[PATCH v4 1/2] drm: Add per-plane pixel blend mode property
Liviu Dudau
liviu.dudau at arm.com
Wed Aug 15 10:10:48 UTC 2018
On Wed, Aug 15, 2018 at 02:35:32PM +0800, Lowry Li wrote:
> Pixel blend modes represent the alpha blending equation
> selection, describing how the pixels from the current
> plane are composited with the background.
>
> Adds a pixel_blend_mode to drm_plane_state and a
> blend_mode_property to drm_plane, and related support
> functions.
>
> Defines three blend modes in drm_blend.h.
>
> Changes since v1:
> - Moves the blending equation into the DOC comment
> - Refines the comments of drm_plane_create_blend_mode_property to not
> enumerate the #defines, but instead the string values
> - Uses fg.* instead of pixel.* and plane_alpha instead of plane.alpha
> Changes since v2:
> - Refines the comments of drm_plane_create_blend_mode_property:
> 1) Puts the descriptions (after the ":") on a new line
> 2) Adds explaining why @supported_modes need PREMUL as default
> Changes since v3:
> - Refines drm_plane_create_blend_mode_property(). drm_property_add_enum()
> can calculate the index itself just fine, so no point in having the
> caller pass it in.
> - Since the current DRM assumption is that alpha is premultiplied
> as default, define DRM_MODE_BLEND_PREMULTI as 0 will be better.
> - Refines some comments.
>
> Signed-off-by: Lowry Li <lowry.li at arm.com>
Looks good to me!
Reviewed-by: Liviu Dudau <liviu.dudau at arm.com>
Thanks,
Liviu
> ---
> drivers/gpu/drm/drm_atomic.c | 4 ++
> drivers/gpu/drm/drm_atomic_helper.c | 1 +
> drivers/gpu/drm/drm_blend.c | 126 ++++++++++++++++++++++++++++++++++++
> include/drm/drm_blend.h | 6 ++
> include/drm/drm_plane.h | 2 +
> 5 files changed, 139 insertions(+)
>
> diff --git a/drivers/gpu/drm/drm_atomic.c b/drivers/gpu/drm/drm_atomic.c
> index 3eb061e..d0478ab 100644
> --- a/drivers/gpu/drm/drm_atomic.c
> +++ b/drivers/gpu/drm/drm_atomic.c
> @@ -895,6 +895,8 @@ static int drm_atomic_plane_set_property(struct drm_plane *plane,
> state->src_h = val;
> } else if (property == plane->alpha_property) {
> state->alpha = val;
> + } else if (property == plane->blend_mode_property) {
> + state->pixel_blend_mode = val;
> } else if (property == plane->rotation_property) {
> if (!is_power_of_2(val & DRM_MODE_ROTATE_MASK)) {
> DRM_DEBUG_ATOMIC("[PLANE:%d:%s] bad rotation bitmask: 0x%llx\n",
> @@ -968,6 +970,8 @@ static int drm_atomic_plane_set_property(struct drm_plane *plane,
> *val = state->src_h;
> } else if (property == plane->alpha_property) {
> *val = state->alpha;
> + } else if (property == plane->blend_mode_property) {
> + *val = state->pixel_blend_mode;
> } else if (property == plane->rotation_property) {
> *val = state->rotation;
> } else if (property == plane->zpos_property) {
> diff --git a/drivers/gpu/drm/drm_atomic_helper.c b/drivers/gpu/drm/drm_atomic_helper.c
> index 6dd5036..563af09 100644
> --- a/drivers/gpu/drm/drm_atomic_helper.c
> +++ b/drivers/gpu/drm/drm_atomic_helper.c
> @@ -3569,6 +3569,7 @@ void __drm_atomic_helper_plane_reset(struct drm_plane *plane,
> /* Reset the alpha value to fully opaque if it matters */
> if (plane->alpha_property)
> state->alpha = plane->alpha_property->values[1];
> + plane->state->pixel_blend_mode = DRM_MODE_BLEND_PREMULTI;
>
> plane->state = state;
> }
> diff --git a/drivers/gpu/drm/drm_blend.c b/drivers/gpu/drm/drm_blend.c
> index a16a74d..24016c9 100644
> --- a/drivers/gpu/drm/drm_blend.c
> +++ b/drivers/gpu/drm/drm_blend.c
> @@ -107,6 +107,52 @@
> * planes. Without this property the primary plane is always below the cursor
> * plane, and ordering between all other planes is undefined.
> *
> + * pixel blend mode:
> + * Pixel blend mode is set up with drm_plane_create_blend_mode_property().
> + * It adds a blend mode for alpha blending equation selection, describing
> + * how the pixels from the current plane are composited with the
> + * background.
> + *
> + * Three alpha blending equations are defined:
> + *
> + * "None":
> + * Blend formula that ignores the pixel alpha::
> + *
> + * out.rgb = plane_alpha * fg.rgb +
> + * (1 - plane_alpha) * bg.rgb
> + *
> + * "Pre-multiplied":
> + * Blend formula that assumes the pixel color values
> + * have been already pre-multiplied with the alpha
> + * channel values::
> + *
> + * out.rgb = plane_alpha * fg.rgb +
> + * (1 - (plane_alpha * fg.alpha)) * bg.rgb
> + *
> + * "Coverage":
> + * Blend formula that assumes the pixel color values have not
> + * been pre-multiplied and will do so when blending them to the
> + * background color values::
> + *
> + * out.rgb = plane_alpha * fg.alpha * fg.rgb +
> + * (1 - (plane_alpha * fg.alpha)) * bg.rgb
> + *
> + * Using the following symbols:
> + *
> + * "fg.rgb":
> + * Each of the RGB component values from the plane's pixel
> + * "fg.alpha":
> + * Alpha component value from the plane's pixel. If the plane's
> + * pixel format has no alpha component, then this is assumed to be
> + * 1.0. In these cases, this property has no effect, as all three
> + * equations become equivalent.
