[PATCH v4 12/14] drm/mediatek: use layer_nr function to get layer number to init plane

[CK Hu]

Hi, Stu:

On Thu, 2018-08-09 at 10:15 +0800, Stu Hsieh wrote:
> This patch use layer_nr function to get layer number to init plane
> 
> When plane init in crtc create,
> it use the number of OVL layer to init plane.
> That's OVL can read 4 memory address.
> 
> For mt2712 third ddp, it use RDMA to read memory.
> RDMA can read 1 memory address, so it just init one plane.
> 
> For compatibility, this patch use mtk_ddp_comp_layer_nr function
> to get layer number from their HW component in ddp for plane init.
> 
> Signed-off-by: Stu Hsieh <stu.hsieh at mediatek.com>

Reviewed-by: CK Hu <ck.hu at mediatek.com>

> ---
>  drivers/gpu/drm/mediatek/mtk_drm_crtc.c | 21 ++++++++++++++-------
>  drivers/gpu/drm/mediatek/mtk_drm_crtc.h |  1 -
>  2 files changed, 14 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
> index 2d6aa150a9ff..845d1608465e 100644
> --- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
> +++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
> @@ -45,7 +45,8 @@ struct mtk_drm_crtc {
>  	bool				pending_needs_vblank;
>  	struct drm_pending_vblank_event	*event;
>  
> -	struct drm_plane		planes[OVL_LAYER_NR];
> +	struct drm_plane		*planes;
> +	unsigned int			layer_nr;
>  	bool				pending_planes;
>  
>  	void __iomem			*config_regs;
> @@ -286,7 +287,7 @@ static int mtk_crtc_ddp_hw_init(struct mtk_drm_crtc *mtk_crtc)
>  	}
>  
>  	/* Initially configure all planes */
> -	for (i = 0; i < OVL_LAYER_NR; i++) {
> +	for (i = 0; i < mtk_crtc->layer_nr; i++) {
>  		struct drm_plane *plane = &mtk_crtc->planes[i];
>  		struct mtk_plane_state *plane_state;
>  
> @@ -351,7 +352,7 @@ static void mtk_crtc_ddp_config(struct drm_crtc *crtc)
>  	}
>  
>  	if (mtk_crtc->pending_planes) {
> -		for (i = 0; i < OVL_LAYER_NR; i++) {
> +		for (i = 0; i < mtk_crtc->layer_nr; i++) {
>  			struct drm_plane *plane = &mtk_crtc->planes[i];
>  			struct mtk_plane_state *plane_state;
>  
> @@ -403,7 +404,7 @@ static void mtk_drm_crtc_atomic_disable(struct drm_crtc *crtc,
>  		return;
>  
>  	/* Set all pending plane state to disabled */
> -	for (i = 0; i < OVL_LAYER_NR; i++) {
> +	for (i = 0; i < mtk_crtc->layer_nr; i++) {
>  		struct drm_plane *plane = &mtk_crtc->planes[i];
>  		struct mtk_plane_state *plane_state;
>  
> @@ -450,7 +451,7 @@ static void mtk_drm_crtc_atomic_flush(struct drm_crtc *crtc,
>  
>  	if (mtk_crtc->event)
>  		mtk_crtc->pending_needs_vblank = true;
> -	for (i = 0; i < OVL_LAYER_NR; i++) {
> +	for (i = 0; i < mtk_crtc->layer_nr; i++) {
>  		struct drm_plane *plane = &mtk_crtc->planes[i];
>  		struct mtk_plane_state *plane_state;
>  
> @@ -598,7 +599,12 @@ int mtk_drm_crtc_create(struct drm_device *drm_dev,
>  		mtk_crtc->ddp_comp[i] = comp;
>  	}
>  
> -	for (zpos = 0; zpos < OVL_LAYER_NR; zpos++) {
> +	mtk_crtc->layer_nr = mtk_ddp_comp_layer_nr(mtk_crtc->ddp_comp[0]);
> +	mtk_crtc->planes = devm_kzalloc(dev, mtk_crtc->layer_nr *
> +					sizeof(struct drm_plane),
> +					GFP_KERNEL);
> +
> +	for (zpos = 0; zpos < mtk_crtc->layer_nr; zpos++) {
>  		type = (zpos == 0) ? DRM_PLANE_TYPE_PRIMARY :
>  				(zpos == 1) ? DRM_PLANE_TYPE_CURSOR :
>  						DRM_PLANE_TYPE_OVERLAY;
> @@ -609,7 +615,8 @@ int mtk_drm_crtc_create(struct drm_device *drm_dev,
>  	}
>  
>  	ret = mtk_drm_crtc_init(drm_dev, mtk_crtc, &mtk_crtc->planes[0],
> -				&mtk_crtc->planes[1], pipe);
> +				mtk_crtc->layer_nr > 1 ? &mtk_crtc->planes[1] :
> +				NULL, pipe);
>  	if (ret < 0)
>  		goto unprepare;
>  	drm_mode_crtc_set_gamma_size(&mtk_crtc->base, MTK_LUT_SIZE);
> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.h b/drivers/gpu/drm/mediatek/mtk_drm_crtc.h
> index 9d9410c67ae9..60bcc8aba8e3 100644
> --- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.h
> +++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.h
> @@ -18,7 +18,6 @@
>  #include "mtk_drm_ddp_comp.h"
>  #include "mtk_drm_plane.h"
>  
> -#define OVL_LAYER_NR	4
>  #define MTK_LUT_SIZE	512
>  #define MTK_MAX_BPC	10
>  #define MTK_MIN_BPC	3