[PROTO][PATCH 00/10] R-Car D3 LVDS/HDMI support (with PLL)
Ulrich Hecht
uli+renesas at fpond.eu
Tue Aug 14 13:49:54 UTC 2018
Hi!
This is a prototype extension of the series "R-Car D3 LVDS/HDMI support"
that includes an up-port of the LVDS PLL support in the BSP.
While this is prototype-quality code, there are in my judgment no serious
hacks in it. The most significant deviation in behavior between this and
the BSP code is that the LVDS PLL setup is not done in two steps, but in one
go as the LVDS device is enabled. This was easier to implement, and works
just as fine.
Instructions for testing this are found at
https://elinux.org/User:Uli/D3_HDMI_Test, including links to git trees based
on renesas-drivers and drm-next, as well as config files for each.
CU
Uli
Jacopo Mondi (1):
drm: rcar-du: lvds: Handle LVDS interface reset
Kieran Bingham (1):
arm64: dts: renesas: r8a77995: Add LVDS support
Koji Matsuoka (5):
drm: rcar-du: Add clk_set_rate for external clock device
drm: rcar-du: Fix digital RGB routing for R8A77995
drm/bridge: adv7511: Add max-clock, min-vrefresh options
drm: rcar-du: Fix procedure for extal and dotclkin selection
arm64: dts: r8a77995-draak: set external clock for DU
Ulrich Hecht (3):
drm: rcar-du: Add r8a77995 device support
drm: rcar-du: lvds: LVDS PLL support
arm64: dts: renesas: r8a77995-draak: add HDMI output
arch/arm64/boot/dts/renesas/r8a77995-draak.dts | 92 +++++++++-
arch/arm64/boot/dts/renesas/r8a77995.dtsi | 56 ++++++
drivers/gpu/drm/bridge/adv7511/adv7511.h | 7 +
drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 22 +++
drivers/gpu/drm/rcar-du/rcar_du_crtc.c | 33 ++--
drivers/gpu/drm/rcar-du/rcar_du_crtc.h | 4 +
drivers/gpu/drm/rcar-du/rcar_du_drv.c | 28 +++
drivers/gpu/drm/rcar-du/rcar_du_drv.h | 4 +
drivers/gpu/drm/rcar-du/rcar_du_group.c | 18 +-
drivers/gpu/drm/rcar-du/rcar_lvds.c | 227 +++++++++++++++++++++++++
drivers/gpu/drm/rcar-du/rcar_lvds_regs.h | 44 ++++-
11 files changed, 517 insertions(+), 18 deletions(-)
--
2.7.4
More information about the dri-devel
mailing list