[PATCH 3/5] arm64: dts: renesas: r8a77995: Add LVDS support

[jacopo mondi]

Hi Ulrich,
   I know this series needs to be re-spin when the D3/E3 LVDS PLL
support will be added, but since I need it for testing on D3 the LVDS
interface reset support, I noticed a small issue which I thought it is
worth reporting.

On Tue, May 15, 2018 at 02:20:38PM +0200, Ulrich Hecht wrote:
> From: Kieran Bingham <kieran.bingham+renesas at ideasonboard.com>
>
> The r8a77995 D3 platform has 2 LVDS channels connected to the DU.
>
> Signed-off-by: Kieran Bingham <kieran.bingham+renesas at ideasonboard.com>
> [uli: moved lvds* into the soc node, added PM domains, resets]
> Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas at gmail.com>
> ---
>  arch/arm64/boot/dts/renesas/r8a77995.dtsi | 56 +++++++++++++++++++++++++++++++
>  1 file changed, 56 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/renesas/r8a77995.dtsi b/arch/arm64/boot/dts/renesas/r8a77995.dtsi
> index ba98865..8e78110d 100644
> --- a/arch/arm64/boot/dts/renesas/r8a77995.dtsi
> +++ b/arch/arm64/boot/dts/renesas/r8a77995.dtsi
> @@ -757,12 +757,68 @@
>  				port at 1 {
>  					reg = <1>;
>  					du_out_lvds0: endpoint {
> +						remote-endpoint = <&lvds0_in>;
>  					};
>  				};
>
>  				port at 2 {
>  					reg = <2>;
>  					du_out_lvds1: endpoint {
> +						remote-endpoint = <&lvds1_in>;
> +					};
> +				};
> +			};
> +		};
> +
> +		lvds0: lvds-encoder at feb90000 {
> +			compatible = "renesas,r8a77995-lvds";
> +			reg = <0 0xfeb90000 0 0x20>;
> +			clocks = <&cpg CPG_MOD 727>;
> +			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
> +			resets = <&cpg 727>;
> +			status = "disabled";
> +
> +			ports {
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +
> +				port at 0 {
> +					reg = <0>;
> +					lvds0_in: endpoint {
> +						remote-endpoint = <&du_out_lvds0>;
> +					};
> +				};
> +
> +				port at 1 {
> +					reg = <1>;
> +					lvds0_out: endpoint {
> +					};
> +				};
> +			};
> +		};
> +
> +		lvds1: lvds-encoder at feb90100 {
> +			compatible = "renesas,r8a77995-lvds";
> +			reg = <0 0xfeb90100 0 0x20>;
> +			clocks = <&cpg CPG_MOD 727>;
> +			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
> +			resets = <&cpg 727>;

The LVDS-IF1 CPG reset is SRCR7[26], this I think this should be
<&cpg 726>

Please note that the most recent chip manual release has probably an
error at page 3180, section 37-32

5. When display on in the LVDS0-IF, it is necessary to reset (SRCR7[27]) and reset clearing (SRSTCLR7[27])
LVDS0-IF module.
When display on in the LVDS1-IF, it is necessary to reset (SRCR7[26]) and reset clearing (SRSTCLR7[26])
LVDS0-IF module
    ^- This should probablt be LVDS1-IF

Thanks
   j

> +			status = "disabled";
> +
> +			ports {
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +
> +				port at 0 {
> +					reg = <0>;
> +					lvds1_in: endpoint {
> +						remote-endpoint = <&du_out_lvds1>;
> +					};
> +				};
> +
> +				port at 1 {
> +					reg = <1>;
> +					lvds1_out: endpoint {
>  					};
>  				};
>  			};
> --
> 2.7.4
>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <https://lists.freedesktop.org/archives/dri-devel/attachments/20180801/b03896cb/attachment.sig>