[PATCH V4 0/8] backlight: qcom-wled: Support for QCOM wled driver

[kgunda at codeaurora.org]

On 2018-08-03 13:15, Daniel Thompson wrote:
> On Fri, Aug 03, 2018 at 12:49:34PM +0530, kgunda at codeaurora.org wrote:
>> Hi Bjorn,
>> Can you please help review this patch series ?
>> 
>> Pavel, Rob, Daniel reviewed the series except the "auto string 
>> detection"
>> patch.
> 
> I did take a glance at the last patch... but in the end decided to wait
> for v5 to look in depth.
> 
> 
> Daniel.
> 
> 
>> 
Thanks Daniel! I will push the V5 series then.

>> Thanks,
>> Kiran
>> 
>> On 2018-07-09 15:52, Kiran Gunda wrote:
>> > This patch series renames the pm8941-wled.c driver to qcom-wled.c to add
>> > the support for multiple PMICs supported by qualcomm. This patch series
>> > supports both PM8941 and PMI8998 WLED. The PMI8998 WLED has the support
>> > to handle the OVP (over voltage protection) and the SC (short circuit
>> > protection)
>> > interrupts. It also has the auto string detection algorithm support to
>> > configure the right strings if the user specified string configuration
>> > is in-correct. These three features are added in this series for
>> > PMI8998.
>> >
>> > changes from v1:
>> >    - Fixed the commit message for
>> >    - backlight: qcom-wled: Rename pm8941-wled.c to qcom-wled.c
>> >
>> > Changes from v2:
>> >    - Fixed bjorn and other reviewer's comments
>> >    - Seperated the device tree bindings
>> >    - Splitted out the WLED4 changes in seperate patch
>> >    - Merged OVP and auto string detection patch
>> >
>> > Changes from v3:
>> >   - Added Reviewed-by/Acked-by tags
>> >   - Fixed comments from Bjorn/Vinod/Rob
>> >   - Splitting the "backlight: qcom-wled: Add support for WLED4
>> > peripheral" patch
>> >     to seperate the WLED3 specific restructure.
>> >
>> > Kiran Gunda (8):
>> >   backlight: qcom-wled: Rename pm8941-wled.c to qcom-wled.c
>> >   backlight: qcom-wled: restructure the qcom-wled bindings
>> >   backlight: qcom-wled: Add new properties for PMI8998
>> >   backlight: qcom-wled: Rename PM8941* to WLED3
>> >   backlight: qcom-wled: Restructure the driver for WLED3
>> >   backlight: qcom-wled: Add support for WLED4 peripheral
>> >   backlight: qcom-wled: add support for short circuit handling
>> >   backlight: qcom-wled: Add auto string detection logic
>> >
>> >  .../bindings/leds/backlight/pm8941-wled.txt        |   42 -
>> >  .../bindings/leds/backlight/qcom-wled.txt          |  150 +++
>> >  drivers/video/backlight/Kconfig                    |    8 +-
>> >  drivers/video/backlight/Makefile                   |    2 +-
>> >  drivers/video/backlight/pm8941-wled.c              |  432 -------
>> >  drivers/video/backlight/qcom-wled.c                | 1298
>> > ++++++++++++++++++++
>> >  6 files changed, 1453 insertions(+), 479 deletions(-)
>> >  delete mode 100644
>> > Documentation/devicetree/bindings/leds/backlight/pm8941-wled.txt
>> >  create mode 100644
>> > Documentation/devicetree/bindings/leds/backlight/qcom-wled.txt
>> >  delete mode 100644 drivers/video/backlight/pm8941-wled.c
>> >  create mode 100644 drivers/video/backlight/qcom-wled.c
> --
> To unsubscribe from this list: send the line "unsubscribe 
> linux-arm-msm" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html