[PATCH v4 2/2] drivers: remove force dma flag from buses

Nipun Gupta nipun.gupta at nxp.com
Sat Apr 28 02:51:59 UTC 2018


With each bus implementing its own DMA configuration callback,
there is no need for bus to explicitly have force_dma in its
global structure. This patch modifies of_dma_configure API to
accept an input parameter which specifies if implicit DMA
configuration is required even when it is not described by the
firmware.

Signed-off-by: Nipun Gupta <nipun.gupta at nxp.com>
Acked-by: Bjorn Helgaas <bhelgaas at google.com>  # PCI parts
---
Changes in v2:
  - This is a new change suggested by Robin and Christoph
    and is added to the series.

Changes in v3:
  - Rebase and changes corresponding to the changes in patch 1/2

Changes in v4:
  - Rebased on top of 4.17-rc2

 drivers/amba/bus.c            | 1 -
 drivers/base/platform.c       | 3 +--
 drivers/bcma/main.c           | 2 +-
 drivers/dma/qcom/hidma_mgmt.c | 2 +-
 drivers/gpu/host1x/bus.c      | 5 ++---
 drivers/of/device.c           | 6 ++++--
 drivers/of/of_reserved_mem.c  | 2 +-
 drivers/pci/pci-driver.c      | 3 +--
 include/linux/device.h        | 4 ----
 include/linux/of_device.h     | 8 ++++++--
 10 files changed, 17 insertions(+), 19 deletions(-)

diff --git a/drivers/amba/bus.c b/drivers/amba/bus.c
index 867dc2b..abe73c4 100644
--- a/drivers/amba/bus.c
+++ b/drivers/amba/bus.c
@@ -199,7 +199,6 @@ struct bus_type amba_bustype = {
 	.uevent		= amba_uevent,
 	.dma_configure	= platform_dma_configure,
 	.pm		= &amba_pm,
-	.force_dma	= true,
 };
 
 static int __init amba_init(void)
diff --git a/drivers/base/platform.c b/drivers/base/platform.c
index 638d42e..c0ff1e7 100644
--- a/drivers/base/platform.c
+++ b/drivers/base/platform.c
@@ -1136,7 +1136,7 @@ int platform_dma_configure(struct device *dev)
 	int ret = 0;
 
 	if (dev->of_node) {
-		ret = of_dma_configure(dev, dev->of_node);
+		ret = of_dma_configure(dev, dev->of_node, true);
 	} else if (has_acpi_companion(dev)) {
 		attr = acpi_get_dma_attr(to_acpi_device_node(dev->fwnode));
 		if (attr != DEV_DMA_NOT_SUPPORTED)
@@ -1159,7 +1159,6 @@ struct bus_type platform_bus_type = {
 	.uevent		= platform_uevent,
 	.dma_configure	= platform_dma_configure,
 	.pm		= &platform_dev_pm_ops,
-	.force_dma	= true,
 };
 EXPORT_SYMBOL_GPL(platform_bus_type);
 
diff --git a/drivers/bcma/main.c b/drivers/bcma/main.c
index e6986c7..fc1f4ac 100644
--- a/drivers/bcma/main.c
+++ b/drivers/bcma/main.c
@@ -207,7 +207,7 @@ static void bcma_of_fill_device(struct device *parent,
 
 	core->irq = bcma_of_get_irq(parent, core, 0);
 
-	of_dma_configure(&core->dev, node);
+	of_dma_configure(&core->dev, node, false);
 }
 
 unsigned int bcma_core_irq(struct bcma_device *core, int num)
diff --git a/drivers/dma/qcom/hidma_mgmt.c b/drivers/dma/qcom/hidma_mgmt.c
index 000c7019..d64edeb 100644
--- a/drivers/dma/qcom/hidma_mgmt.c
+++ b/drivers/dma/qcom/hidma_mgmt.c
@@ -398,7 +398,7 @@ static int __init hidma_mgmt_of_populate_channels(struct device_node *np)
 		}
 		of_node_get(child);
 		new_pdev->dev.of_node = child;
-		of_dma_configure(&new_pdev->dev, child);
+		of_dma_configure(&new_pdev->dev, child, true);
 		/*
 		 * It is assumed that calling of_msi_configure is safe on
 		 * platforms with or without MSI support.
diff --git a/drivers/gpu/host1x/bus.c b/drivers/gpu/host1x/bus.c
index a9ec99d..b39c1e9 100644
--- a/drivers/gpu/host1x/bus.c
+++ b/drivers/gpu/host1x/bus.c
@@ -317,7 +317,7 @@ static int host1x_device_match(struct device *dev, struct device_driver *drv)
 static int host1x_dma_configure(struct device *dev)
 {
 	if (dev->of_node)
-		return of_dma_configure(dev, dev->of_node);
+		return of_dma_configure(dev, dev->of_node, true);
 	return 0;
 }
 
@@ -335,7 +335,6 @@ struct bus_type host1x_bus_type = {
 	.match = host1x_device_match,
 	.dma_configure	= host1x_dma_configure,
 	.pm = &host1x_device_pm_ops,
-	.force_dma = true,
 };
 
 static void __host1x_device_del(struct host1x_device *device)
@@ -424,7 +423,7 @@ static int host1x_device_add(struct host1x *host1x,
 	device->dev.bus = &host1x_bus_type;
 	device->dev.parent = host1x->dev;
 
