[git pull] drm for 4.19-rc1
Daniel Vetter
daniel at ffwll.ch
Thu Aug 16 20:46:30 UTC 2018
On Thu, Aug 16, 2018 at 10:38 PM, John Stultz <john.stultz at linaro.org> wrote:
> On Thu, Aug 16, 2018 at 12:16 AM, Daniel Vetter <daniel at ffwll.ch> wrote:
>> On Thu, Aug 16, 2018 at 8:04 AM, John Stultz <john.stultz at linaro.org> wrote:
>>> On Tue, Aug 14, 2018 at 7:53 PM, Dave Airlie <airlied at gmail.com> wrote:
>>>> This is the main drm pull request for 4.19.
>>>>
>>>> Rob has some new hardware support for new qualcomm hw that I'll send along
>>>> separately. This has the display part of it, the remaining pull is for the
>>>> acceleration engine.
>>>>
>>>> This also contains a wound-wait/wait-die mutex rework, Peter has acked it
>>>> for merging via my tree.
>>>>
>>>> Otherwise mostly the usual level of activity.
>>>
>>> Hey Folks,
>>> Since this branch landed, I've been seeing the following panic on
>>> bootup w/ the HiKey board (which uses the hisilicon/kirin drm driver):
>>>
>>> [ 8.088388] Unable to handle kernel read from unreadable memory at
>>> virtual address 0000000000000030
>>> [ 8.088393] Mem abort info:
>>> [ 8.088397] ESR = 0x96000005
>>> [ 8.088402] Exception class = DABT (current EL), IL = 32 bits
>>> [ 8.088406] SET = 0, FnV = 0
>>> [ 8.088410] EA = 0, S1PTW = 0
>>> [ 8.088413] Data abort info:
>>> [ 8.088417] ISV = 0, ISS = 0x00000005
>>> [ 8.088421] CM = 0, WnR = 0
>>> [ 8.088427] user pgtable: 4k pages, 39-bit VAs, pgdp = (____ptrval____)
>>> [ 8.088432] [0000000000000030] pgd=0000000000000000, pud=0000000000000000
>>> [ 8.088443] Internal error: Oops: 96000005 [#1] PREEMPT SMP
>>> [ 8.088453] CPU: 5 PID: 1414 Comm: kworker/5:2 Tainted: G W
>>> 4.18.0-07439-gbf1fba4 #633
>>> [ 8.088457] Hardware name: HiKey Development Board (DT)
>>> [ 8.088474] Workqueue: events adv7511_hpd_work
>>> [ 8.088482] pstate: 40400005 (nZcv daif +PAN -UAO)
>>> [ 8.088493] pc : drm_sysfs_hotplug_event+0x40/0x78
>>> [ 8.088499] lr : drm_sysfs_hotplug_event+0x40/0x78
>>> [ 8.088502] sp : ffffff800ba73d20
>>> [ 8.088506] x29: ffffff800ba73d20 x28: 0000000000000000
>>> [ 8.088514] x27: ffffff8009293cd8 x26: ffffffc074e55938
>>> [ 8.088522] x25: 0000000000000000 x24: ffffffc07ff85000
>>> [ 8.088530] x23: ffffffc0742c4a78 x22: ffffffc07ff86c00
>>> [ 8.088537] x21: ffffffc0750d0e00 x20: 0000000000000000
>>> [ 8.088545] x19: ffffff8009009a48 x18: 0000000000000000
>>> [ 8.088552] x17: 0000000000000000 x16: ffffffc074fbde80
>>> [ 8.088560] x15: 0000000000000000 x14: ffffffc005f96c00
>>> [ 8.088568] x13: 00000040770c9000 x12: 0000000034d5d91d
>>> [ 8.088575] x11: 0000000000000000 x10: 0000000000000990
>>> [ 8.088582] x9 : ffffff800ba739b0 x8 : ffffff800913e000
>>> [ 8.088589] x7 : 0000000000000000 x6 : ffffff8009009a48
>>> [ 8.088596] x5 : ffffff80090588d0 x4 : 0000000000000000
>>> [ 8.088602] x3 : ffffff8009009a48 x2 : 0000000000000000
>>> [ 8.088608] x1 : 18701cfc97cf1200 x0 : 0000000000000000
>>> [ 8.120775] Process kworker/5:2 (pid: 1414, stack limit = 0x(____ptrval____))
>>> [ 8.120778] Call trace:
>>> [ 8.120787] drm_sysfs_hotplug_event+0x40/0x78
>>> [ 8.120794] drm_kms_helper_hotplug_event+0x14/0x40
>>> [ 8.120800] adv7511_hpd_work+0x64/0xe0
>>> [ 8.120807] process_one_work+0x12c/0x320
>>> [ 8.120814] worker_thread+0x48/0x458
>>> [ 8.126654] kthread+0xf8/0x128
>>> [ 8.126661] ret_from_fork+0x10/0x18
>>> [ 8.126672] Code: aa0003f4 52800020 a902ffa2 94006637 (f9401a80)
>>> [ 8.135638] ---[ end trace cf7120942e6f40fa ]---
>>>
>>> And earlier in boot we see:
>>>
>>> [ 4.620909] kirin-drm f4100000.ade: bound f4107800.dsi (ops dsi_ops)
>>> [ 4.627304] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>>> [ 4.633935] [drm] No driver support for vblank timestamp query.
