[PATCH10 3/3] ARM:drm ivip Intel FPGA Video and Image Processing Suite
Noralf Trønnes
noralf at tronnes.org
Wed Aug 15 12:26:33 UTC 2018
Den 14.08.2018 10.57, skrev Hean-Loong, Ong:
> From: Ong Hean Loong <hean.loong.ong at intel.com>
>
> Driver for Intel FPGA Video and Image Processing Suite Frame Buffer II.
> The driver only supports the Intel Arria10 devkit and its variants.
> This driver can be either loaded staticlly or in modules.
> The OF device tree binding is located at:
> Documentation/devicetree/bindings/display/altr,vip-fb2.txt
>
> Signed-off-by: Ong Hean Loong <hean.loong.ong at intel.com>
> ---
> drivers/gpu/drm/Kconfig | 2 +
> drivers/gpu/drm/Makefile | 1 +
> drivers/gpu/drm/ivip/Kconfig | 14 +++
> drivers/gpu/drm/ivip/Makefile | 9 ++
> drivers/gpu/drm/ivip/intel_vip_conn.c | 95 ++++++++++++++++
> drivers/gpu/drm/ivip/intel_vip_core.c | 161 +++++++++++++++++++++++++++
> drivers/gpu/drm/ivip/intel_vip_drv.h | 52 +++++++++
> drivers/gpu/drm/ivip/intel_vip_of.c | 193 +++++++++++++++++++++++++++++++++
> 8 files changed, 527 insertions(+), 0 deletions(-)
> create mode 100644 drivers/gpu/drm/ivip/Kconfig
> create mode 100644 drivers/gpu/drm/ivip/Makefile
> create mode 100644 drivers/gpu/drm/ivip/intel_vip_conn.c
> create mode 100644 drivers/gpu/drm/ivip/intel_vip_core.c
> create mode 100644 drivers/gpu/drm/ivip/intel_vip_drv.h
> create mode 100644 drivers/gpu/drm/ivip/intel_vip_of.c
>
> diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
> index cb88528..6b2845b 100644
> --- a/drivers/gpu/drm/Kconfig
> +++ b/drivers/gpu/drm/Kconfig
> @@ -215,6 +215,8 @@ source "drivers/gpu/drm/nouveau/Kconfig"
>
> source "drivers/gpu/drm/i915/Kconfig"
>
> +source "drivers/gpu/drm/ivip/Kconfig"
> +
> config DRM_VGEM
> tristate "Virtual GEM provider"
> depends on DRM
> diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile
> index a6771ce..57205d8 100644
> --- a/drivers/gpu/drm/Makefile
> +++ b/drivers/gpu/drm/Makefile
> @@ -61,6 +61,7 @@ obj-$(CONFIG_DRM_AMDGPU)+= amd/amdgpu/
> obj-$(CONFIG_DRM_MGA) += mga/
> obj-$(CONFIG_DRM_I810) += i810/
> obj-$(CONFIG_DRM_I915) += i915/
> +obj-$(CONFIG_DRM_IVIP) += ivip/
> obj-$(CONFIG_DRM_MGAG200) += mgag200/
> obj-$(CONFIG_DRM_V3D) += v3d/
> obj-$(CONFIG_DRM_VC4) += vc4/
> diff --git a/drivers/gpu/drm/ivip/Kconfig b/drivers/gpu/drm/ivip/Kconfig
> new file mode 100644
> index 0000000..1d08b90
> --- /dev/null
> +++ b/drivers/gpu/drm/ivip/Kconfig
> @@ -0,0 +1,14 @@
> +config DRM_IVIP
> + tristate "Intel FGPA Video and Image Processing"
> + depends on DRM && OF
> + select DRM_GEM_CMA_HELPER
> + select DRM_KMS_HELPER
> + select DRM_KMS_FB_HELPER
> + select DRM_KMS_CMA_HELPER
> + help
> + Choose this option if you have an Intel FPGA Arria 10 system
> + and above with an Intel Display Port IP. This does not support
> + legacy Intel FPGA Cyclone V display port. Currently only single
> + frame buffer is supported. Note that ACPI and X_86 architecture
> + is not supported for Arria10. If M is selected the module will be
> + called ivip.