> + * "bg.rgb":
> + * Each of the RGB component values from the background
> + * "plane_alpha":
> + * Plane alpha value set by the plane "alpha" property. If the
> + * plane does not expose the "alpha" property, then this is
> + * assumed to be 1.0
> + *
> * Note that all the property extensions described here apply either to the
> * plane or the CRTC (e.g. for the background color, which currently is not
> * exposed and assumed to be black).
> @@ -448,3 +494,83 @@ int drm_atomic_normalize_zpos(struct drm_device *dev,
> return 0;
> }
> EXPORT_SYMBOL(drm_atomic_normalize_zpos);
> +
> +/**
> + * drm_plane_create_blend_mode_property - create a new blend mode property
> + * @plane: drm plane
> + * @supported_modes: bitmask of supported modes, must include
> + * BIT(DRM_MODE_BLEND_PREMULTI). Current DRM assumption is
> + * that alpha is premultiplied, and old userspace can break if
> + * the property defaults to anything else.
> + *
> + * This creates a new property describing the blend mode.
> + *
> + * The property exposed to userspace is an enumeration property (see
> + * drm_property_create_enum()) called "pixel blend mode" and has the
> + * following enumeration values:
> + *
> + * "None":
> + * Blend formula that ignores the pixel alpha.
> + *
> + * "Pre-multiplied":
> + * Blend formula that assumes the pixel color values have been already
> + * pre-multiplied with the alpha channel values.
> + *
> + * "Coverage":
> + * Blend formula that assumes the pixel color values have not been
> + * pre-multiplied and will do so when blending them to the background color
> + * values.
> + *
> + * RETURNS:
> + * Zero for success or -errno
> + */
> +int drm_plane_create_blend_mode_property(struct drm_plane *plane,
> + unsigned int supported_modes)
> +{
> + struct drm_device *dev = plane->dev;
> + struct drm_property *prop;
> + static const struct drm_prop_enum_list props[] = {
> + { DRM_MODE_BLEND_PIXEL_NONE, "None" },
> + { DRM_MODE_BLEND_PREMULTI, "Pre-multiplied" },
> + { DRM_MODE_BLEND_COVERAGE, "Coverage" },
> + };
> + unsigned int valid_mode_mask = BIT(DRM_MODE_BLEND_PIXEL_NONE) |
> + BIT(DRM_MODE_BLEND_PREMULTI) |
> + BIT(DRM_MODE_BLEND_COVERAGE);
> + int i;
> +
> + if (WARN_ON((supported_modes & ~valid_mode_mask) ||
> + ((supported_modes & BIT(DRM_MODE_BLEND_PREMULTI)) == 0)))
> + return -EINVAL;
> +
> + prop = drm_property_create(dev, DRM_MODE_PROP_ENUM,
> + "pixel blend mode",
> + hweight32(supported_modes));
> + if (!prop)
> + return -ENOMEM;
> +
> + for (i = 0; i < ARRAY_SIZE(props); i++) {
> + int ret;
> +
> + if (!(BIT(props[i].type) & supported_modes))
> + continue;
> +
> + ret = drm_property_add_enum(prop, props[i].type,
> + props[i].name);
> +
> + if (ret) {
> + drm_property_destroy(dev, prop);
> +
> + return ret;
> + }
> + }
> +
> + drm_object_attach_property(&plane->base, prop, DRM_MODE_BLEND_PREMULTI);
> + plane->blend_mode_property = prop;
> +
> + if (plane->state)
> + plane->state->pixel_blend_mode = DRM_MODE_BLEND_PREMULTI;
> +
> + return 0;
> +}
> +EXPORT_SYMBOL(drm_plane_create_blend_mode_property);
> diff --git a/include/drm/drm_blend.h b/include/drm/drm_blend.h
> index 330c561..88bdfec 100644
> --- a/include/drm/drm_blend.h
> +++ b/include/drm/drm_blend.h
> @@ -27,6 +27,10 @@
> #include <linux/ctype.h>
> #include <drm/drm_mode.h>
>
> +#define DRM_MODE_BLEND_PREMULTI 0
> +#define DRM_MODE_BLEND_COVERAGE 1
> +#define DRM_MODE_BLEND_PIXEL_NONE 2
> +
> struct drm_device;
> struct drm_atomic_state;
> struct drm_plane;
> @@ -52,4 +56,6 @@ int drm_plane_create_zpos_immutable_property(struct drm_plane *plane,
> unsigned int zpos);
> int drm_atomic_normalize_zpos(struct drm_device *dev,
> struct drm_atomic_state *state);
> +int drm_plane_create_blend_mode_property(struct drm_plane *plane,
> + unsigned int supported_modes);
> #endif
> diff --git a/include/drm/drm_plane.h b/include/drm/drm_plane.h
> index 8a152dc..c52614a 100644
> --- a/include/drm/drm_plane.h
> +++ b/include/drm/drm_plane.h
> @@ -117,6 +117,7 @@ struct drm_plane_state {
> * details.
> */
> u16 alpha;
> + uint16_t pixel_blend_mode;
>
> /**
> * @rotation:
> @@ -659,6 +660,7 @@ struct drm_plane {
> * drm_plane_create_rotation_property().
> */
> struct drm_property *rotation_property;
> + struct drm_property *blend_mode_property;
>
> /**
> * @color_encoding_property:
> --
> 1.9.1
>
--
====================
| I would like to |
| fix the world, |
| but they're not |
| giving me the |
\ source code! /
---------------
¯\_(ツ)_/¯
More information about the dri-devel
mailing list