>>> [ 4.732910] kirin-drm f4100000.ade: [drm:drm_fb_helper_fbdev_setup]
>>> *ERROR* Failed to set fbdev configuration
>>> [ 4.742948] [drm:kirin_drm_bind] *ERROR* failed to initialize fbdev.
>>> [ 4.749585] kirin-drm f4100000.ade: master bind failed: -22
>>> [ 4.755218] dw-dsi: probe of f4107800.dsi failed with error -22
>>>
>>> I've also seen similar trouble w/ the HiKey960 which uses a similar
>>> but still out of tree driver that also utilizes the cma fbhelper code,
>>> which makes me suspect it has to do with the drm/cma-helper changes
>>> below:
>>>
>>>> Noralf Trønnes (15):
>>>> drm/file: Don't set master on in-kernel clients
>>>> drm: Make ioctls available for in-kernel clients
>>>> drm: Begin an API for in-kernel clients
>>>> drm/fb-helper: Add generic fbdev emulation .fb_probe function
>>>> drm/pl111: Set .gem_prime_vmap and .gem_prime_mmap
>>>> drm/cma-helper: Use the generic fbdev emulation
>>>> drm/debugfs: Add internal client debugfs file
>>>> drm/fb-helper: Finish the generic fbdev emulation
>>>> drm/tinydrm: Use drm_fbdev_generic_setup()
>>>> drm/cma-helper: Remove drm_fb_cma_fbdev_init_with_funcs()
>>>
>>> Though I've not yet had time to bisect this down tonight.
>>>
>>> I'll spend some more time on this tomorrow, but wanted to give folks a
>>> heads up in the meantime.
>>
>> Hm, not immediately seeing what's going boom here. Bisect would indeed
>> be good, but maybe we need to chase the callchain to figure out where
>> exactly that -EINVAL is coming from in the reworked code (and why
>> hikey is the first to hit that, there's lots of cma based drivers
>> after all).
>
> So I can confirm reverting:
> 85b5bafb86e6 ("drm/cma-helper: Remove drm_fb_cma_fbdev_init_with_funcs()")
> and
> 894a677f4b3e ("drm/cma-helper: Use the generic fbdev emulation")
>
> makes things work again.
>
> Though without the reverts, I was digging to understand what was
> failing, and it seems when we call into
> drm_client_framebuffer_create(), as Noralf suggested, we're eventually
> failing at drm_internal_framebuffer_create() when checking
> config->max_height. The kirin driver is somewhat limited w/ max
> width/height values at 2048 each.
>
> Though I'm on a 1920x1080 monitor (max resolution supported by the
> board), it seems we're trying to allocate a 1920x2160 buffer? I know
> Android tries to allocate 2x Y for page-flipping, but I'm not sure yet
> why the old code didn't hit this problem.
>
> Unfortunately bumping the max width/height values to 4096 cause the
> system to hard hang as userspace starts up (and setting it to
> 2048/2160 does the same).
>
> So yea, I'm going to continue to dig at the hard-hang issue, and
> hopefully we can just bump the max width/height, but if there are
> other suggestions, please let me know.
You happen to have set drm_fb_overalloc respectively
CONFIG_DRM_FBDEV_OVERALLOC? Was added so that mali blob can pageflip,
would explain what's going on at least.
-Daniel
--
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
More information about the dri-devel
mailing list