[PATCH v2 3/5] drm/vc4: Use drm_atomic_helper_check_plane_state() to simplify the logic
Boris Brezillon
boris.brezillon at bootlin.com
Fri Aug 3 09:22:29 UTC 2018
drm_atomic_helper_check_plane_state() takes care of checking the
scaling capabilities and calculating the clipped X/Y offsets for us.
Rely on this function instead of open-coding the logic.
Incidentally, it seems to fix a problem we had with negative X/Y
positioning of YUV planes.
Signed-off-by: Boris Brezillon <boris.brezillon at bootlin.com>
---
Changes in v2:
- Grabbed authorship and dropped Eric's SoB
- Re-introduced vc4_state->crtc/src_x/y/w/h fields
---
drivers/gpu/drm/vc4/vc4_plane.c | 102 ++++++++++++++++++++--------------------
1 file changed, 52 insertions(+), 50 deletions(-)
diff --git a/drivers/gpu/drm/vc4/vc4_plane.c b/drivers/gpu/drm/vc4/vc4_plane.c
index a3275fa66b7b..269a5f46b35f 100644
--- a/drivers/gpu/drm/vc4/vc4_plane.c
+++ b/drivers/gpu/drm/vc4/vc4_plane.c
@@ -267,30 +267,59 @@ static int vc4_plane_setup_clipping_and_scaling(struct drm_plane_state *state)
u32 subpixel_src_mask = (1 << 16) - 1;
u32 format = fb->format->format;
int num_planes = fb->format->num_planes;
- u32 h_subsample = 1;
- u32 v_subsample = 1;
- int i;
+ int min_scale = 1, max_scale = INT_MAX;
+ struct drm_crtc_state *crtc_state;
+ u32 h_subsample, v_subsample;
+ int i, ret;
+
+ crtc_state = drm_atomic_get_existing_crtc_state(state->state,
+ state->crtc);
+ if (!crtc_state) {
+ DRM_DEBUG_KMS("Invalid crtc state\n");
+ return -EINVAL;
+ }
+
+ /* No configuring scaling on the cursor plane, since it gets
+ * non-vblank-synced updates, and scaling requires LBM changes which
+ * have to be vblank-synced.
+ */
+ if (plane->type == DRM_PLANE_TYPE_CURSOR) {
+ min_scale = DRM_PLANE_HELPER_NO_SCALING;
+ max_scale = DRM_PLANE_HELPER_NO_SCALING;
+ } else {
+ min_scale = 1;
+ max_scale = INT_MAX;
+ }
+
+ ret = drm_atomic_helper_check_plane_state(state, crtc_state,
+ min_scale, max_scale,
+ true, true);
+ if (ret)
+ return ret;
+
+ h_subsample = drm_format_horz_chroma_subsampling(format);
+ v_subsample = drm_format_vert_chroma_subsampling(format);
for (i = 0; i < num_planes; i++)
vc4_state->offsets[i] = bo->paddr + fb->offsets[i];
/* We don't support subpixel source positioning for scaling. */
- if ((state->src_x & subpixel_src_mask) ||
- (state->src_y & subpixel_src_mask) ||
- (state->src_w & subpixel_src_mask) ||
- (state->src_h & subpixel_src_mask)) {
+ if ((state->src.x1 & subpixel_src_mask) ||
+ (state->src.x2 & subpixel_src_mask) ||
+ (state->src.y1 & subpixel_src_mask) ||
+ (state->src.y2 & subpixel_src_mask)) {
return -EINVAL;
}
- vc4_state->src_x = state->src_x >> 16;
- vc4_state->src_y = state->src_y >> 16;
- vc4_state->src_w[0] = state->src_w >> 16;
- vc4_state->src_h[0] = state->src_h >> 16;
+ vc4_state->src_x = state->src.x1 >> 16;
+ vc4_state->src_y = state->src.y1 >> 16;
+ vc4_state->src_w[0] = (state->src.x2 - state->src.x1) >> 16;
+ vc4_state->src_h[0] = (state->src.y2 - state->src.y1) >> 16;
- vc4_state->crtc_x = state->crtc_x;
- vc4_state->crtc_y = state->crtc_y;
- vc4_state->crtc_w = state->crtc_w;
- vc4_state->crtc_h = state->crtc_h;
+ vc4_state->crtc_x = state->dst.x1;
+ vc4_state->crtc_y = state->dst.y1;
+ vc4_state->crtc_w = state->dst.x2 - state->dst.x1;
+ vc4_state->crtc_h = state->dst.y2 - state->dst.y1;
vc4_state->x_scaling[0] = vc4_get_scaling_mode(vc4_state->src_w[0],
vc4_state->crtc_w);
@@ -303,8 +332,6 @@ static int vc4_plane_setup_clipping_and_scaling(struct drm_plane_state *state)
if (num_planes > 1) {
vc4_state->is_yuv = true;
- h_subsample = drm_format_horz_chroma_subsampling(format);
- v_subsample = drm_format_vert_chroma_subsampling(format);
vc4_state->src_w[1] = vc4_state->src_w[0] / h_subsample;
vc4_state->src_h[1] = vc4_state->src_h[0] / v_subsample;
@@ -326,39 +353,14 @@ static int vc4_plane_setup_clipping_and_scaling(struct drm_plane_state *state)
vc4_state->y_scaling[1] = VC4_SCALING_NONE;
}
- /* No configuring scaling on the cursor plane, since it gets
- non-vblank-synced updates, and scaling requires requires
- LBM changes which have to be vblank-synced.
- */
- if (plane->type == DRM_PLANE_TYPE_CURSOR && !vc4_state->is_unity)
- return -EINVAL;
-
- /* Clamp the on-screen start x/y to 0. The hardware doesn't
- * support negative y, and negative x wastes bandwidth.
- */
- if (vc4_state->crtc_x < 0) {
- for (i = 0; i < num_planes; i++) {
- u32 cpp = fb->format->cpp[i];
- u32 subs = ((i == 0) ? 1 : h_subsample);
-
- vc4_state->offsets[i] += (cpp *
- (-vc4_state->crtc_x) / subs);
- }
- vc4_state->src_w[0] += vc4_state->crtc_x;
- vc4_state->src_w[1] += vc4_state->crtc_x / h_subsample;
- vc4_state->crtc_x = 0;
- }
-
- if (vc4_state->crtc_y < 0) {
- for (i = 0; i < num_planes; i++) {
- u32 subs = ((i == 0) ? 1 : v_subsample);
-
- vc4_state->offsets[i] += (fb->pitches[i] *
- (-vc4_state->crtc_y) / subs);
- }
- vc4_state->src_h[0] += vc4_state->crtc_y;
- vc4_state->src_h[1] += vc4_state->crtc_y / v_subsample;
- vc4_state->crtc_y = 0;
+ /* Adjust the base pointer to the first pixel to be scanned out. */
+ for (i = 0; i < num_planes; i++) {
+ vc4_state->offsets[i] += (vc4_state->src_y /
+ (i ? v_subsample : 1)) *
+ fb->pitches[i];
+ vc4_state->offsets[i] += (vc4_state->src_x /
+ (i ? h_subsample : 1)) *
+ fb->format->cpp[i];
}
return 0;
--
2.14.1
More information about the dri-devel
mailing list