[PATCH v5 10/11] media: vsp1: Support Interlaced display pipelines
Laurent Pinchart
laurent.pinchart at ideasonboard.com
Thu Aug 2 22:44:21 UTC 2018
Hi Kieran,
Thank you for the patch.
On Tuesday, 17 July 2018 23:35:52 EEST Kieran Bingham wrote:
> From: Kieran Bingham <kieran.bingham+renesas at ideasonboard.com>
>
> Calculate the top and bottom fields for the interlaced frames and
> utilise the extended display list command feature to implement the
> auto-field operations. This allows the DU to update the VSP2 registers
> dynamically based upon the currently processing field.
>
> Signed-off-by: Kieran Bingham <kieran.bingham+renesas at ideasonboard.com>
>
> ---
>
> v2:
> - fix erroneous BIT value which enabled interlaced
> - fix field handling at frame_end interrupt
>
> v3:
> - Pass DL through partition calls to allow autocmd's to be retrieved
> - Document interlaced field in struct vsp1_du_atomic_config
>
> v5:
> - Obtain autofld cmd in vsp1_rpf_configure_autofld()
> - Move VSP1_DL_EXT_AUTOFLD_INT to vsp1_regs.h
> - Rename VSP1_DL_EXT_AUTOFLD_INT -> VI6_DL_EXT_AUTOFLD_INT
> - move interlaced configuration parameter to pipe object
> - autofld: Set cmd->flags in one single expression.
>
> drivers/media/platform/vsp1/vsp1_dl.c | 10 ++++-
> drivers/media/platform/vsp1/vsp1_drm.c | 16 +++++-
> drivers/media/platform/vsp1/vsp1_pipe.h | 2 +-
> drivers/media/platform/vsp1/vsp1_regs.h | 3 +-
> drivers/media/platform/vsp1/vsp1_rpf.c | 72 ++++++++++++++++++++++++--
> include/media/vsp1.h | 2 +-
> 6 files changed, 100 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/media/platform/vsp1/vsp1_dl.c
> b/drivers/media/platform/vsp1/vsp1_dl.c index d5b3c24d160c..4963acac73f8
> 100644
> --- a/drivers/media/platform/vsp1/vsp1_dl.c
> +++ b/drivers/media/platform/vsp1/vsp1_dl.c
> @@ -946,6 +946,8 @@ void vsp1_dl_list_commit(struct vsp1_dl_list *dl, bool
> internal) */
> unsigned int vsp1_dlm_irq_frame_end(struct vsp1_dl_manager *dlm)
> {
> + struct vsp1_device *vsp1 = dlm->vsp1;
> + u32 status = vsp1_read(vsp1, VI6_STATUS);
> unsigned int flags = 0;
>
> spin_lock(&dlm->lock);
> @@ -971,6 +973,14 @@ unsigned int vsp1_dlm_irq_frame_end(struct
> vsp1_dl_manager *dlm) goto done;
>
> /*
> + * Progressive streams report only TOP fields. If we have a BOTTOM
> + * field, we are interlaced, and expect the frame to complete on the
> + * next frame end interrupt.
> + */
> + if (status & VI6_STATUS_FLD_STD(dlm->index))
> + goto done;
> +
> + /*
> * The device starts processing the queued display list right after the
> * frame end interrupt. The display list thus becomes active.
> */
> diff --git a/drivers/media/platform/vsp1/vsp1_drm.c
> b/drivers/media/platform/vsp1/vsp1_drm.c index a16856856789..efdc9a676728
> 100644
> --- a/drivers/media/platform/vsp1/vsp1_drm.c
> +++ b/drivers/media/platform/vsp1/vsp1_drm.c
> @@ -671,8 +671,20 @@ int vsp1_du_setup_lif(struct device *dev, unsigned int
> pipe_index, drm_pipe->width = cfg->width;
> drm_pipe->height = cfg->height;
>
> - dev_dbg(vsp1->dev, "%s: configuring LIF%u with format %ux%u\n",
> - __func__, pipe_index, cfg->width, cfg->height);
> + if (cfg->interlaced && !vsp1_feature(vsp1, VSP1_HAS_EXT_DL)) {
> + /*
> + * Interlaced support requires extended display lists to
> + * provide the auto-fld feature with the DU.
> + */
> + dev_dbg(vsp1->dev, "Interlaced unsupported on this pipeline\n");
> + return -EINVAL;
> + }
As mentioned in the v4 review, this check should be moved to the DRM driver,
in the atomic check handler.