> diff --git a/drivers/gpu/drm/ivip/Makefile b/drivers/gpu/drm/ivip/Makefile
> new file mode 100644
> index 0000000..cc55b04
> --- /dev/null
> +++ b/drivers/gpu/drm/ivip/Makefile
> @@ -0,0 +1,9 @@
> +#
> +# Makefile for the drm device driver. This driver provides support for the
> +# Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher.
> +
> +ccflags-y := -Iinclude/drm
This shouldn't be necessary AFAIK.
> +
> +obj-$(CONFIG_DRM_IVIP) += ivip.o
> +ivip-objs := intel_vip_of.o intel_vip_core.o \
> + intel_vip_conn.o
> diff --git a/drivers/gpu/drm/ivip/intel_vip_conn.c b/drivers/gpu/drm/ivip/intel_vip_conn.c
> new file mode 100644
> index 0000000..46bb04c
> --- /dev/null
> +++ b/drivers/gpu/drm/ivip/intel_vip_conn.c
> @@ -0,0 +1,95 @@
Please add an SPDX indentifier at the top of your files and you can drop
the license text.
Header files use this:
/* SPDX-License-Identifier: GPL-2.0 */
C-files uses c++ comment due to reasons:
// SPDX-License-Identifier: GPL-2.0
> +/*
> + * intel_vip_conn.c -- Intel Video and Image Processing(VIP)
> + * Frame Buffer II driver
> + *
> + * This driver supports the Intel VIP Frame Reader component.
> + * More info on the hardware can be found in the Intel Video
> + * and Image Processing Suite User Guide at this address
> + * http://www.altera.com/literature/ug/ug_vip.pdf.
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms and conditions of the GNU General Public License,
> + * version 2, as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
> + * more details.
> + *
> + * Authors:
> + * Ong, Hean-Loong <hean.loong.ong at intel.com>
> + *
> + */
> +
> +#include <linux/init.h>
> +#include <linux/kernel.h>
> +#include <drm/drm_atomic_helper.h>
> +#include <drm/drm_crtc_helper.h>
> +#include <drm/drm_encoder_slave.h>
> +#include <drm/drm_plane_helper.h>
> +
> +static enum drm_connector_status
> +intelvipfb_drm_connector_detect(struct drm_connector *connector, bool force)
> +{
> + return connector_status_connected;
> +}
> +
> +static void intelvipfb_drm_connector_destroy(struct drm_connector *connector)
> +{
> + drm_connector_unregister(connector);
> + drm_connector_cleanup(connector);
> +}
> +
> +static const struct drm_connector_funcs intelvipfb_drm_connector_funcs = {
> + .reset = drm_atomic_helper_connector_reset,
> + .detect = intelvipfb_drm_connector_detect,
> + .fill_modes = drm_helper_probe_single_connector_modes,
> + .destroy = intelvipfb_drm_connector_destroy,
> + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
> +};
> +
> +static int intelvipfb_drm_connector_get_modes(struct drm_connector *connector)
> +{
> + struct drm_device *drm = connector->dev;
> + int count;
> +
> + count = drm_add_modes_noedid(connector, drm->mode_config.max_width,
> + drm->mode_config.max_height);
> + drm_set_preferred_mode(connector, drm->mode_config.max_width,
> + drm->mode_config.max_height);
> + return count;
> +}
> +
> +static const struct drm_connector_helper_funcs
> +intelvipfb_drm_connector_helper_funcs = {
> + .get_modes = intelvipfb_drm_connector_get_modes,
> +};
> +
> +struct drm_connector *
> +intelvipfb_conn_setup(struct drm_device *drm)
> +{
> + struct drm_connector *conn;
> + int ret;
> +
> + conn = devm_kzalloc(drm->dev, sizeof(*conn), GFP_KERNEL);
> + if (IS_ERR(conn))
> + return NULL;
> +
> + ret = drm_connector_init(drm, conn, &intelvipfb_drm_connector_funcs,
> + DRM_MODE_CONNECTOR_DisplayPort);
> + if (ret < 0) {
> + dev_err(drm->dev, "failed to initialize drm connector\n");
> + ret = -ENOMEM;
> + goto error_connector_cleanup;
> + }
> +
> + conn->polled = 0;
No need to set this, it is already zero from the allocation.
