[PATCH v5 08/11] media: vsp1: Add support for extended display list headers
Laurent Pinchart
laurent.pinchart at ideasonboard.com
Thu Aug 2 14:39:11 UTC 2018
Hi Kieran,
Thank you for the patch.
On Tuesday, 17 July 2018 23:35:50 EEST Kieran Bingham wrote:
> From: Kieran Bingham <kieran.bingham+renesas at ideasonboard.com>
>
> Extended display list headers allow pre and post command lists to be
> executed by the VSP pipeline. This provides the base support for
> features such as AUTO_FLD (for interlaced support) and AUTO_DISP (for
> supporting continuous camera preview pipelines.
>
> Signed-off-by: Kieran Bingham <kieran.bingham+renesas at ideasonboard.com>
>
> ---
>
> v2:
> - remove __packed attributes
>
> v5:
> - Rename vsp1_dl_ext_header field names
> - Rename @extended -> @extension
> - Remove unnecessary VI6_DL_SWAP changes
> - Rename @cmd_opcode -> @opcode
> - Drop unused @data_size field
> - Move iteration of WPF's inside vsp1_dlm_setup
> - Rename vsp1_dl_ext_cmd_header -> vsp1_pre_ext_dl_body
> - Rename vsp1_pre_ext_dl_body->cmd to vsp1_pre_ext_dl_body->opcode
> - Rename vsp1_dl_ext_header->reserved0 to vsp1_dl_ext_header->padding
> - vsp1_pre_ext_dl_body: Rename 'data' to 'address_set'
> - vsp1_pre_ext_dl_body: Add struct documentation
> - Document ordering of 16bit accesses for flags in vsp1_dl_ext_header
>
> drivers/media/platform/vsp1/vsp1.h | 1 +-
> drivers/media/platform/vsp1/vsp1_dl.c | 104 ++++++++++++++++++++++++-
> drivers/media/platform/vsp1/vsp1_dl.h | 25 ++++++-
> drivers/media/platform/vsp1/vsp1_drv.c | 4 +-
> drivers/media/platform/vsp1/vsp1_regs.h | 2 +-
> 5 files changed, 132 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/media/platform/vsp1/vsp1.h
> b/drivers/media/platform/vsp1/vsp1.h index f0d21cc8e9ab..56c62122a81a
> 100644
> --- a/drivers/media/platform/vsp1/vsp1.h
> +++ b/drivers/media/platform/vsp1/vsp1.h
> @@ -53,6 +53,7 @@ struct vsp1_uif;
> #define VSP1_HAS_HGO (1 << 7)
> #define VSP1_HAS_HGT (1 << 8)
> #define VSP1_HAS_BRS (1 << 9)
> +#define VSP1_HAS_EXT_DL (1 << 10)
>
> struct vsp1_device_info {
> u32 version;
> diff --git a/drivers/media/platform/vsp1/vsp1_dl.c
> b/drivers/media/platform/vsp1/vsp1_dl.c index 90e0a11c29b5..2fffe977aa35
> 100644
> --- a/drivers/media/platform/vsp1/vsp1_dl.c
> +++ b/drivers/media/platform/vsp1/vsp1_dl.c
> @@ -22,6 +22,9 @@
> #define VSP1_DLH_INT_ENABLE (1 << 1)
> #define VSP1_DLH_AUTO_START (1 << 0)
>
> +#define VSP1_DLH_EXT_PRE_CMD_EXEC (1 << 9)
> +#define VSP1_DLH_EXT_POST_CMD_EXEC (1 << 8)
> +
> struct vsp1_dl_header_list {
> u32 num_bytes;
> u32 addr;
> @@ -34,12 +37,59 @@ struct vsp1_dl_header {
> u32 flags;
> };
>
> +/**
> + * struct vsp1_dl_ext_header - Extended display list header
> + * @padding: padding zero bytes for alignment
> + * @pre_ext_dl_num_cmd: number of pre-extended command bodies to parse
> + * @flags: enables or disables execution of the pre and post command
> + * @pre_ext_dl_plist: start address of pre-extended display list bodies
> + * @post_ext_dl_num_cmd: number of post-extended command bodies to parse
> + * @post_ext_dl_plist: start address of post-extended display list bodies
> + */
> +struct vsp1_dl_ext_header {
> + u32 padding;
> +
> + /*
> + * The datasheet represents flags as stored before pre_ext_dl_num_cmd,
> + * expecting 32-bit accesses. The flags are appropriate to the whole
> + * header, not just the pre_ext command, and thus warrant being
> + * separated out. Due to byte ordering, and representing as 16 bit
> + * values here, the flags must be positioned after the
> + * pre_ext_dl_num_cmd.
