[PATCH 2/2] drm/panel: rm67191: Add support for new bus formats

[Thierry Reding]

On Tue, Apr 03, 2018 at 01:30:01PM +0300, Robert Chiras wrote:
> From: Mirela Rabulea <mirela.rabulea at nxp.com>
> 
> Do not hardcode pixel_format to 0x77 but calculate it from dsi->format.
> Report all the supported bus formats in get_modes:
>         MEDIA_BUS_FMT_RGB888_1X24
>         MEDIA_BUS_FMT_RGB666_1X18
>         MEDIA_BUS_FMT_RGB565_1X16
> Change pixelclock from 120 to 132 MHz, or 16 bpp formats will not work.
> 
> Signed-off-by: Mirela Rabulea <mirela.rabulea at nxp.com>
> ---
>  drivers/gpu/drm/panel/panel-raydium-rm67191.c | 33 +++++++++++++++++++++++----
>  1 file changed, 28 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/gpu/drm/panel/panel-raydium-rm67191.c b/drivers/gpu/drm/panel/panel-raydium-rm67191.c
> index 07b0bd4..6331fef 100644
> --- a/drivers/gpu/drm/panel/panel-raydium-rm67191.c
> +++ b/drivers/gpu/drm/panel/panel-raydium-rm67191.c
> @@ -178,6 +178,12 @@ static const cmd_set_table manufacturer_cmd_set[] = {
>  	{0x51, 0x04},
>  };
>  
> +static const u32 rad_bus_formats[] = {
> +	MEDIA_BUS_FMT_RGB888_1X24,
> +	MEDIA_BUS_FMT_RGB666_1X18,
> +	MEDIA_BUS_FMT_RGB565_1X16,
> +};
> +
>  struct rad_panel {
>  	struct drm_panel base;
>  	struct mipi_dsi_device *dsi;
> @@ -215,11 +221,27 @@ static int rad_panel_push_cmd_list(struct mipi_dsi_device *dsi)
>  	return ret;
>  };
>  
> +static int color_format_from_dsi_format(enum mipi_dsi_pixel_format format)
> +{
> +	switch (format) {
> +	case MIPI_DSI_FMT_RGB565:
> +		return 0x55;
> +	case MIPI_DSI_FMT_RGB666:
> +	case MIPI_DSI_FMT_RGB666_PACKED:
> +		return 0x66;
> +	case MIPI_DSI_FMT_RGB888:
> +		return 0x77;
> +	default:
> +		return 0x77; /* for backward compatibility */
> +	}
> +};
> +
>  static int rad_panel_prepare(struct drm_panel *panel)
>  {
>  	struct rad_panel *rad = to_rad_panel(panel);
>  	struct mipi_dsi_device *dsi = rad->dsi;
>  	struct device *dev = &dsi->dev;
> +	int color_format = color_format_from_dsi_format(dsi->format);
>  	int ret;
>  
>  	if (rad->prepared)
> @@ -276,8 +298,10 @@ static int rad_panel_prepare(struct drm_panel *panel)
>  		DRM_DEV_ERROR(dev, "Failed to set tear scanline (%d)\n", ret);
>  		goto fail;
>  	}
> -	/* Set pixel format to RGB888 */
> -	ret = mipi_dsi_dcs_set_pixel_format(dsi, 0x77);
> +	/* Set pixel format */
> +	ret = mipi_dsi_dcs_set_pixel_format(dsi, color_format);
> +	DRM_DEV_DEBUG_DRIVER(dev, "Interface color format set to 0x%x\n",
> +				color_format);
>  	if (ret < 0) {
>  		DRM_DEV_ERROR(dev, "Failed to set pixel format (%d)\n", ret);
>  		goto fail;
> @@ -393,7 +417,6 @@ static int rad_panel_get_modes(struct drm_panel *panel)
>  	struct device *dev = &rad->dsi->dev;
>  	struct drm_connector *connector = panel->connector;
>  	struct drm_display_mode *mode;
> -	u32 bus_format = MEDIA_BUS_FMT_RGB888_1X24;
>  	u32 *bus_flags = &connector->display_info.bus_flags;
>  	int ret;
>  
> @@ -420,7 +443,7 @@ static int rad_panel_get_modes(struct drm_panel *panel)
>  		*bus_flags |= DRM_BUS_FLAG_PIXDATA_POSEDGE;
>  
>  	ret = drm_display_info_set_bus_formats(&connector->display_info,
> -					       &bus_format, 1);
> +			rad_bus_formats, ARRAY_SIZE(rad_bus_formats));
>  	if (ret)
>  		return ret;
>  
> @@ -492,7 +515,7 @@ static const struct drm_panel_funcs rad_panel_funcs = {
>   * to 132MHz (60Hz refresh rate)
>   */
>  static const struct display_timing rad_default_timing = {
> -	.pixelclock = { 66000000, 120000000, 132000000 },
> +	.pixelclock = { 66000000, 132000000, 132000000 },

This seems like a fix that should be squashed into patch 1.

Thierry
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <https://lists.freedesktop.org/archives/dri-devel/attachments/20180426/db246739/attachment.sig>