> + drm_connector_helper_add(conn, &intelvipfb_drm_connector_helper_funcs);
> +
> + return conn;
> +
> +error_connector_cleanup:
> + drm_connector_cleanup(conn);
> +
> + return NULL;
> +}
> diff --git a/drivers/gpu/drm/ivip/intel_vip_core.c b/drivers/gpu/drm/ivip/intel_vip_core.c
> new file mode 100644
> index 0000000..b601bb4
> --- /dev/null
> +++ b/drivers/gpu/drm/ivip/intel_vip_core.c
> @@ -0,0 +1,160 @@
> +/*
> + * intel_vip_core.c -- Intel Video and Image Processing(VIP)
> + * Frame Buffer II driver
> + *
> + * This driver supports the Intel VIP Frame Reader component.
> + * More info on the hardware can be found in the Intel Video
> + * and Image Processing Suite User Guide at this address
> + * http://www.altera.com/literature/ug/ug_vip.pdf.
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms and conditions of the GNU General Public License,
> + * version 2, as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
> + * more details.
> + *
> + * Authors:
> + * Ong, Hean-Loong <hean.loong.ong at intel.com>
> + *
> + */
> +
> +#include <drm/drmP.h>
> +#include <drm/drm_atomic.h>
> +#include <drm/drm_atomic_helper.h>
> +#include <drm/drm_crtc_helper.h>
> +#include <drm/drm_fb_helper.h>
> +#include <drm/drm_fb_cma_helper.h>
> +#include <drm/drm_gem_cma_helper.h>
> +#include <drm/drm_plane_helper.h>
> +#include <drm/drm_simple_kms_helper.h>
> +#include <drm/drm_gem_framebuffer_helper.h>
> +
> +#include <linux/init.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +
> +#include "intel_vip_drv.h"
> +
> +static void intelvipfb_enable(struct drm_simple_display_pipe *pipe,
> + struct drm_crtc_state *crtc_state, struct drm_plane_state *plane_state)
> +{
> + /*
> + * The frameinfo variable has to correspond to the size of the VIP Suite
> + * Frame Reader register 7 which will determine the maximum size used
> + * in this frameinfo
> + */
> +
> + u32 frameinfo;
> + struct intelvipfb_priv *priv = pipe->plane.dev->dev_private;
> + void __iomem *base = priv->base;
> + struct drm_plane_state *state = pipe->plane.state;
> + dma_addr_t addr;
> +
> + addr = drm_fb_cma_get_gem_addr(state->fb, state, 0);
> +
> + frameinfo =
> + readl(base + INTELVIPFB_FRAME_READER) & 0x00ffffff;
> + writel(frameinfo, base + INTELVIPFB_FRAME_INFO);
> + writel(addr, base + INTELVIPFB_FRAME_START);
> + /* Finally set the control register to 1 to start streaming */
> + writel(1, base + INTELVIPFB_CONTROL);
> +}
> +
> +static void intelvipfb_disable(struct drm_simple_display_pipe *pipe)
> +{
> + struct intelvipfb_priv *priv = pipe->plane.dev->dev_private;
> + void __iomem *base = priv->base;
> + /* set the control register to 0 to stop streaming */
> + writel(0, base + INTELVIPFB_CONTROL);
> +}
> +
> +static const struct drm_mode_config_funcs intelvipfb_mode_config_funcs = {
> + .fb_create = drm_gem_fb_create,
> + .atomic_check = drm_atomic_helper_check,
> + .atomic_commit = drm_atomic_helper_commit,
> +};
> +
> +static void intelvipfb_setup_mode_config(struct drm_device *drm)
> +{
> + drm_mode_config_init(drm);
> + drm->mode_config.funcs = &intelvipfb_mode_config_funcs;
> +}
> +
> +static int intelvipfb_pipe_prepare_fb(struct drm_simple_display_pipe *pipe,
> + struct drm_plane_state *plane_state)
> +{
> + return drm_gem_fb_prepare_fb(&pipe->plane, plane_state);
> +}
> +
> +static struct drm_simple_display_pipe_funcs fbpriv_funcs = {
> + .prepare_fb = intelvipfb_pipe_prepare_fb,
You can use drm_gem_fb_simple_display_pipe_prepare_fb(), no need to roll
your own.