-	of_dma_configure(&device->dev, host1x->dev->of_node);
+	of_dma_configure(&device->dev, host1x->dev->of_node, true);
 
 	err = host1x_device_parse_dt(device, driver);
 	if (err < 0) {
diff --git a/drivers/of/device.c b/drivers/of/device.c
index 064c818..33d8551 100644
--- a/drivers/of/device.c
+++ b/drivers/of/device.c
@@ -76,6 +76,8 @@ int of_device_add(struct platform_device *ofdev)
  * of_dma_configure - Setup DMA configuration
  * @dev:	Device to apply DMA configuration
  * @np:		Pointer to OF node having DMA configuration
+ * @force_dma:  Whether device is to be set up by of_dma_configure() even if
+ *		DMA capability is not explicitly described by firmware.
  *
  * Try to get devices's DMA configuration from DT and update it
  * accordingly.
@@ -84,7 +86,7 @@ int of_device_add(struct platform_device *ofdev)
  * can use a platform bus notifier and handle BUS_NOTIFY_ADD_DEVICE events
  * to fix up DMA configuration.
  */
-int of_dma_configure(struct device *dev, struct device_node *np)
+int of_dma_configure(struct device *dev, struct device_node *np, bool force_dma)
 {
 	u64 dma_addr, paddr, size = 0;
 	int ret;
@@ -100,7 +102,7 @@ int of_dma_configure(struct device *dev, struct device_node *np)
 		 * DMA configuration regardless of whether "dma-ranges" is
 		 * correctly specified or not.
 		 */
-		if (!dev->bus->force_dma)
+		if (!force_dma)
 			return ret == -ENODEV ? 0 : ret;
 
 		dma_addr = offset = 0;
diff --git a/drivers/of/of_reserved_mem.c b/drivers/of/of_reserved_mem.c
index 9a4f4246..895c83e 100644
--- a/drivers/of/of_reserved_mem.c
+++ b/drivers/of/of_reserved_mem.c
@@ -353,7 +353,7 @@ int of_reserved_mem_device_init_by_idx(struct device *dev,
 		/* ensure that dma_ops is set for virtual devices
 		 * using reserved memory
 		 */
-		of_dma_configure(dev, np);
+		of_dma_configure(dev, np, true);
 
 		dev_info(dev, "assigned reserved memory node %s\n", rmem->name);
 	} else {
diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index ba8c6b4..f8269a7 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -1595,7 +1595,7 @@ static int pci_dma_configure(struct device *dev)
 
 	if (IS_ENABLED(CONFIG_OF) && bridge->parent &&
 	    bridge->parent->of_node) {
-		ret = of_dma_configure(dev, bridge->parent->of_node);
+		ret = of_dma_configure(dev, bridge->parent->of_node, true);
 	} else if (has_acpi_companion(bridge)) {
 		struct acpi_device *adev = to_acpi_device_node(bridge->fwnode);
 		enum dev_dma_attr attr = acpi_get_dma_attr(adev);
@@ -1621,7 +1621,6 @@ struct bus_type pci_bus_type = {
 	.pm		= PCI_PM_OPS_PTR,
 	.num_vf		= pci_bus_num_vf,
 	.dma_configure	= pci_dma_configure,
-	.force_dma	= true,
 };
 EXPORT_SYMBOL(pci_bus_type);
 
diff --git a/include/linux/device.h b/include/linux/device.h
index 607c7eb..31dcb29 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -98,8 +98,6 @@ extern int __must_check bus_create_file(struct bus_type *,
  * @p:		The private data of the driver core, only the driver core can
  *		touch this.
  * @lock_key:	Lock class key for use by the lock validator
- * @force_dma:	Assume devices on this bus should be set up by dma_configure()
- * 		even if DMA capability is not explicitly described by firmware.
  *
  * A bus is a channel between the processor and one or more devices. For the
  * purposes of the device model, all devices are connected via a bus, even if
@@ -140,8 +138,6 @@ struct bus_type {
 
 	struct subsys_private *p;
 	struct lock_class_key lock_key;
-
-	bool force_dma;
 };
 
 extern int __must_check bus_register(struct bus_type *bus);
diff --git a/include/linux/of_device.h b/include/linux/of_device.h
index 8da5a1b..165fd30 100644
--- a/include/linux/of_device.h
+++ b/include/linux/of_device.h
@@ -55,7 +55,9 @@ static inline struct device_node *of_cpu_device_node_get(int cpu)
 	return of_node_get(cpu_dev->of_node);
 }
 
-int of_dma_configure(struct device *dev, struct device_node *np);
+int of_dma_configure(struct device *dev,
+		     struct device_node *np,
+		     bool force_dma);
 void of_dma_deconfigure(struct device *dev);
 #else /* CONFIG_OF */
 
@@ -105,7 +107,9 @@ static inline struct device_node *of_cpu_device_node_get(int cpu)
 	return NULL;
 }
 
-static inline int of_dma_configure(struct device *dev, struct device_node *np)
+static inline int of_dma_configure(struct device *dev,
+				   struct device_node *np,
+				   bool force_dma)
 {
 	return 0;
 }
-- 
1.9.1



More information about the dri-devel mailing list