[PATCH v2 4/7] drm/i2c: tda998x: convert to bridge driver

[Russell King - ARM Linux]

Hi Andrzej,

On Mon, Aug 27, 2018 at 06:15:59PM +0200, Andrzej Hajda wrote:
> On 30.07.2018 18:42, Russell King wrote:
> >  static void tda998x_destroy(struct tda998x_priv *priv)
> >  {
> > +	drm_bridge_remove(&priv->bridge);
> > +
> >  	/* disable all IRQs and free the IRQ handler */
> >  	cec_write(priv, REG_CEC_RXSHPDINTENA, 0);
> >  	reg_clear(priv, REG_INT_FLAGS_2, INT_FLAGS_2_EDID_BLK_RD);
> > @@ -1650,6 +1663,7 @@ static int tda998x_create(struct i2c_client *client, struct tda998x_priv *priv)
> >  	mutex_init(&priv->mutex);	/* protect the page access */
> >  	mutex_init(&priv->audio_mutex); /* protect access from audio thread */
> >  	mutex_init(&priv->edid_mutex);
> > +	INIT_LIST_HEAD(&priv->bridge.list);
> 
> This line can be probably removed, unless there is a reason I am not
> aware of.

The addition above of drm_bridge_remove() to tda998x_destroy() means
that we end up calling this function in the error cleanup path.  This
avoids unnecessary complexity with lots of different gotos - tda998x
has had a long history of not cleaning up stuff properly.

devm interfaces for bridge do not help avoid that - devm stuff only
works if everything that is registered previously is cleaned up via
devm mechanisms to ensure that a device's interface becomes unavailable
before stuff (eg, edid timers, detect work) is started to be cleaned up.
Otherwise, there's a chance of this stuff being triggered during
tear-down.

> > +static int tda998x_bind(struct device *dev, struct device *master, void *data)
> > +{
> > +	struct i2c_client *client = to_i2c_client(dev);
> > +	struct drm_device *drm = data;
> > +	struct tda998x_priv *priv;
> > +	int ret;
> > +
> > +	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> > +	if (!priv)
> > +		return -ENOMEM;
> > +
> > +	dev_set_drvdata(dev, priv);
> > +
> > +	ret = tda998x_create(client, priv);
> > +	if (ret)
> > +		return ret;
> > +
> > +	ret = tda998x_encoder_init(dev, drm);
> > +	if (ret) {
> > +		tda998x_destroy(priv);
> > +		return ret;
> > +	}
> > +	return 0;
> 
> It could be replaced by:
>     ret = tda998x_encoder_init(dev, drm);
>     if (ret)
>         tda998x_destroy(priv);
>     return ret;
> 
> but this is probably matter of taste.

It's not clear to me what "It" is - I think you're suggesting combining
tda998x_create() and tda998x_encoder_init() ?

The code is structured this way to make the following patches easier -
there is no point of combining things only to have to then break them
apart again in a later patch.  Please see patch 7, where tda998x_create()
moves out of this function, where exactly this happens.

> Moreover I guess priv->is_on could be removed if enable/disable
> callbacks are called only by drm_core, but this is for another patch.

Is it guaranteed that a bridge ->enable or ->disable callback won't be
called twice, even for legacy drivers?  I think atomic guarantees this
but I don't think it's guaranteed for legacy drivers.

I'm guessing Rob had a reason why he added the check when he originally
created the driver (encoder ->dpms can be called for the same dpms
state multiple times?)

-- 
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 13.8Mbps down 630kbps up
According to speedtest.net: 13Mbps down 490kbps up