> +
> + pipe->interlaced = cfg->interlaced;
> +
> + dev_dbg(vsp1->dev, "%s: configuring LIF%u with format %ux%u%s\n",
> + __func__, pipe_index, cfg->width, cfg->height,
> + pipe->interlaced ? "i" : "");
>
> mutex_lock(&vsp1->drm->lock);
>
> diff --git a/drivers/media/platform/vsp1/vsp1_pipe.h
> b/drivers/media/platform/vsp1/vsp1_pipe.h index 743d8f0db45c..ae646c9ef337
> 100644
> --- a/drivers/media/platform/vsp1/vsp1_pipe.h
> +++ b/drivers/media/platform/vsp1/vsp1_pipe.h
> @@ -104,6 +104,7 @@ struct vsp1_partition {
> * @entities: list of entities in the pipeline
> * @stream_config: cached stream configuration for video pipelines
> * @configured: when false the @stream_config shall be written to the
> hardware + * @interlaced: True when the pipeline is configured in
> interlaced mode * @partitions: The number of partitions used to process one
> frame * @partition: The current partition for configuration to process *
> @part_table: The pre-calculated partitions used by the pipeline @@ -142,6
> +143,7 @@ struct vsp1_pipeline {
>
> struct vsp1_dl_body *stream_config;
> bool configured;
> + bool interlaced;
>
> unsigned int partitions;
> struct vsp1_partition *partition;
> diff --git a/drivers/media/platform/vsp1/vsp1_regs.h
> b/drivers/media/platform/vsp1/vsp1_regs.h index 5ea9f9070cf3..3738ff2f7b85
> 100644
> --- a/drivers/media/platform/vsp1/vsp1_regs.h
> +++ b/drivers/media/platform/vsp1/vsp1_regs.h
> @@ -28,6 +28,7 @@
> #define VI6_SRESET_SRTS(n) (1 << (n))
>
> #define VI6_STATUS 0x0038
> +#define VI6_STATUS_FLD_STD(n) (1 << ((n) + 28))
> #define VI6_STATUS_SYS_ACT(n) (1 << ((n) + 8))
>
> #define VI6_WPF_IRQ_ENB(n) (0x0048 + (n) * 12)
> @@ -80,6 +81,8 @@
> #define VI6_DL_EXT_CTRL_EXPRI (1 << 4)
> #define VI6_DL_EXT_CTRL_EXT (1 << 0)
>
> +#define VI6_DL_EXT_AUTOFLD_INT BIT(0)
> +
> #define VI6_DL_BODY_SIZE 0x0120
> #define VI6_DL_BODY_SIZE_UPD (1 << 24)
> #define VI6_DL_BODY_SIZE_BS_MASK (0x1ffff << 0)
> diff --git a/drivers/media/platform/vsp1/vsp1_rpf.c
> b/drivers/media/platform/vsp1/vsp1_rpf.c index 69e5fe6e6b50..c728c193e09c
> 100644
> --- a/drivers/media/platform/vsp1/vsp1_rpf.c
> +++ b/drivers/media/platform/vsp1/vsp1_rpf.c
> @@ -20,6 +20,18 @@
> #define RPF_MAX_WIDTH 8190
> #define RPF_MAX_HEIGHT 8190
>
> +/* Pre extended display list command data structure. */
> +struct vsp1_extcmd_auto_fld_body {
> + u32 top_y0;
> + u32 bottom_y0;
> + u32 top_c0;
> + u32 bottom_c0;
> + u32 top_c1;
> + u32 bottom_c1;
> + u32 reserved0;
> + u32 reserved1;
> +};
> +
> /*
> ---------------------------------------------------------------------------
> -- * Device Access
> */
> @@ -64,6 +76,14 @@ static void rpf_configure_stream(struct vsp1_entity
> *entity, pstride |= format->plane_fmt[1].bytesperline
> << VI6_RPF_SRCM_PSTRIDE_C_SHIFT;
>
> + /*
> + * pstride has both STRIDE_Y and STRIDE_C, but multiplying the whole
> + * of pstride by 2 is conveniently OK here as we are multiplying both
> + * values.