> + .enable = intelvipfb_enable,
> + .disable = intelvipfb_disable
> +};
> +
> +int intelvipfb_probe(struct device *dev)
> +{
> + int retval;
> + struct drm_device *drm;
> + struct intelvipfb_priv *fbpriv = dev_get_drvdata(dev);
> + struct drm_connector *connector;
> + u32 formats[] = {DRM_FORMAT_XRGB8888};
> +
> + drm = fbpriv->drm;
> +
> + drm->dev_private = fbpriv;
> +
> + intelvipfb_setup_mode_config(drm);
> +
> + connector = intelvipfb_conn_setup(drm);
> + if (!connector) {
> + dev_err(drm->dev, "Connector setup failed\n");
> + goto err_mode_config;
> + }
> +
> + retval = drm_simple_display_pipe_init(drm, &fbpriv->pipe,
> + &fbpriv_funcs, formats,
> + ARRAY_SIZE(formats), NULL, connector);
> + if (retval < 0) {
> + dev_err(drm->dev, "Cannot setup simple display pipe\n");
> + goto err_mode_config;
> + }
> +
> + fbpriv->fbcma = drm_fbdev_cma_init(drm,
> + drm->mode_config.preferred_depth,
> + drm->mode_config.num_connector);
Please use drm_fbdev_generic_setup() for fbdev emulation. It tears down
automatically on drm_dev_unregister() and you don't need the
drm_driver->lastclose hook.
All drivers that use drm_fbdev_cma_init() will move to this shortly.
Noralf.
> +
> + drm_mode_config_reset(drm);
> +
> + drm_dev_register(drm, 0);
> +
> + return retval;
> +
> +err_mode_config:
> +
> + drm_mode_config_cleanup(drm);
> + return -ENODEV;
> +}
> +
> +int intelvipfb_remove(struct device *dev)
> +{
> + struct intelvipfb_priv *fbpriv = dev_get_drvdata(dev);
> + struct drm_device *drm = fbpriv->drm;
> +
> + drm_dev_unregister(drm);
> +
> + if (fbpriv->fbcma)
> + drm_fbdev_cma_fini(fbpriv->fbcma);
> +
> + drm_mode_config_cleanup(drm);
> + drm_dev_unref(drm);
> +
> + return 0;
> +}
> +
> +MODULE_AUTHOR("Ong, Hean-Loong <hean.loong.ong at intel.com>");
> +MODULE_DESCRIPTION("Intel VIP Frame Buffer II driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/gpu/drm/ivip/intel_vip_drv.h b/drivers/gpu/drm/ivip/intel_vip_drv.h
> new file mode 100644
> index 0000000..0a3555d
> --- /dev/null
> +++ b/drivers/gpu/drm/ivip/intel_vip_drv.h
> @@ -0,0 +1,52 @@
> +/*
> + * Copyright (C) 2017 Intel Corporation.
> + *
> + * Intel Video and Image Processing(VIP) Frame Buffer II driver.
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms and conditions of the GNU General Public License,
> + * version 2, as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License along with
> + * this program. If not, see <http://www.gnu.org/licenses/>.