> + */
> + u16 pre_ext_dl_num_cmd;
> + u16 flags;
> + u32 pre_ext_dl_plist;
> +
> + u32 post_ext_dl_num_cmd;
> + u32 post_ext_dl_plist;
> +};
> +
> +struct vsp1_dl_header_extended {
> + struct vsp1_dl_header header;
> + struct vsp1_dl_ext_header ext;
> +};
> +
> struct vsp1_dl_entry {
> u32 addr;
> u32 data;
> };
>
> /**
> + * struct vsp1_pre_ext_dl_body - Pre Extended Display List Body
> + * @opcode: Extended display list command operation code
> + * @flags: Pre-extended command flags. These are specific to each command
> + * @address_set: Source address set pointer. Must have 16 byte alignment
s/byte/bytes/
> + * @reserved: Zero bits for alignment.
> + */
> +struct vsp1_pre_ext_dl_body {
> + u32 opcode;
> + u32 flags;
> + u32 address_set;
> + u32 reserved;
> +};
> +
> +/**
> * struct vsp1_dl_body - Display list body
> * @list: entry in the display list list of bodies
> * @free: entry in the pool free body list
> @@ -95,9 +145,12 @@ struct vsp1_dl_body_pool {
> * @list: entry in the display list manager lists
> * @dlm: the display list manager
> * @header: display list header
> + * @extension: extended display list header. NULL for normal lists
> * @dma: DMA address for the header
> * @body0: first display list body
> * @bodies: list of extra display list bodies
> + * @pre_cmd: pre command to be issued through extended dl header
> + * @post_cmd: post command to be issued through extended dl header
> * @has_chain: if true, indicates that there's a partition chain
> * @chain: entry in the display list partition chain
> * @internal: whether the display list is used for internal purpose
> @@ -107,11 +160,15 @@ struct vsp1_dl_list {
> struct vsp1_dl_manager *dlm;
>
> struct vsp1_dl_header *header;
> + struct vsp1_dl_ext_header *extension;
> dma_addr_t dma;
>
> struct vsp1_dl_body *body0;
> struct list_head bodies;
>
> + struct vsp1_dl_ext_cmd *pre_cmd;
> + struct vsp1_dl_ext_cmd *post_cmd;
> +
> bool has_chain;
> struct list_head chain;
>
> @@ -495,6 +552,14 @@ int vsp1_dl_list_add_chain(struct vsp1_dl_list *head,
> return 0;
> }
>
> +static void vsp1_dl_ext_cmd_fill_header(struct vsp1_dl_ext_cmd *cmd)
> +{
> + cmd->cmds[0].opcode = cmd->opcode;
> + cmd->cmds[0].flags = cmd->flags;
> + cmd->cmds[0].address_set = cmd->data_dma;
