dsi, struct drm_device *dev,
>   		goto fail;
>   	}
>   
> +	if (!msm_dsi_manager_validate_current_config(msm_dsi->id))
> +		goto fail;
> +
>   	msm_dsi->encoder = encoder;
>   
>   	msm_dsi->bridge = msm_dsi_manager_bridge_init(msm_dsi->id);
> diff --git a/drivers/gpu/drm/msm/dsi/dsi.h b/drivers/gpu/drm/msm/dsi/dsi.h
> index 01c38f6..c858e8e 100644
> --- a/drivers/gpu/drm/msm/dsi/dsi.h
> +++ b/drivers/gpu/drm/msm/dsi/dsi.h
> @@ -100,6 +100,7 @@ struct msm_dsi {
>   void msm_dsi_manager_attach_dsi_device(int id, u32 device_flags);
>   int msm_dsi_manager_register(struct msm_dsi *msm_dsi);
>   void msm_dsi_manager_unregister(struct msm_dsi *msm_dsi);
> +bool msm_dsi_manager_validate_current_config(u8 id);
>   
>   /* msm dsi */
>   static inline bool msm_dsi_device_connected(struct msm_dsi *msm_dsi)
> diff --git a/drivers/gpu/drm/msm/dsi/dsi_manager.c b/drivers/gpu/drm/msm/dsi/dsi_manager.c
> index 3bb506b..2a11f82 100644
> --- a/drivers/gpu/drm/msm/dsi/dsi_manager.c
> +++ b/drivers/gpu/drm/msm/dsi/dsi_manager.c
> @@ -306,67 +306,6 @@ static void dsi_mgr_connector_destroy(struct drm_connector *connector)
>   	kfree(dsi_connector);
>   }
>   
> -static void dsi_dual_connector_fix_modes(struct drm_connector *connector)
> -{
> -	struct drm_display_mode *mode, *m;
> -
> -	/* Only support left-right mode */
> -	list_for_each_entry_safe(mode, m, &connector->probed_modes, head) {
> -		mode->clock >>= 1;
> -		mode->hdisplay >>= 1;
> -		mode->hsync_start >>= 1;
> -		mode->hsync_end >>= 1;
> -		mode->htotal >>= 1;
> -		drm_mode_set_name(mode);
> -	}
> -}
> -
> -static int dsi_dual_connector_tile_init(
> -			struct drm_connector *connector, int id)
> -{
> -	struct drm_display_mode *mode;
> -	/* Fake topology id */
> -	char topo_id[8] = {'M', 'S', 'M', 'D', 'U', 'D', 'S', 'I'};
> -
> -	if (connector->tile_group) {
> -		DBG("Tile property has been initialized");
> -		return 0;
> -	}
> -
> -	/* Use the first mode only for now */
> -	mode = list_first_entry(&connector->probed_modes,
> -				struct drm_display_mode,
> -				head);
> -	if (!mode)
> -		return -EINVAL;
> -
> -	connector->tile_group = drm_mode_get_tile_group(
> -					connector->dev, topo_id);
> -	if (!connector->tile_group)
> -		connector->tile_group = drm_mode_create_tile_group(
> -					connector->dev, topo_id);
> -	if (!connector->tile_group) {
> -		pr_err("%s: failed to create tile group\n", __func__);
> -		return -ENOMEM;
> -	}
> -
> -	connector->has_tile = true;
> -	connector->tile_is_single_monitor = true;
> -
> -	/* mode has been fixed */
> -	connector->tile_h_size = mode->hdisplay;
> -	connector->tile_v_size = mode->vdisplay;
> -
> -	/* Only support left-right mode */
> -	connector->num_h_tile = 2;
> -	connector->num_v_tile = 1;
> -
> -	connector->tile_v_loc = 0;
> -	connector->tile_h_loc = (id == DSI_RIGHT) ? 1 : 0;
> -
> -	return 0;
> -}
> -
>   static int dsi_mgr_connector_get_modes(struct drm_connector *connector)
>   {
>   	int id = dsi_mgr_connector_get_id(connector);
> @@ -377,31 +316,15 @@ static int dsi_mgr_connector_get_modes(struct drm_connector *connector)
>   	if (!panel)
>   		return 0;
>   
> -	/* Since we have 2 connectors, but only 1 drm_panel in dual DSI mode,
> -	 * panel should not attach to any connector.