> + *
> + * Authors:
> + * Ong, Hean-Loong <hean.loong.ong at intel.com>
> + *
> + */
> +#ifndef _INTEL_VIP_DRV_H
> +#define _INTEL_VIP_DRV_H
> +
> +#define DRIVER_NAME "intelvipfb"
> +#define BYTES_PER_PIXEL 4
> +#define CRTC_NUM 1
> +#define CONN_NUM 1
> +
> +/* control registers */
> +#define INTELVIPFB_CONTROL 0
> +#define INTELVIPFB_STATUS 0x4
> +#define INTELVIPFB_INTERRUPT 0x8
> +#define INTELVIPFB_FRAME_COUNTER 0xC
> +#define INTELVIPFB_FRAME_DROP 0x10
> +#define INTELVIPFB_FRAME_INFO 0x14
> +#define INTELVIPFB_FRAME_START 0x18
> +#define INTELVIPFB_FRAME_READER 0x1C
> +
> +int intelvipfb_probe(struct device *dev);
> +int intelvipfb_remove(struct device *dev);
> +int intelvipfb_setup_crtc(struct drm_device *drm);
> +struct drm_connector *intelvipfb_conn_setup(struct drm_device *drm);
> +
> +struct intelvipfb_priv {
> + struct drm_simple_display_pipe pipe;
> + struct drm_fbdev_cma *fbcma;
> + struct drm_device *drm;
> + void __iomem *base;
> +};
> +
> +#endif
> diff --git a/drivers/gpu/drm/ivip/intel_vip_of.c b/drivers/gpu/drm/ivip/intel_vip_of.c
> new file mode 100644
> index 0000000..47302f9
> --- /dev/null
> +++ b/drivers/gpu/drm/ivip/intel_vip_of.c
> @@ -0,0 +1,193 @@
> +/*
> + * intel_vip_of.c -- Intel Video and Image Processing(VIP)
> + * Frame Buffer II driver
> + *
> + * This driver supports the Intel VIP Frame Reader component.
> + * More info on the hardware can be found in the Intel Video
> + * and Image Processing Suite User Guide at this address
> + * http://www.altera.com/literature/ug/ug_vip.pdf.
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms and conditions of the GNU General Public License,
> + * version 2, as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
> + * more details.
> + *
> + * Authors:
> + * Ong, Hean-Loong <hean.loong.ong at intel.com>
> + *
> + */
> +#include <drm/drm_fb_helper.h>
> +#include <drm/drm_fb_cma_helper.h>
> +#include <drm/drm_gem_cma_helper.h>
> +#include <drm/drm_of.h>
> +#include <drm/drm_simple_kms_helper.h>
> +
> +#include <linux/component.h>
> +#include <linux/init.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +
> +#include "intel_vip_drv.h"
> +
> +DEFINE_DRM_GEM_CMA_FOPS(drm_fops);
> +
> +static void intelvipfb_lastclose(struct drm_device *drm)
> +{
> + struct intelvipfb_priv *priv = drm->dev_private;
> +
> + drm_fbdev_cma_restore_mode(priv->fbcma);
> +}
> +
> +static struct drm_driver intelvipfb_drm = {
> + .driver_features =
> + DRIVER_MODESET | DRIVER_GEM |
> + DRIVER_PRIME | DRIVER_ATOMIC,
> + .gem_free_object_unlocked = drm_gem_cma_free_object,
> + .gem_vm_ops = &drm_gem_cma_vm_ops,
> + .dumb_create = drm_gem_cma_dumb_create,
> + .dumb_destroy = drm_gem_dumb_destroy,
> + .prime_handle_to_fd = drm_gem_prime_handle_to_fd,
> + .prime_fd_to_handle = drm_gem_prime_fd_to_handle,
> + .gem_prime_export = drm_gem_prime_export,
> + .gem_prime_import = drm_gem_prime_import,
> + .gem_prime_get_sg_table = drm_gem_cma_prime_get_sg_table,
> + .gem_prime_import_sg_table = drm_gem_cma_prime_import_sg_table,
> + .gem_prime_vmap = drm_gem_cma_prime_vmap,
> + .gem_prime_vunmap = drm_gem_cma_prime_vunmap,
> + .gem_prime_mmap = drm_gem_cma_prime_mmap,
> + .lastclose = intelvipfb_lastclose,
> + .name = DRIVER_NAME,
> + .date = "20170729",
