[PATCH v3 07/13] drm/msm/dpu: avoid querying for hw intf before assignment
Jeykumar Sankaran
jsanka at codeaurora.org
Wed Aug 8 03:12:34 UTC 2018
hw intf blocks are needed only during encoder enable to program
timing engines(for video panels). encoder->enable is triggered
only after atomic_modeset at which point we assign the
resources for the display pipeline. This patch defers the
hw_intf look-up until encoder enable.
changes in v2:
- none
changes in v3:
- none
Change-Id: Ib0a2253431468151355e50cbad7b91e2b77b6e54
Signed-off-by: Jeykumar Sankaran <jsanka at codeaurora.org>
---
.../gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c | 53 +++++++---------------
1 file changed, 16 insertions(+), 37 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c
index c0221cc..a0b3744 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c
@@ -462,7 +462,7 @@ static void dpu_encoder_phys_vid_enable(struct dpu_encoder_phys *phys_enc)
{
struct msm_drm_private *priv;
struct dpu_encoder_phys_vid *vid_enc;
- struct dpu_hw_intf *intf;
+ struct dpu_rm_hw_iter iter;
struct dpu_hw_ctl *ctl;
u32 flush_mask = 0;
@@ -474,11 +474,20 @@ static void dpu_encoder_phys_vid_enable(struct dpu_encoder_phys *phys_enc)
priv = phys_enc->parent->dev->dev_private;
vid_enc = to_dpu_encoder_phys_vid(phys_enc);
- intf = vid_enc->hw_intf;
ctl = phys_enc->hw_ctl;
- if (!vid_enc->hw_intf || !phys_enc->hw_ctl) {
- DPU_ERROR("invalid hw_intf %d hw_ctl %d\n",
- vid_enc->hw_intf != 0, phys_enc->hw_ctl != 0);
+
+ dpu_rm_init_hw_iter(&iter, phys_enc->parent->base.id, DPU_HW_BLK_INTF);
+ while (dpu_rm_get_hw(&phys_enc->dpu_kms->rm, &iter)) {
+ struct dpu_hw_intf *hw_intf = (struct dpu_hw_intf *)iter.hw;
+
+ if (hw_intf->idx == phys_enc->intf_idx) {
+ vid_enc->hw_intf = hw_intf;
+ break;
+ }
+ }
+
+ if (!vid_enc->hw_intf) {
+ DPU_ERROR("hw_intf not assigned\n");
return;
}
@@ -500,7 +509,7 @@ static void dpu_encoder_phys_vid_enable(struct dpu_encoder_phys *phys_enc)
!dpu_encoder_phys_vid_is_master(phys_enc))
goto skip_flush;
- ctl->ops.get_bitmask_intf(ctl, &flush_mask, intf->idx);
+ ctl->ops.get_bitmask_intf(ctl, &flush_mask, vid_enc->hw_intf->idx);
ctl->ops.update_pending_flush(ctl, flush_mask);
skip_flush:
@@ -531,22 +540,13 @@ static void dpu_encoder_phys_vid_get_hw_resources(
struct dpu_encoder_hw_resources *hw_res,
struct drm_connector_state *conn_state)
{
- struct dpu_encoder_phys_vid *vid_enc;
-
if (!phys_enc || !hw_res) {
DPU_ERROR("invalid arg(s), enc %d hw_res %d conn_state %d\n",
phys_enc != 0, hw_res != 0, conn_state != 0);
return;
}
- vid_enc = to_dpu_encoder_phys_vid(phys_enc);
- if (!vid_enc->hw_intf) {
- DPU_ERROR("invalid arg(s), hw_intf\n");
- return;
- }
-
- DPU_DEBUG_VIDENC(vid_enc, "\n");
- hw_res->intfs[vid_enc->hw_intf->idx - INTF_0] = INTF_MODE_VIDEO;
+ hw_res->intfs[phys_enc->intf_idx - INTF_0] = INTF_MODE_VIDEO;
}
static int _dpu_encoder_phys_vid_wait_for_vblank(
@@ -809,7 +809,6 @@ struct dpu_encoder_phys *dpu_encoder_phys_vid_init(
{
struct dpu_encoder_phys *phys_enc = NULL;
struct dpu_encoder_phys_vid *vid_enc = NULL;
- struct dpu_rm_hw_iter iter;
struct dpu_encoder_irq *irq;
int i, ret = 0;
@@ -829,26 +828,6 @@ struct dpu_encoder_phys *dpu_encoder_phys_vid_init(
phys_enc->hw_mdptop = p->dpu_kms->hw_mdp;
phys_enc->intf_idx = p->intf_idx;
- /**
- * hw_intf resource permanently assigned to this encoder
- * Other resources allocated at atomic commit time by use case
- */
- dpu_rm_init_hw_iter(&iter, 0, DPU_HW_BLK_INTF);
- while (dpu_rm_get_hw(&p->dpu_kms->rm, &iter)) {
- struct dpu_hw_intf *hw_intf = (struct dpu_hw_intf *)iter.hw;
-
- if (hw_intf->idx == p->intf_idx) {
- vid_enc->hw_intf = hw_intf;
- break;
- }
- }
-
- if (!vid_enc->hw_intf) {
- ret = -EINVAL;
- DPU_ERROR("failed to get hw_intf\n");
- goto fail;
- }
-
DPU_DEBUG_VIDENC(vid_enc, "\n");
dpu_encoder_phys_vid_init_ops(&phys_enc->ops);
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
More information about the dri-devel
mailing list