> -	 * Only temporarily attach panel to the current connector here,
> -	 * to let panel set mode to this connector.
> +	/*
> +	 * In dual DSI mode, we have one connector that can be
> +	 * attached to the drm_panel.
>   	 */
>   	drm_panel_attach(panel, connector);
>   	num = drm_panel_get_modes(panel);
> -	drm_panel_detach(panel);
>   	if (!num)
>   		return 0;
>   
> -	if (IS_DUAL_DSI()) {
> -		/* report half resolution to user */
> -		dsi_dual_connector_fix_modes(connector);
> -		ret = dsi_dual_connector_tile_init(connector, id);
> -		if (ret)
> -			return ret;
> -		ret = drm_mode_connector_set_tile_property(connector);
> -		if (ret) {
> -			pr_err("%s: set tile property failed, %d\n",
> -					__func__, ret);
> -			return ret;
> -		}
> -	}
> -
>   	return num;
>   }
>   
> @@ -455,8 +378,8 @@ static void dsi_mgr_bridge_pre_enable(struct drm_bridge *bridge)
>   	if (ret)
>   		goto phy_en_fail;
>   
> -	/* Do nothing with the host if it is DSI 1 in case of dual DSI */
> -	if (is_dual_dsi && (DSI_1 == id))
> +	/* Do nothing with the host if it is slave-DSI in case of dual DSI */
> +	if (is_dual_dsi && !IS_MASTER_DSI_LINK(id))
>   		return;
>   
>   	ret = msm_dsi_host_power_on(host, &phy_shared_timings[id], is_dual_dsi);
> @@ -557,11 +480,11 @@ static void dsi_mgr_bridge_post_disable(struct drm_bridge *bridge)
>   		return;
>   
>   	/*
> -	 * Do nothing with the host if it is DSI 1 in case of dual DSI.
> +	 * Do nothing with the host if it is slave-DSI in case of dual DSI.
>   	 * It is safe to call dsi_mgr_phy_disable() here because a single PHY
>   	 * won't be diabled until both PHYs request disable.
>   	 */
> -	if (is_dual_dsi && (DSI_1 == id))
> +	if (is_dual_dsi && !IS_MASTER_DSI_LINK(id))
>   		goto disable_phy;
>   
>   	if (panel) {
> @@ -622,7 +545,7 @@ static void dsi_mgr_bridge_mode_set(struct drm_bridge *bridge,
>   			mode->vsync_end, mode->vtotal,
>   			mode->type, mode->flags);
>   
> -	if (is_dual_dsi && (DSI_1 == id))
> +	if (is_dual_dsi && !IS_MASTER_DSI_LINK(id))
>   		return;
>   
>   	msm_dsi_host_set_display_mode(host, adjusted_mode);
> @@ -690,6 +613,23 @@ struct drm_connector *msm_dsi_manager_connector_init(u8 id)
>   	return connector;
>   }
>   
> +bool msm_dsi_manager_validate_current_config(u8 id)
> +{
> +	bool is_dual_dsi = IS_DUAL_DSI();
> +
> +	/*
> +	 * For dual DSI, we only have one drm panel. For this
> +	 * use case, we register only one bridge/connector.
> +	 * Skip bridge/connector initialisation if it is
> +	 * slave-DSI for dual DSI configuration.
> +	 */
> +	if (is_dual_dsi && !IS_MASTER_DSI_LINK(id)) {
> +		DBG("Skip bridge registration for slave DSI->id: %d\n", id);
> +		return false;
> +	}
> +	return true;
> +}
> +
>   /* initialize bridge */
>   struct drm_bridge *msm_dsi_manager_bridge_init(u8 id)
>   {
> 


More information about the dri-devel mailing list