[PATCH v5 0/8] drm/rockchip: migrate to common dw-mipi-dsi bridge and dual-dsi
Heiko Stuebner
heiko at sntech.de
Tue Aug 21 14:05:08 UTC 2018
The Rockchip DSI driver was separate till now, not using the common
bridge driver that was introduced a bit later. So this series migrates
over to use that common bridge driver and then also adds support for
dual-dsi to both the bridge and Rockchip glue code.
The bridge-migration itself is based on Nickeys earlier v8
work, but adapted to current kernels and with a new split between probe
and bind, so that we do not create and drop the dsi-host on each deferred
bind attempt.
changes in v2:
- rebase against newer drm code (dsi-bridge+rockchip changes)
- add SPDX header to new glue driver
- expect regular interface lanes from panel (like 4) not the double number
Similar to tegra
- keep links to both master and slave
changes in v3:
- don't defer in bridge_attach, instead add ability to check for finalized
panel attachement, for example in bind
- address bridge-conversion comments from Andrzej:
- include ordering
- moved hwaccess from mode_set to enable callback
- move pllref_clk enablement to bind (needed by bridge mode_set->lane_mbps)
- limited slave settings to dw_mipi_dsi_set_slave
- address dual-dsi comments from Philippe:
- remove unneeded separate variables
- remove unneeded second slave settings
- disable slave before master
- lane-sum calculation comments
changes in v4:
- rebase against some legacy rockchip-dsi changes
- add dsi-component only after panel has attached to dsi host
This solves quite some concurrency problems that happen when trying
to determine dsi-panel availability
changes in v5:
- use driver-internal method to find second host
- drop of-graph based dsi method for it
Unchanged from review comments:
- kept dw_mipi_dsi_bind, as the dsi->bridge member is only part of the
bridge drivers struct, so not accessible from glue drivers
- kept dual-dsi handling that mimicks tegra
Heiko Stuebner (4):
drm/bridge/synopsys: dsi: move mipi_dsi_host_unregister to
__dw_mipi_dsi_remove
drm/bridge/synopsys: dsi: don't call __dw_mipi_dsi_probe from
dw_mipi_dsi_bind
drm/bridge/synopsys: dsi: add ability to have glue-specific attach and
detach
drm/rockchip: dsi: add dual mipi support
Nickey Yang (3):
dt-bindings: display: rockchip: update DSI controller
drm/rockchip: dsi: migrate to use dw-mipi-dsi bridge driver
drm/bridge/synopsys: dsi: add dual-dsi support
.../display/rockchip/dw_mipi_dsi_rockchip.txt | 23 +-
drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c | 114 +-
drivers/gpu/drm/rockchip/Kconfig | 2 +-
drivers/gpu/drm/rockchip/Makefile | 2 +-
.../gpu/drm/rockchip/dw-mipi-dsi-rockchip.c | 1044 +++++++++++++
drivers/gpu/drm/rockchip/dw-mipi-dsi.c | 1349 -----------------
drivers/gpu/drm/rockchip/rockchip_drm_drv.c | 2 +-
drivers/gpu/drm/rockchip/rockchip_drm_drv.h | 3 +-
drivers/gpu/drm/rockchip/rockchip_drm_vop.c | 3 +
drivers/gpu/drm/rockchip/rockchip_drm_vop.h | 4 +
drivers/gpu/drm/rockchip/rockchip_vop_reg.c | 1 +
include/drm/bridge/dw_mipi_dsi.h | 14 +-
12 files changed, 1182 insertions(+), 1379 deletions(-)
create mode 100644 drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c
delete mode 100644 drivers/gpu/drm/rockchip/dw-mipi-dsi.c
--
2.17.0
More information about the dri-devel
mailing list