[PATCH 2/2] drm/vkms: Compute CRC with Cursor Plane
Haneen Mohammed
hamohammed.sa at gmail.com
Tue Aug 14 19:19:10 UTC 2018
On Tue, Aug 14, 2018 at 09:52:33PM +0200, Daniel Vetter wrote:
> On Tue, Aug 14, 2018 at 9:03 PM, Haneen Mohammed
> <hamohammed.sa at gmail.com> wrote:
> > On Tue, Aug 14, 2018 at 10:21:29AM +0200, Daniel Vetter wrote:
> >> On Mon, Aug 13, 2018 at 11:04:11PM +0300, Haneen Mohammed wrote:
> >> > On Wed, Aug 08, 2018 at 10:23:27AM +0200, Daniel Vetter wrote:
> >> > > On Wed, Aug 08, 2018 at 06:53:17AM +0300, Haneen Mohammed wrote:
> >> > > > On Tue, Aug 07, 2018 at 06:33:36PM +0200, Daniel Vetter wrote:
> >> > > > > On Mon, Aug 06, 2018 at 06:58:29AM +0300, Haneen Mohammed wrote:
> >> > > > > > This patch compute CRC for output frame with cursor and primary plane.
> >> > > > > > Blend cursor with primary plane and compute CRC on the resulted frame.
> >> > > > > >
> >> > > > > > Signed-off-by: Haneen Mohammed <hamohammed.sa at gmail.com>
> >> > > > >
> >> > > > > Nice!
> >> > > > >
> >> > > > > I assume with this you're passing all the crc based cursor tests in igt?
> >> > > > > If so, please mention this in the commit message, so that there's a record
> >> > > > > of the testing done on this.
> >> > > > >
> >> > > >
> >> > > > Sure, I'll update the commit message.
> >> > > > Is there any other change I should add/fix to this patchset?
> >> > > >
> >> > > > > One fairly huge gap we iirc have in our cursor testing is that there's not
> >> > > > > much (if any?) alpha blending coverage. We kinda need that to make sure
> >> > > > > this all works correctly. The usual trick is to only check the extreme
> >> > > > > alpha values, i.e. fully opaque and fully transparent, since intermediate
> >> > > > > values are affected by hw-specific rounding modes.
> >> > > > > > ---
> >> > > > > > drivers/gpu/drm/vkms/vkms_crc.c | 149 +++++++++++++++++++++++++-----
> >> > > > > > drivers/gpu/drm/vkms/vkms_drv.h | 5 +-
> >> > > > > > drivers/gpu/drm/vkms/vkms_plane.c | 10 +-
> >> > > > > > 3 files changed, 137 insertions(+), 27 deletions(-)
> >> > > > > >
> >> > > > > > diff --git a/drivers/gpu/drm/vkms/vkms_crc.c b/drivers/gpu/drm/vkms/vkms_crc.c
> >> > > > > > index 37d717f38e3c..4853a739ae5a 100644
> >> > > > > > --- a/drivers/gpu/drm/vkms/vkms_crc.c
> >> > > > > > +++ b/drivers/gpu/drm/vkms/vkms_crc.c
> >> > > > > > @@ -1,36 +1,137 @@
> >> > > > > > // SPDX-License-Identifier: GPL-2.0
> >> > > > > > #include "vkms_drv.h"
> >> > > > > > #include <linux/crc32.h>
> >> > > > > > +#include <drm/drm_atomic.h>
> >> > > > > > +#include <drm/drm_atomic_helper.h>
> >> > > > > > #include <drm/drm_gem_framebuffer_helper.h>
> >> > > > > >
> >> > > > > > -static uint32_t _vkms_get_crc(struct vkms_crc_data *crc_data)
> >> > > > > > +/**
> >> > > > > > + * compute_crc - Compute CRC value on output frame
> >> > > > > > + *
> >> > > > > > + * @vaddr_out: address to final framebuffer
> >> > > > > > + * @crc_out: framebuffer's metadata
> >> > > > > > + *
> >> > > > > > + * returns CRC value computed using crc32 on the visible portion of
> >> > > > > > + * the final framebuffer at vaddr_out
> >> > > > > > + */
> >> > > > > > +static uint32_t compute_crc(void *vaddr_out, struct vkms_crc_data *crc_out)
> >> > > > > > {
> >> > > > > > - struct drm_framebuffer *fb = &crc_data->fb;
> >> > > > > > + int i, src_offset;
> >> > > > > > + int x_src = crc_out->src.x1 >> 16;
> >> > > > > > + int y_src = crc_out->src.y1 >> 16;
> >> > > > > > + int h_src = drm_rect_height(&crc_out->src) >> 16;