> + */
> + if (pipe->interlaced)
> + pstride *= 2;
> +
> vsp1_rpf_write(rpf, dlb, VI6_RPF_SRCM_PSTRIDE, pstride);
>
> /* Format */
> @@ -100,6 +120,9 @@ static void rpf_configure_stream(struct vsp1_entity
> *entity, top = compose->top;
> }
>
> + if (pipe->interlaced)
> + top /= 2;
> +
> vsp1_rpf_write(rpf, dlb, VI6_RPF_LOC,
> (left << VI6_RPF_LOC_HCOORD_SHIFT) |
> (top << VI6_RPF_LOC_VCOORD_SHIFT));
> @@ -169,6 +192,36 @@ static void rpf_configure_stream(struct vsp1_entity
> *entity,
>
> }
>
> +static void vsp1_rpf_configure_autofld(struct vsp1_rwpf *rpf,
> + struct vsp1_dl_list *dl)
> +{
> + const struct v4l2_pix_format_mplane *format = &rpf->format;
> + struct vsp1_dl_ext_cmd *cmd;
> + struct vsp1_extcmd_auto_fld_body *auto_fld;
> + u32 offset_y, offset_c;
> +
> + cmd = vsp1_dl_get_pre_cmd(dl);
> + if (WARN_ONCE(!cmd, "Failed to obtain an autofld cmd"))
> + return;
> +
> + /* Re-index our auto_fld to match the current RPF. */
> + auto_fld = cmd->data;
> + auto_fld = &auto_fld[rpf->entity.index];
> +
> + auto_fld->top_y0 = rpf->mem.addr[0];
> + auto_fld->top_c0 = rpf->mem.addr[1];
> + auto_fld->top_c1 = rpf->mem.addr[2];
> +
> + offset_y = format->plane_fmt[0].bytesperline;
> + offset_c = format->plane_fmt[1].bytesperline;
> +
> + auto_fld->bottom_y0 = rpf->mem.addr[0] + offset_y;
> + auto_fld->bottom_c0 = rpf->mem.addr[1] + offset_c;
> + auto_fld->bottom_c1 = rpf->mem.addr[2] + offset_c;
> +
> + cmd->flags |= VI6_DL_EXT_AUTOFLD_INT | BIT(16 + rpf->entity.index);
> +}
> +
> static void rpf_configure_frame(struct vsp1_entity *entity,
> struct vsp1_pipeline *pipe,
> struct vsp1_dl_list *dl,
> @@ -221,6 +274,11 @@ static void rpf_configure_partition(struct vsp1_entity
> *entity, crop.left += pipe->partition->rpf.left;
> }
>
> + if (pipe->interlaced) {
> + crop.height = round_down(crop.height / 2, fmtinfo->vsub);
> + crop.top = round_down(crop.top / 2, fmtinfo->vsub);
> + }
> +
> vsp1_rpf_write(rpf, dlb, VI6_RPF_SRC_BSIZE,
> (crop.width << VI6_RPF_SRC_BSIZE_BHSIZE_SHIFT) |
> (crop.height << VI6_RPF_SRC_BSIZE_BVSIZE_SHIFT));
> @@ -249,9 +307,17 @@ static void rpf_configure_partition(struct vsp1_entity
> *entity, fmtinfo->swap_uv)
> swap(mem.addr[1], mem.addr[2]);
>
> - vsp1_rpf_write(rpf, dlb, VI6_RPF_SRCM_ADDR_Y, mem.addr[0]);
> - vsp1_rpf_write(rpf, dlb, VI6_RPF_SRCM_ADDR_C0, mem.addr[1]);
> - vsp1_rpf_write(rpf, dlb, VI6_RPF_SRCM_ADDR_C1, mem.addr[2]);
> + /*
> + * Interlaced pipelines will use the extended pre-cmd to process
> + * SRCM_ADDR_{Y,C0,C1}
> + */
> + if (pipe->interlaced) {
> + vsp1_rpf_configure_autofld(rpf, dl);
> + } else {
> + vsp1_rpf_write(rpf, dlb, VI6_RPF_SRCM_ADDR_Y, mem.addr[0]);
> + vsp1_rpf_write(rpf, dlb, VI6_RPF_SRCM_ADDR_C0, mem.addr[1]);
> + vsp1_rpf_write(rpf, dlb, VI6_RPF_SRCM_ADDR_C1, mem.addr[2]);
> + }
> }
>
> static void rpf_partition(struct vsp1_entity *entity,
> diff --git a/include/media/vsp1.h b/include/media/vsp1.h
> index 678c24de1ac6..3093b9cb9067 100644
> --- a/include/media/vsp1.h
> +++ b/include/media/vsp1.h
> @@ -25,6 +25,7 @@ int vsp1_du_init(struct device *dev);
> * struct vsp1_du_lif_config - VSP LIF configuration
> * @width: output frame width
> * @height: output frame height
> + * @interlaced: true for interlaced pipelines
> * @callback: frame completion callback function (optional). When a
> callback * is provided, the VSP driver guarantees that it will be
> called once * and only once for each vsp1_du_atomic_flush() call.
> @@ -33,6 +34,7 @@ int vsp1_du_init(struct device *dev);
> struct vsp1_du_lif_config {
> unsigned int width;
> unsigned int height;
> + bool interlaced;
>
> void (*callback)(void *data, bool completed, u32 crc);
> void *callback_data;
--
Regards,
Laurent Pinchart
More information about the dri-devel
mailing list