> + .desc = "Intel FPGA VIP SUITE",
> + .major = 1,
> + .minor = 0,
> + .ioctls = NULL,
> + .patchlevel = 0,
> + .fops = &drm_fops,
> +};
> +
> +/*
> + * Setting up information derived from OF Device Tree Nodes
> + * max-width, max-height, bits per pixel, memory port width
> + */
> +
> +static int intelvipfb_drm_setup(struct device *dev,
> + struct intelvipfb_priv *fbpriv)
> +{
> + struct drm_device *drm = fbpriv->drm;
> + struct device_node *np = dev->of_node;
> + int mem_word_width;
> + int max_h, max_w;
> + int ret;
> +
> + ret = of_property_read_u32(np, "altr,max-width", &max_w);
> + if (ret) {
> + dev_err(dev,
> + "Missing required parameter 'altr,max-width'");
> + return ret;
> + }
> +
> + ret = of_property_read_u32(np, "altr,max-height", &max_h);
> + if (ret) {
> + dev_err(dev,
> + "Missing required parameter 'altr,max-height'");
> + return ret;
> + }
> +
> + ret = of_property_read_u32(np, "altr,mem-port-width", &mem_word_width);
> + if (ret) {
> + dev_err(dev, "Missing required parameter 'altr,mem-port-width '");
> + return ret;
> + }
> +
> + if (!(mem_word_width >= 32 && mem_word_width % 32 == 0)) {
> + dev_err(dev,
> + "mem-word-width is set to %i. must be >= 32 and multiple of 32.",
> + mem_word_width);
> + return -ENODEV;
> + }
> +
> + drm->mode_config.min_width = 640;
> + drm->mode_config.min_height = 480;
> + drm->mode_config.max_width = max_w;
> + drm->mode_config.max_height = max_h;
> + drm->mode_config.preferred_depth = 32;
> +
> + return 0;
> +}
> +
> +static int intelvipfb_of_probe(struct platform_device *pdev)
> +{
> + int retval;
> + struct resource *reg_res;
> + struct intelvipfb_priv *fbpriv;
> + struct device *dev = &pdev->dev;
> + struct drm_device *drm;
> +
> + fbpriv = devm_kzalloc(dev, sizeof(*fbpriv), GFP_KERNEL);
> + if (!fbpriv)
> + return -ENOMEM;
> +
> + /*setup DRM */
> + drm = drm_dev_alloc(&intelvipfb_drm, dev);
> + if (IS_ERR(drm))
> + return PTR_ERR(drm);
> +
> + retval = dma_set_mask_and_coherent(drm->dev, DMA_BIT_MASK(32));
> + if (retval)
> + return -ENODEV;
> +
> + fbpriv->drm = drm;
> +
> + reg_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + if (!reg_res)
> + return -ENOMEM;
> +
> + fbpriv->base = devm_ioremap_resource(dev, reg_res);
> +
> + if (IS_ERR(fbpriv->base)) {
> + dev_err(dev, "devm_ioremap_resource failed\n");
> + retval = PTR_ERR(fbpriv->base);
> + return -ENOMEM;
> + }
> +
> + intelvipfb_drm_setup(dev, fbpriv);
> +
> + dev_set_drvdata(dev, fbpriv);
> +
> + return intelvipfb_probe(dev);
> +}
> +
> +static int intelvipfb_of_remove(struct platform_device *pdev)
> +{
> + return intelvipfb_remove(&pdev->dev);
> +}
> +
> +/*
> + * The name vip-frame-buffer-2.0 is derived from
> + * http://www.altera.com/literature/ug/ug_vip.pdf
> + * frame buffer IP cores section 14
> + */
> +
> +static const struct of_device_id intelvipfb_of_match[] = {
> + { .compatible = "altr,vip-frame-buffer-2.0" },
> + {},
> +};
> +
> +MODULE_DEVICE_TABLE(of, intelvipfb_of_match);
> +
> +static struct platform_driver intelvipfb_driver = {
> + .probe = intelvipfb_of_probe,
> + .remove = intelvipfb_of_remove,
> + .driver = {
> + .name = DRIVER_NAME,
> + .of_match_table = intelvipfb_of_match,
> + },
> +};
> +
> +module_platform_driver(intelvipfb_driver);
More information about the dri-devel
mailing list