> >> > > > > > + int w_src = drm_rect_width(&crc_out->src) >> 16;
> >> > > > > > + int size_byte = w_src * crc_out->cpp;
> >> > > > > > + u32 crc = 0;
> >> > > > > > +
> >> > > > > > + for (i = y_src; i < y_src + h_src; i++) {
> >> > > > > > + src_offset = crc_out->offset
> >> > > > > > + + (i * crc_out->pitch)
> >> > > > > > + + (x_src * crc_out->cpp);
> >> > > > > > + crc = crc32_le(crc, vaddr_out + src_offset, size_byte);
> >> > > > > > + }
> >> > > > > > +
> >> > > > > > + return crc;
> >> > > > > > +}
> >> > > > > > +
> >> >
> >> > Hey Daniel,
> >> >
> >> > When I change the above function "compute_crc" to compute the CRC for
> >> > each pixel so we can clear the Alpha value before computing the CRC as bellow,
> >> > the test "nonblocking-crc-pipe-A-frame-sequence" sometimes failes and
> >> > sometimes passes. Should I still continue with the change, or leave it
> >> > as it is?
> >>
> >> Hm, how does it fail? Could be that the code becomes too slow, and then
> >> the frame counters don't increment nicely anymore. Or there's a race
> >> somewhere in the CRC code that gets exposed. But that's just me guessing.
> >> -Daniel
> >>
> >
> > Oh sorry I should've elaborated more on how it fails. Yeah I think it
> > becomes too slow and that can cause mismatch to frame counters?
> >
> > -----
> > (kms_pipe_crc_basic:1902) CRITICAL: Failed assertion: crcs[j].frame + 1 == crcs[j + 1].frame
> > (kms_pipe_crc_basic:1902) CRITICAL: Last errno: 9, Bad file descriptor
> > (kms_pipe_crc_basic:1902) CRITICAL: error: 1090928 != 1090929
> > -----
>
> Yeah misses the deadline it seems.
>
> > Maybe it's not that bad/slow because I've noticed that this happen
> > occasionally when I enable Ftrace.
>
> Yeah ftrace can have some decent overhead. And we're adding a pile of
> function calls, because crc32_le isn't inlined. Does it still happen
> without ftrace?
>
No, and it only happen occasionally with ftrace.
> Optimizing this will be some real work - we'd need a local cache to
> compute an entire block of blended pixels into, then add an entire
> block. Block size needs to be large enough to be efficient, but not so
> big that we start trashing the cache or have to allocate memory (stack
> space in the kernel is very limited). Would be good if we can avoid
> all this work just now ...
> -Danie
>
> >
> >> >
> >> > ----------------- vkms_crc.c -----------------
> >> > for (i = y_src; i < y_src + h_src; ++i) {
> >> > for (j = x_src; j < x_src + w_src; ++j) {
> >> > src_offset = crc_out->offset
> >> > + (i * crc_out->pitch)
> >> > + (j * crc_out->cpp);
> >> > memset(vaddr_out + src_offset + 24, 0, 8);
> >> > crc = crc32_le(crc, vaddr_out + src_offset, sizeof(u32));
> >> > }
> >> > }
> >> > ----------------- vkms_crc.c -----------------
> >> >
> >> > Thank you,
> >> > Haneen
> >> >
> >> > > > > > +/**
> >> > > > > > + * blend - belnd value at vaddr_src with value at vaddr_dst
> >> > > > > > + * @vaddr_dst: destination address
> >> > > > > > + * @vaddr_src: source address
> >> > > > > > + * @crc_dst: destination framebuffer's metadata
> >> > > > > > + * @crc_src: source framebuffer's metadata
> >> > > > > > + *
> >> > > > > > + * Blend value at vaddr_src with value at vaddr_dst.
> >> > > > > > + * Currently, this function write value at vaddr_src on value
> >> > > > > > + * at vaddr_dst using buffer's metadata to locate the new values
> >> > > > > > + * from vaddr_src and their distenation at vaddr_dst.
> >> > > > > > + *
> >> > > > > > + * Todo: Use the alpha value to blend vaddr_src with vaddr_dst
> >> > > > > > + * instead of overwriting it.
