[PATCH 2/2] arm64: dts: sdm845: Add gpu and gmu device nodes
Robin Murphy
robin.murphy at arm.com
Thu Aug 9 09:46:00 UTC 2018
On 08/08/18 23:47, Jordan Crouse wrote:
> Add the nodes to describe the Adreno GPU and GMU devices.
>
> Signed-off-by: Jordan Crouse <jcrouse at codeaurora.org>
> ---
> arch/arm64/boot/dts/qcom/sdm845.dtsi | 121 +++++++++++++++++++++++++++
> 1 file changed, 121 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> index cdaabeb3c995..9fb90bb4ea1f 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> @@ -323,5 +323,126 @@
> status = "disabled";
> };
> };
> +
> + adreno_smmu: arm,smmu-adreno at 5040000 {
> + compatible = "qcom,msm8996-smmu-v2";
Per the binding, this should be:
compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
(note that even with Vivek's series the driver won't actually match the
SoC-specific string until we find a real need to)
> + reg = <0x5040000 0x10000>;
> + #iommu-cells = <1>;
> + #global-interrupts = <2>;
Indentation?
> + interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,
And here?
Otherwise, assuming the table walk really isn't cache-coherent, and the
global and CB interrupts really do have different triggers (yuck :P),
the SMMU parts look fine to me.
Robin.
> + <GIC_SPI 364 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 365 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 366 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 367 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 368 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 369 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 370 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 371 IRQ_TYPE_EDGE_RISING>;
> + clocks = <&clock_gcc GCC_GPU_MEMNOC_GFX_CLK>,
> + <&clock_gcc GCC_GPU_CFG_AHB_CLK>;
> + clock-names = "bus", "iface";
> +
> + power-domains = <&clock_gpucc GPU_CX_GDSC>;
> + };
> +
> + gpu_opp_table: adreno-opp-table {
> + compatible = "operating-points-v2";
> +
> + opp-710000000 {
> + opp-hz = /bits/ 64 <710000000>;
> + qcom,level = <416>;
> + };
> +
> + opp-675000000 {
> + opp-hz = /bits/ 64 <675000000>;
> + qcom,level = <384>;
> + };
> +
> + opp-596000000 {
> + opp-hz = /bits/ 64 <596000000>;
> + qcom,level = <320>;
> + };
> +
> + opp-520000000 {
> + opp-hz = /bits/ 64 <520000000>;
> + qcom,level = <256>;
> + };
> +
> + opp-414000000 {
> + opp-hz = /bits/ 64 <414000000>;
> + qcom,level = <192>;
> + };
> +
> + opp-342000000 {
> + opp-hz = /bits/ 64 <342000000>;
> + qcom,level = <128>;
> + };
> +
> + opp-257000000 {
> + opp-hz = /bits/ 64 <257000000>;
> + qcom,level = <64>;
> + };
> + };
> +
> + gpu at 5000000 {
> + compatible = "qcom,adreno-630.2", "qcom,adreno";
> + #stream-id-cells = <16>;
> +
> + reg = <0x5000000 0x40000>;
> + reg-names = "kgsl_3d0_reg_memory";
> +
> + /*
> + * Look ma, no clocks! The GPU clocks and power are
> + * controlled entirely by the GMU
> + */
> +
> + interrupts = <0 300 0>;
> + interrupt-names = "kgsl_3d0_irq";
> +
> + iommus = <&adreno_smmu 0>;
> +
> + operating-points-v2 = <&gpu_opp_table>;
> +
> + qcom,gmu = <&gmu>;
> + };
> +
> + gmu_opp_table: adreno-gmu-opp-table {
> + compatible = "operating-points-v2";
> +
> + opp-400000000 {
> + opp-hz = /bits/ 64 <400000000>;
> + qcom,level = <128>;
> + };
> +
> + opp-200000000 {
> + opp-hz = /bits/ 64 <200000000>;
> + qcom,level = <48>;
> + };
> + };
> +
> + gmu: gmu at 506a000 {
> + compatible="qcom,adreno-gmu";
> +
> + reg = <0x506a000 0x30000>,
> + <0xb280000 0x10000>,
> + <0xb480000 0x10000>;
> + reg-names = "gmu", "gmu_pdc", "gmu_pdc_seq";
> +
> + interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "hfi", "gmu";
> +
> + clocks = <&clock_gpucc GPU_CC_CX_GMU_CLK>,
> + <&clock_gpucc GPU_CC_CXO_CLK>,
> + <&gcc GCC_DDRSS_GPU_AXI_CLK>,
> + <&gcc GCC_GPU_MEMNOC_GFX_CLK>;
> + clock-names = "gmu", "cxo", "axi", "memnoc";
> +
> + power-domains = <&clock_gpucc GPU_CX_GDSC>;
> + iommus = <&adreno_smmu 5>;
> +
> + operating-points-v2 = <&gmu_opp_table>;
> + };
> };
> };
>
More information about the dri-devel
mailing list