[PATCH v2 10/21] drm/omap: panel-tpo-td043mtea1: Convert to the GPIO descriptors API

Laurent Pinchart laurent.pinchart at ideasonboard.com
Mon Aug 6 20:23:04 UTC 2018


The GPIO descriptor API is favoured over the plain GPIO API for consumer
drivers. Using it simplifies the driver code.

As the descriptor API handles the active-low flag internally we need to
invert the polarity of all GPIO operations in the driver. Rename the
nreset_gpio field to reset_gpio to reflect that.

The reset GPIO is mandatory, so drop conditional tests through the
driver.

Signed-off-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel at collabora.co.uk>
---
 .../drm/omapdrm/displays/panel-tpo-td043mtea1.c    | 52 ++++++----------------
 1 file changed, 14 insertions(+), 38 deletions(-)

diff --git a/drivers/gpu/drm/omapdrm/displays/panel-tpo-td043mtea1.c b/drivers/gpu/drm/omapdrm/displays/panel-tpo-td043mtea1.c
index 34531169c166..1521812ab15b 100644
--- a/drivers/gpu/drm/omapdrm/displays/panel-tpo-td043mtea1.c
+++ b/drivers/gpu/drm/omapdrm/displays/panel-tpo-td043mtea1.c
@@ -10,14 +10,13 @@
  * (at your option) any later version.
  */
 
-#include <linux/module.h>
 #include <linux/delay.h>
-#include <linux/spi/spi.h>
-#include <linux/regulator/consumer.h>
-#include <linux/gpio/consumer.h>
 #include <linux/err.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/regulator/consumer.h>
 #include <linux/slab.h>
-#include <linux/of_gpio.h>
+#include <linux/spi/spi.h>
 
 #include "../dss/omapdss.h"
 
@@ -59,7 +58,7 @@ struct panel_drv_data {
 
 	struct spi_device *spi;
 	struct regulator *vcc_reg;
-	int nreset_gpio;
+	struct gpio_desc *reset_gpio;
 	u16 gamma[12];
 	u32 mode;
 	u32 vmirror:1;
@@ -282,8 +281,7 @@ static int tpo_td043_power_on(struct panel_drv_data *ddata)
 	/* wait for panel to stabilize */
 	msleep(160);
 
-	if (gpio_is_valid(ddata->nreset_gpio))
-		gpio_set_value(ddata->nreset_gpio, 1);
+	gpiod_set_value(ddata->reset_gpio, 0);
 
 	tpo_td043_write(ddata->spi, 2,
 			TPO_R02_MODE(ddata->mode) | TPO_R02_NCLK_RISING);
@@ -305,8 +303,7 @@ static void tpo_td043_power_off(struct panel_drv_data *ddata)
 	tpo_td043_write(ddata->spi, 3,
 			TPO_R03_VAL_STANDBY | TPO_R03_EN_PWM);
 
-	if (gpio_is_valid(ddata->nreset_gpio))
-		gpio_set_value(ddata->nreset_gpio, 0);
+	gpiod_set_value(ddata->reset_gpio, 1);
 
 	/* wait for at least 2 vsyncs before cutting off power */
 	msleep(50);
@@ -419,26 +416,11 @@ static const struct omap_dss_driver tpo_td043_ops = {
 	.check_timings	= tpo_td043_check_timings,
 };
 
-static int tpo_td043_probe_of(struct spi_device *spi)
-{
-	struct device_node *node = spi->dev.of_node;
-	struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
-	int gpio;
-
-	gpio = of_get_named_gpio(node, "reset-gpios", 0);
-	if (!gpio_is_valid(gpio)) {
-		dev_err(&spi->dev, "failed to parse enable gpio\n");
-		return gpio;
-	}
-	ddata->nreset_gpio = gpio;
-
-	return 0;
-}
-
 static int tpo_td043_probe(struct spi_device *spi)
 {
 	struct panel_drv_data *ddata;
 	struct omap_dss_device *dssdev;
+	struct gpio_desc *gpio;
 	int r;
 
 	dev_dbg(&spi->dev, "%s\n", __func__);
@@ -460,10 +442,6 @@ static int tpo_td043_probe(struct spi_device *spi)
 
 	ddata->spi = spi;
 
-	r = tpo_td043_probe_of(spi);
-	if (r)
-		return r;
-
 	ddata->mode = TPO_R02_MODE_800x480;
 	memcpy(ddata->gamma, tpo_td043_def_gamma, sizeof(ddata->gamma));
 
@@ -473,16 +451,14 @@ static int tpo_td043_probe(struct spi_device *spi)
 		return PTR_ERR(ddata->vcc_reg);
 	}
 
-	if (gpio_is_valid(ddata->nreset_gpio)) {
-		r = devm_gpio_request_one(&spi->dev,
-				ddata->nreset_gpio, GPIOF_OUT_INIT_LOW,
-				"lcd reset");
-		if (r < 0) {
-			dev_err(&spi->dev, "couldn't request reset GPIO\n");
-			return r;
-		}
+	gpio = devm_gpiod_get(&spi->dev, "reset", GPIOD_OUT_HIGH);
+	if (IS_ERR(gpio)) {
+		dev_err(&spi->dev, "failed to get reset gpio\n");
+		return PTR_ERR(gpio);
 	}
 
+	ddata->reset_gpio = gpio;
+
 	r = sysfs_create_group(&spi->dev.kobj, &tpo_td043_attr_group);
 	if (r) {
 		dev_err(&spi->dev, "failed to create sysfs files\n");
-- 
Regards,

Laurent Pinchart



More information about the dri-devel mailing list