> >> > > > >
> >> > > > > Another todo: We must clear the alpha channel in the result after
> >> > > > > blending. This also applies to the primary plane, where the XRGB for the
> >> > > > > pixel format mandates that we entirely ignore the alpha channel.
> >> > > > >
> >> > > > > This is also something we should probably have an igt testcase for.
> >> > > > >
> >> > > > > Since there's a few open ends: How many weeks are left in your outreachy
> >> > > > > internship? We need to make sure that at least all the issues are covered
> >> > > > > in a vkms todo file. Would be great to add that in
> >> > > > > Documentation/gpu/vkms.rst, like we have for other drivers.
> >> > > > > -Daniel
> >> > > > >
> >> > > >
> >> > > > I've one more week! I can use this week to prepare the todo file and
> >> > > > finalize this patch?
> >> > >
> >> > > Yeah sounds like the perfect wrap-up work. Since this wont be enough to
> >> > > finish the cursor work it would be good to hide the cursor setup behind a
> >> > > module option, perhaps "enable_cursor" or so. That way we wont have
> >> > > not-totally-correct features enabled. And enabling/disabling cursor
> >> > > support could be useful for testing.
> >> > > -Daniel
> >> > >
> >> > > >
> >> > > > Thank you,
> >> > > > Haneen
> >> > > >
> >> > > > > > + */
> >> > > > > > +static void blend(void *vaddr_dst, void *vaddr_src,
> >> > > > > > + struct vkms_crc_data *crc_dst,
> >> > > > > > + struct vkms_crc_data *crc_src)
> >> > > > > > +{
> >> > > > > > + int i, j, j_dst, i_dst;
> >> > > > > > + int offset_src, offset_dst;
> >> > > > > > +
> >> > > > > > + int x_src = crc_src->src.x1 >> 16;
> >> > > > > > + int y_src = crc_src->src.y1 >> 16;
> >> > > > > > +
> >> > > > > > + int x_dst = crc_src->dst.x1;
> >> > > > > > + int y_dst = crc_src->dst.y1;
> >> > > > > > + int h_dst = drm_rect_height(&crc_src->dst);
> >> > > > > > + int w_dst = drm_rect_width(&crc_src->dst);
> >> > > > > > +
> >> > > > > > + int y_limit = y_src + h_dst;
> >> > > > > > + int x_limit = x_src + w_dst;
> >> > > > > > +
> >> > > > > > + for (i = y_src, i_dst = y_dst; i < y_limit; ++i) {
> >> > > > > > + for (j = x_src, j_dst = x_dst; j < x_limit; ++j) {
> >> > > > > > + offset_dst = crc_dst->offset
> >> > > > > > + + (i_dst * crc_dst->pitch)
> >> > > > > > + + (j_dst++ * crc_dst->cpp);
> >> > > > > > + offset_src = crc_src->offset
> >> > > > > > + + (i * crc_src->pitch)
> >> > > > > > + + (j * crc_src->cpp);
> >> > > > > > +
> >> > > > > > + memcpy(vaddr_dst + offset_dst,
> >> > > > > > + vaddr_src + offset_src, sizeof(u32));
> >> > > > > > + }
> >> > > > > > + i_dst++;
> >> > > > > > + }
> >> > > > > > +}
> >> > > > > > +
> >> > > > > > +static void compose_cursor(struct vkms_crc_data *cursor_crc,
> >> > > > > > + struct vkms_crc_data *primary_crc, void *vaddr_out)
> >> > > > > > +{
> >> > > > > > + struct drm_gem_object *cursor_obj;
> >> > > > > > + struct vkms_gem_object *cursor_vkms_obj;
> >> > > > > > +
> >> > > > > > + cursor_obj = drm_gem_fb_get_obj(&cursor_crc->fb, 0);
> >> > > > > > + cursor_vkms_obj = drm_gem_to_vkms_gem(cursor_obj);
> >> > > > > > +
> >> > > > > > + mutex_lock(&cursor_vkms_obj->pages_lock);
> >> > > > > > + if (WARN_ON(!cursor_vkms_obj->vaddr))