> + cmd->cmds[0].reserved = 0;
> +}
> +
> static void vsp1_dl_list_fill_header(struct vsp1_dl_list *dl, bool is_last)
> {
> struct vsp1_dl_manager *dlm = dl->dlm;
> @@ -547,6 +612,27 @@ static void vsp1_dl_list_fill_header(struct
> vsp1_dl_list *dl, bool is_last) */
> dl->header->flags = VSP1_DLH_INT_ENABLE;
> }
> +
> + if (!dl->extension)
> + return;
> +
> + dl->extension->flags = 0;
> +
> + if (dl->pre_cmd) {
> + dl->extension->pre_ext_dl_plist = dl->pre_cmd->cmd_dma;
> + dl->extension->pre_ext_dl_num_cmd = dl->pre_cmd->num_cmds;
> + dl->extension->flags |= VSP1_DLH_EXT_PRE_CMD_EXEC;
> +
> + vsp1_dl_ext_cmd_fill_header(dl->pre_cmd);
> + }
> +
> + if (dl->post_cmd) {
> + dl->extension->post_ext_dl_plist = dl->post_cmd->cmd_dma;
> + dl->extension->post_ext_dl_num_cmd = dl->post_cmd->num_cmds;
> + dl->extension->flags |= VSP1_DLH_EXT_POST_CMD_EXEC;
> +
> + vsp1_dl_ext_cmd_fill_header(dl->post_cmd);
> + }
> }
>
> static bool vsp1_dl_list_hw_update_pending(struct vsp1_dl_manager *dlm)
> @@ -736,9 +822,16 @@ unsigned int vsp1_dlm_irq_frame_end(struct
> vsp1_dl_manager *dlm) /* Hardware Setup */
> void vsp1_dlm_setup(struct vsp1_device *vsp1)
> {
> + unsigned int i;
> u32 ctrl = (256 << VI6_DL_CTRL_AR_WAIT_SHIFT)
> | VI6_DL_CTRL_DC2 | VI6_DL_CTRL_DC1 | VI6_DL_CTRL_DC0
> | VI6_DL_CTRL_DLE;
> + u32 ext_dl = (0x02 << VI6_DL_EXT_CTRL_POLINT_SHIFT) |
> + VI6_DL_EXT_CTRL_DLPRI | VI6_DL_EXT_CTRL_EXT;
To match the style of the file, can you move the trailing | under the = ?
> +
> + if (vsp1_feature(vsp1, VSP1_HAS_EXT_DL))
> + for (i = 0; i < vsp1->info->wpf_count; ++i)
> + vsp1_write(vsp1, VI6_DL_EXT_CTRL(i), ext_dl);
And add {} to the if ?
With these small updates,
Reviewed-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
If there's no other issue with v5 that would require a v6, I'll fix this when
applying.
> vsp1_write(vsp1, VI6_DL_CTRL, ctrl);
> vsp1_write(vsp1, VI6_DL_SWAP, VI6_DL_SWAP_LWS);
> @@ -792,7 +885,11 @@ struct vsp1_dl_manager *vsp1_dlm_create(struct
> vsp1_device *vsp1, * memory. An extra body is allocated on top of the
> prealloc to account * for the cached body used by the vsp1_pipeline object.
> */
> - header_size = ALIGN(sizeof(struct vsp1_dl_header), 8);
> + header_size = vsp1_feature(vsp1, VSP1_HAS_EXT_DL) ?
