[PATCH 3/3] drm/tegra: sor: change io pad power state using new pmc api
Venkat Reddy Talla
vreddytalla at nvidia.com
Thu Aug 2 11:59:03 UTC 2018
Added support in PMC driver to configure the power state and voltage level
of the IO pads from client driver via pincontrol framework, because of this
tegra_io_pad_power_disable() and tegra_io_pad_power_enable() deprecated,
to change power state of SOR io pads using new pmc apis.
Signed-off-by: Venkat Reddy Talla <vreddytalla at nvidia.com>
---
drivers/gpu/drm/tegra/sor.c | 14 +++++---------
1 file changed, 5 insertions(+), 9 deletions(-)
diff --git a/drivers/gpu/drm/tegra/sor.c b/drivers/gpu/drm/tegra/sor.c
index d7fe9f1..6ede923 100644
--- a/drivers/gpu/drm/tegra/sor.c
+++ b/drivers/gpu/drm/tegra/sor.c
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2013 NVIDIA Corporation
+ * Copyright (C) 2013-2018, NVIDIA Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -342,7 +342,6 @@ struct tegra_sor {
struct drm_info_list *debugfs_files;
const struct tegra_sor_ops *ops;
- enum tegra_io_pad pad;
/* for HDMI 2.0 */
struct tegra_sor_hdmi_settings *settings;
@@ -1547,7 +1546,7 @@ static void tegra_sor_edp_disable(struct drm_encoder *encoder)
dev_err(sor->dev, "failed to disable DP: %d\n", err);
}
- err = tegra_io_pad_power_disable(sor->pad);
+ err = tegra_io_rail_power_off(TEGRA_IO_RAIL_LVDS);
if (err < 0)
dev_err(sor->dev, "failed to power off I/O pad: %d\n", err);
@@ -1707,7 +1706,7 @@ static void tegra_sor_edp_enable(struct drm_encoder *encoder)
tegra_sor_writel(sor, value, sor->soc->regs->dp_padctl0);
/* step 2 */
- err = tegra_io_pad_power_enable(sor->pad);
+ err = tegra_io_rail_power_on(TEGRA_IO_RAIL_LVDS);
if (err < 0)
dev_err(sor->dev, "failed to power on I/O pad: %d\n", err);
@@ -2189,7 +2188,7 @@ static void tegra_sor_hdmi_disable(struct drm_encoder *encoder)
if (err < 0)
dev_err(sor->dev, "failed to power down SOR: %d\n", err);
- err = tegra_io_pad_power_disable(sor->pad);
+ err = tegra_io_rail_power_off(TEGRA_IO_RAIL_HDMI);
if (err < 0)
dev_err(sor->dev, "failed to power off I/O pad: %d\n", err);
@@ -2225,7 +2224,7 @@ static void tegra_sor_hdmi_enable(struct drm_encoder *encoder)
div = clk_get_rate(sor->clk) / 1000000 * 4;
- err = tegra_io_pad_power_enable(sor->pad);
+ err = tegra_io_rail_power_on(TEGRA_IO_RAIL_HDMI);
if (err < 0)
dev_err(sor->dev, "failed to power on I/O pad: %d\n", err);
@@ -2921,7 +2920,6 @@ static int tegra_sor_parse_dt(struct tegra_sor *sor)
* override the default that we already set for Tegra210 and
* earlier
*/
- sor->pad = TEGRA_IO_PAD_HDMI_DP0 + sor->index;
}
return 0;
@@ -2962,7 +2960,6 @@ static int tegra_sor_probe(struct platform_device *pdev)
if (!sor->aux) {
if (sor->soc->supports_hdmi) {
sor->ops = &tegra_sor_hdmi_ops;
- sor->pad = TEGRA_IO_PAD_HDMI;
} else if (sor->soc->supports_lvds) {
dev_err(&pdev->dev, "LVDS not supported yet\n");
return -ENODEV;
@@ -2973,7 +2970,6 @@ static int tegra_sor_probe(struct platform_device *pdev)
} else {
if (sor->soc->supports_edp) {
sor->ops = &tegra_sor_edp_ops;
- sor->pad = TEGRA_IO_PAD_LVDS;
} else if (sor->soc->supports_dp) {
dev_err(&pdev->dev, "DisplayPort not supported yet\n");
return -ENODEV;
--
2.1.4
More information about the dri-devel
mailing list