> >> > > > > > + goto out;
> >> > > > > > +
> >> > > > > > + blend(vaddr_out, cursor_vkms_obj->vaddr, primary_crc, cursor_crc);
> >> > > > > > +
> >> > > > > > +out:
> >> > > > > > + mutex_unlock(&cursor_vkms_obj->pages_lock);
> >> > > > > > +}
> >> > > > > > +
> >> > > > > > +static uint32_t _vkms_get_crc(struct vkms_crc_data *primary_crc,
> >> > > > > > + struct vkms_crc_data *cursor_crc)
> >> > > > > > +{
> >> > > > > > + struct drm_framebuffer *fb = &primary_crc->fb;
> >> > > > > > struct drm_gem_object *gem_obj = drm_gem_fb_get_obj(fb, 0);
> >> > > > > > struct vkms_gem_object *vkms_obj = drm_gem_to_vkms_gem(gem_obj);
> >> > > > > > + void *vaddr_out = kzalloc(vkms_obj->gem.size, GFP_KERNEL);
> >> > > > > > u32 crc = 0;
> >> > > > > > - int i = 0;
> >> > > > > > - unsigned int x = crc_data->src.x1 >> 16;
> >> > > > > > - unsigned int y = crc_data->src.y1 >> 16;
> >> > > > > > - unsigned int height = drm_rect_height(&crc_data->src) >> 16;
> >> > > > > > - unsigned int width = drm_rect_width(&crc_data->src) >> 16;
> >> > > > > > - unsigned int cpp = fb->format->cpp[0];
> >> > > > > > - unsigned int src_offset;
> >> > > > > > - unsigned int size_byte = width * cpp;
> >> > > > > > - void *vaddr;
> >> > > > > >
> >> > > > > > - mutex_lock(&vkms_obj->pages_lock);
> >> > > > > > - vaddr = vkms_obj->vaddr;
> >> > > > > > - if (WARN_ON(!vaddr))
> >> > > > > > - goto out;
> >> > > > > > + if (!vaddr_out) {
> >> > > > > > + DRM_ERROR("Failed to allocate memory for output frame.");
> >> > > > > > + return 0;
> >> > > > > > + }
> >> > > > > >
> >> > > > > > - for (i = y; i < y + height; i++) {
> >> > > > > > - src_offset = fb->offsets[0] + (i * fb->pitches[0]) + (x * cpp);
> >> > > > > > - crc = crc32_le(crc, vaddr + src_offset, size_byte);
> >> > > > > > + mutex_lock(&vkms_obj->pages_lock);
> >> > > > > > + if (WARN_ON(!vkms_obj->vaddr)) {
> >> > > > > > + mutex_lock(&vkms_obj->pages_lock);
> >> > > > > > + return crc;
> >> > > > > > }
> >> > > > > >
> >> > > > > > -out:
> >> > > > > > + memcpy(vaddr_out, vkms_obj->vaddr, vkms_obj->gem.size);
> >> > > > > > mutex_unlock(&vkms_obj->pages_lock);
> >> > > > > > +
> >> > > > > > + if (cursor_crc)
> >> > > > > > + compose_cursor(cursor_crc, primary_crc, vaddr_out);
> >> > > > > > +
> >> > > > > > + crc = compute_crc(vaddr_out, primary_crc);
> >> > > > > > +
> >> > > > > > + kfree(vaddr_out);
> >> > > > > > +
> >> > > > > > return crc;
> >> > > > > > }
> >> > > > > >
> >> > > > > > @@ -44,8 +145,8 @@ void vkms_crc_work_handle(struct work_struct *work)
> >> > > > > > struct vkms_device *vdev = container_of(out, struct vkms_device,
> >> > > > > > output);
> >> > > > > > struct vkms_crc_data *primary_crc = NULL;
> >> > > > > > + struct vkms_crc_data *cursor_crc = NULL;
> >> > > > > > struct drm_plane *plane;
> >> > > > > > -
> >> > > > > > u32 crc32 = 0;
> >> > > > > >
> >> > > > > > drm_for_each_plane(plane, &vdev->drm) {
> >> > > > > > @@ -58,14 +159,14 @@ void vkms_crc_work_handle(struct work_struct *work)
> >> > > > > > if (drm_framebuffer_read_refcount(&crc_data->fb) == 0)
> >> > > > > > continue;
> >> > > > > >
> >> > > > > > - if (plane->type == DRM_PLANE_TYPE_PRIMARY) {
> >> > > > > > + if (plane->type == DRM_PLANE_TYPE_PRIMARY)