> + sizeof(struct vsp1_dl_header_extended) :
> + sizeof(struct vsp1_dl_header);
> +
> + header_size = ALIGN(header_size, 8);
>
> dlm->pool = vsp1_dl_body_pool_create(vsp1, prealloc + 1,
> VSP1_DL_NUM_ENTRIES, header_size);
> @@ -808,6 +905,11 @@ struct vsp1_dl_manager *vsp1_dlm_create(struct
> vsp1_device *vsp1, return NULL;
> }
>
> + /* The extended header immediately follows the header. */
> + if (vsp1_feature(vsp1, VSP1_HAS_EXT_DL))
> + dl->extension = (void *)dl->header
> + + sizeof(*dl->header);
> +
> list_add_tail(&dl->list, &dlm->free);
> }
>
> diff --git a/drivers/media/platform/vsp1/vsp1_dl.h
> b/drivers/media/platform/vsp1/vsp1_dl.h index 7dba0469c92e..afefd5bfa136
> 100644
> --- a/drivers/media/platform/vsp1/vsp1_dl.h
> +++ b/drivers/media/platform/vsp1/vsp1_dl.h
> @@ -20,6 +20,31 @@ struct vsp1_dl_manager;
> #define VSP1_DL_FRAME_END_COMPLETED BIT(0)
> #define VSP1_DL_FRAME_END_INTERNAL BIT(1)
>
> +/**
> + * struct vsp1_dl_ext_cmd - Extended Display command
> + * @free: entry in the pool of free commands list
> + * @opcode: command type opcode
> + * @flags: flags used by the command
> + * @cmds: array of command bodies for this extended cmd
> + * @num_cmds: quantity of commands in @cmds array
> + * @cmd_dma: DMA address of the command body
> + * @data: memory allocation for command-specific data
> + * @data_dma: DMA address for command-specific data
> + */
> +struct vsp1_dl_ext_cmd {
> + struct list_head free;
> +
> + u8 opcode;
> + u32 flags;
> +
> + struct vsp1_pre_ext_dl_body *cmds;
> + unsigned int num_cmds;
> + dma_addr_t cmd_dma;
> +
> + void *data;
> + dma_addr_t data_dma;
> +};
> +
> void vsp1_dlm_setup(struct vsp1_device *vsp1);
>
> struct vsp1_dl_manager *vsp1_dlm_create(struct vsp1_device *vsp1,
> diff --git a/drivers/media/platform/vsp1/vsp1_drv.c
> b/drivers/media/platform/vsp1/vsp1_drv.c index 3367c2ba990d..b6619c9c18bb
> 100644
> --- a/drivers/media/platform/vsp1/vsp1_drv.c
> +++ b/drivers/media/platform/vsp1/vsp1_drv.c
> @@ -754,7 +754,7 @@ static const struct vsp1_device_info vsp1_device_infos[]
> = { .version = VI6_IP_VERSION_MODEL_VSPD_GEN3,
> .model = "VSP2-D",
> .gen = 3,
> - .features = VSP1_HAS_BRU | VSP1_HAS_WPF_VFLIP,
> + .features = VSP1_HAS_BRU | VSP1_HAS_WPF_VFLIP | VSP1_HAS_EXT_DL,
> .lif_count = 1,
> .rpf_count = 5,
> .uif_count = 1,
> @@ -774,7 +774,7 @@ static const struct vsp1_device_info vsp1_device_infos[]
> = { .version = VI6_IP_VERSION_MODEL_VSPDL_GEN3,
> .model = "VSP2-DL",
> .gen = 3,
> - .features = VSP1_HAS_BRS | VSP1_HAS_BRU,
> + .features = VSP1_HAS_BRS | VSP1_HAS_BRU | VSP1_HAS_EXT_DL,
> .lif_count = 2,
> .rpf_count = 5,
> .uif_count = 2,
> diff --git a/drivers/media/platform/vsp1/vsp1_regs.h
> b/drivers/media/platform/vsp1/vsp1_regs.h index 0d249ff9f564..5ea9f9070cf3
> 100644
> --- a/drivers/media/platform/vsp1/vsp1_regs.h
> +++ b/drivers/media/platform/vsp1/vsp1_regs.h
> @@ -72,7 +72,7 @@
> #define VI6_DL_SWAP_WDS (1 << 1)
> #define VI6_DL_SWAP_BTS (1 << 0)
>
> -#define VI6_DL_EXT_CTRL 0x011c
> +#define VI6_DL_EXT_CTRL(n) (0x011c + (n) * 36)
> #define VI6_DL_EXT_CTRL_NWE (1 << 16)
> #define VI6_DL_EXT_CTRL_POLINT_MASK (0x3f << 8)
> #define VI6_DL_EXT_CTRL_POLINT_SHIFT 8
--
Regards,
Laurent Pinchart
More information about the dri-devel
mailing list