> >> > > > > > primary_crc = crc_data;
> >> > > > > > - break;
> >> > > > > > - }
> >> > > > > > + else
> >> > > > > > + cursor_crc = crc_data;
> >> > > > > > }
> >> > > > > >
> >> > > > > > if (primary_crc)
> >> > > > > > - crc32 = _vkms_get_crc(primary_crc);
> >> > > > > > + crc32 = _vkms_get_crc(primary_crc, cursor_crc);
> >> > > > > >
> >> > > > > > drm_crtc_add_crc_entry(crtc, true, crtc_state->n_frame, &crc32);
> >> > > > > > }
> >> > > > > > diff --git a/drivers/gpu/drm/vkms/vkms_drv.h b/drivers/gpu/drm/vkms/vkms_drv.h
> >> > > > > > index 36e524f791fe..173875dc361e 100644
> >> > > > > > --- a/drivers/gpu/drm/vkms/vkms_drv.h
> >> > > > > > +++ b/drivers/gpu/drm/vkms/vkms_drv.h
> >> > > > > > @@ -25,8 +25,11 @@ static const u32 vkms_cursor_formats[] = {
> >> > > > > > };
> >> > > > > >
> >> > > > > > struct vkms_crc_data {
> >> > > > > > - struct drm_rect src;
> >> > > > > > struct drm_framebuffer fb;
> >> > > > > > + struct drm_rect src, dst;
> >> > > > > > + unsigned int offset;
> >> > > > > > + unsigned int pitch;
> >> > > > > > + unsigned int cpp;
> >> > > > > > };
> >> > > > > >
> >> > > > > > /**
> >> > > > > > diff --git a/drivers/gpu/drm/vkms/vkms_plane.c b/drivers/gpu/drm/vkms/vkms_plane.c
> >> > > > > > index 428247d403dc..7041007396ae 100644
> >> > > > > > --- a/drivers/gpu/drm/vkms/vkms_plane.c
> >> > > > > > +++ b/drivers/gpu/drm/vkms/vkms_plane.c
> >> > > > > > @@ -85,16 +85,22 @@ static void vkms_plane_atomic_update(struct drm_plane *plane,
> >> > > > > > struct drm_plane_state *old_state)
> >> > > > > > {
> >> > > > > > struct vkms_plane_state *vkms_plane_state;
> >> > > > > > + struct drm_framebuffer *fb = plane->state->fb;
> >> > > > > > struct vkms_crc_data *crc_data;
> >> > > > > >
> >> > > > > > - if (!plane->state->crtc || !plane->state->fb)
> >> > > > > > + if (!plane->state->crtc || !fb)
> >> > > > > > return;
> >> > > > > >
> >> > > > > > vkms_plane_state = to_vkms_plane_state(plane->state);
> >> > > > > > +
> >> > > > > > crc_data = vkms_plane_state->crc_data;
> >> > > > > > memcpy(&crc_data->src, &plane->state->src, sizeof(struct drm_rect));
> >> > > > > > - memcpy(&crc_data->fb, plane->state->fb, sizeof(struct drm_framebuffer));
> >> > > > > > + memcpy(&crc_data->dst, &plane->state->dst, sizeof(struct drm_rect));
> >> > > > > > + memcpy(&crc_data->fb, fb, sizeof(struct drm_framebuffer));
> >> > > > > > drm_framebuffer_get(&crc_data->fb);
> >> > > > > > + crc_data->offset = fb->offsets[0];
> >> > > > > > + crc_data->pitch = fb->pitches[0];
> >> > > > > > + crc_data->cpp = fb->format->cpp[0];
> >> > > > > > }
> >> > > > > >
> >> > > > > > static int vkms_plane_atomic_check(struct drm_plane *plane,
> >> > > > > > --
> >> > > > > > 2.17.1
> >> > > > > >
> >> > > > >
> >> > > > > --
> >> > > > > Daniel Vetter
> >> > > > > Software Engineer, Intel Corporation
> >> > > > > http://blog.ffwll.ch
> >> > >
> >> > > --
> >> > > Daniel Vetter
> >> > > Software Engineer, Intel Corporation
> >> > > http://blog.ffwll.ch
> >>
> >> --
> >> Daniel Vetter
> >> Software Engineer, Intel Corporation
> >> http://blog.ffwll.ch
>
>
>
> --
> Daniel Vetter
> Software Engineer, Intel Corporation
> +41 (0) 79 365 57 48 - http://blog.ffwll.ch
More information about the dri-devel
mailing list